Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 222 deletions

diff --git a/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino b/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino
deleted file mode 100644
index bfbcb6d..0000000
--- a/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
-  SCP1000 Barometric Pressure Sensor Display
- 
- Serves the output of a Barometric Pressure Sensor as a web page.
- Uses the SPI library. For details on the sensor, see:
- http://www.sparkfun.com/commerce/product_info.php?products_id=8161
- http://www.vti.fi/en/support/obsolete_products/pressure_sensors/
- 
- This sketch adapted from Nathan Seidle's SCP1000 example for PIC:
- http://www.sparkfun.com/datasheets/Sensors/SCP1000-Testing.zip
- 
- Circuit:
- SCP1000 sensor attached to pins 6,7, and 11 - 13:
- DRDY: pin 6
- CSB: pin 7
- MOSI: pin 11
- MISO: pin 12
- SCK: pin 13
- 
- created 31 July 2010
- by Tom Igoe
- */
-
-#include <Ethernet.h>
-// the sensor communicates using SPI, so include the library:
-#include <SPI.h>
-
-
-// assign a MAC address for the ethernet controller.
-// fill in your address here:
-byte mac[] = { 
-  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
-// assign an IP address for the controller:
-IPAddress ip(192,168,1,20);
-IPAddress gateway(192,168,1,1);	
-IPAddress subnet(255, 255, 255, 0);
-
-
-// Initialize the Ethernet server library
-// with the IP address and port you want to use 
-// (port 80 is default for HTTP):
-EthernetServer server(80);
-
-
-//Sensor's memory register addresses:
-const int PRESSURE = 0x1F;      //3 most significant bits of pressure
-const int PRESSURE_LSB = 0x20;  //16 least significant bits of pressure
-const int TEMPERATURE = 0x21;   //16 bit temperature reading
-
-// pins used for the connection with the sensor
-// the others you need are controlled by the SPI library):
-const int dataReadyPin = 6; 
-const int chipSelectPin = 7;
-
-float temperature = 0.0;
-long pressure = 0;
-long lastReadingTime = 0;
-
-void setup() {
-  // start the SPI library:
-  SPI.begin();
-
-  // start the Ethernet connection and the server:
-  Ethernet.begin(mac, ip);
-  server.begin();
-
-  // initalize the  data ready and chip select pins:
-  pinMode(dataReadyPin, INPUT);
-  pinMode(chipSelectPin, OUTPUT);
-
-  Serial.begin(9600);
-
-  //Configure SCP1000 for low noise configuration:
-  writeRegister(0x02, 0x2D);
-  writeRegister(0x01, 0x03);
-  writeRegister(0x03, 0x02);
-
-  // give the sensor and Ethernet shield time to set up:
-  delay(1000);
-
-  //Set the sensor to high resolution mode tp start readings:
-  writeRegister(0x03, 0x0A);
-
-}
-
-void loop() { 
-  // check for a reading no more than once a second.
-  if (millis() - lastReadingTime > 1000){
-    // if there's a reading ready, read it:
-    // don't do anything until the data ready pin is high:
-    if (digitalRead(dataReadyPin) == HIGH) {
-      getData();
-      // timestamp the last time you got a reading:
-      lastReadingTime = millis();
-    }
-  }
-
-  // listen for incoming Ethernet connections:
-  listenForEthernetClients();
-}
-
-
-void getData() {
-  Serial.println("Getting reading");
-  //Read the temperature data
-  int tempData = readRegister(0x21, 2);
-
-  // convert the temperature to celsius and display it:
-  temperature = (float)tempData / 20.0;
-
-  //Read the pressure data highest 3 bits:
-  byte  pressureDataHigh = readRegister(0x1F, 1);   
-  pressureDataHigh &= 0b00000111; //you only needs bits 2 to 0
-
-  //Read the pressure data lower 16 bits:
-  unsigned int pressureDataLow = readRegister(0x20, 2);    
-  //combine the two parts into one 19-bit number:
-  pressure = ((pressureDataHigh << 16) | pressureDataLow)/4;
-
-  Serial.print("Temperature: ");
-  Serial.print(temperature);
-  Serial.println(" degrees C");
-  Serial.print("Pressure: " + String(pressure));
-  Serial.println(" Pa");
-}
-
-void listenForEthernetClients() {
-  // listen for incoming clients
-  EthernetClient client = server.available();
-  if (client) {
-    Serial.println("Got a client");
-    // an http request ends with a blank line
-    boolean currentLineIsBlank = true;
-    while (client.connected()) {
-      if (client.available()) {
-        char c = client.read();
-        // if you've gotten to the end of the line (received a newline
-        // character) and the line is blank, the http request has ended,
-        // so you can send a reply
-        if (c == '\n' && currentLineIsBlank) {
-          // send a standard http response header
-          client.println("HTTP/1.1 200 OK");
-          client.println("Content-Type: text/html");
-          client.println();
-          // print the current readings, in HTML format:
-          client.print("Temperature: ");
-          client.print(temperature);
-          client.print(" degrees C");
-          client.println("<br />");
-          client.print("Pressure: " + String(pressure));
-          client.print(" Pa");
-          client.println("<br />");  
-          break;
-        }
-        if (c == '\n') {
-          // you're starting a new line
-          currentLineIsBlank = true;
-        } 
-        else if (c != '\r') {
-          // you've gotten a character on the current line
-          currentLineIsBlank = false;
-        }
-      }
-    }
-    // give the web browser time to receive the data
-    delay(1);
-    // close the connection:
-    client.stop();
-  }
-} 
-
-
-//Send a write command to SCP1000
-void writeRegister(byte registerName, byte registerValue) {
-  // SCP1000 expects the register name in the upper 6 bits
-  // of the byte:
-  registerName <<= 2;
-  // command (read or write) goes in the lower two bits:
-  registerName |= 0b00000010; //Write command
-
-  // take the chip select low to select the device:
-  digitalWrite(chipSelectPin, LOW); 
-
-  SPI.transfer(registerName); //Send register location
-  SPI.transfer(registerValue); //Send value to record into register
-
-  // take the chip select high to de-select:
-  digitalWrite(chipSelectPin, HIGH); 
-}
-
-
-//Read register from the SCP1000:
-unsigned int readRegister(byte registerName, int numBytes) {
-  byte inByte = 0;           // incoming from  the SPI read
-  unsigned int result = 0;   // result to return 
-
-  // SCP1000 expects the register name in the upper 6 bits
-  // of the byte:
-  registerName <<=  2;
-  // command (read or write) goes in the lower two bits:
-  registerName &= 0b11111100; //Read command
-
-  // take the chip select low to select the device:
-  digitalWrite(chipSelectPin, LOW); 
-  // send the device the register you want to read:
-  int command = SPI.transfer(registerName); 
-  // send a value of 0 to read the first byte returned:
-  inByte = SPI.transfer(0x00); 
-  
-  result = inByte;
-  // if there's more than one byte returned, 
-  // shift the first byte then get the second byte:
-  if (numBytes > 1){
-    result = inByte << 8;
-    inByte = SPI.transfer(0x00); 
-    result = result |inByte;
-  }
-  // take the chip select high to de-select:
-  digitalWrite(chipSelectPin, HIGH); 
-  // return the result:
-  return(result);
-}