Esplora library to new format

1 files changed, 0 insertions, 116 deletions

diff --git a/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino b/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino
deleted file mode 100644
index 2701089..0000000
--- a/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
-  Esplora Remote
- 
- This sketch allows to test all the Esplora's peripherals.
- It is also used with the ProcessingStart sketch (for Processing).
- 
- When uploaded, you can open the Serial monitor and write one of
- the following commands (without quotes) to get an answer:
- 
- "D": prints the current value of all sensors, separated by a comma.
- See the dumpInputs() function below to get the meaning of
- each value.
- 
- "Rxxx"
- "Gxxx"
- "Bxxx": set the color of the RGB led. For example, write "R255"
- to turn on the red to full brightness, "G128" to turn
- the green to half brightness, or "G0" to turn off
- the green channel.
- 
- "Txxxx": play a tone with the buzzer. The number is the
- frequency, e.g. "T440" plays the central A note.
- Write "T0" to turn off the buzzer.
- 
- 
- Created on 22 november 2012
- By Enrico Gueli <enrico.gueli@gmail.com>
- Modified 23 Dec 2012
- by Tom Igoe
- */
-
-#include <Esplora.h>
-
-void setup() {
-  while(!Serial); // needed for Leonardo-based board like Esplora
-  Serial.begin(9600);
-}
-
-void loop() {
-  if (Serial.available())
-    parseCommand();
-}
-
-/*
- * This function reads a character from the serial line and
- * decide what to do next. The "what to do" part is given by
- * function it calls (e.g. dumpInputs(), setRed() and so on).
- */
-void parseCommand() {
-  char cmd = Serial.read();
-  switch(cmd) {
-  case 'D': 
-    dumpInputs(); 
-    break;
-  case 'R': 
-    setRed(); 
-    break;
-  case 'G': 
-    setGreen(); 
-    break;
-  case 'B': 
-    setBlue(); 
-    break;
-  case 'T': 
-    setTone(); 
-    break;
-  }
-}
-
-void dumpInputs() {  
-  Serial.print(Esplora.readButton(SWITCH_1)); 
-  Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_2)); 
-  Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_3)); 
-  Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_4)); 
-  Serial.print(',');
-  Serial.print(Esplora.readSlider());         
-  Serial.print(',');
-  Serial.print(Esplora.readLightSensor());    
-  Serial.print(',');
-  Serial.print(Esplora.readTemperature(DEGREES_C)); 
-  Serial.print(',');
-  Serial.print(Esplora.readMicrophone());     
-  Serial.print(',');
-  Serial.print(Esplora.readJoystickSwitch()); 
-  Serial.print(',');
-  Serial.print(Esplora.readJoystickX());      
-  Serial.print(',');
-  Serial.print(Esplora.readJoystickY());      
-  Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(X_AXIS)); 
-  Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(Y_AXIS)); 
-  Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(Z_AXIS)); 
-  Serial.println();
-}
-
-void setRed() {
-  Esplora.writeRed(Serial.parseInt());
-}
-
-void setGreen() {
-  Esplora.writeGreen(Serial.parseInt());
-}
-
-void setBlue() {
-  Esplora.writeBlue(Serial.parseInt());
-}
-
-void setTone() {
-  Esplora.tone(Serial.parseInt());
-}
-