Examples: mass code format. See example_formatter.conf

1 files changed, 16 insertions, 14 deletions

diff --git a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
index f07446c..f9bea64 100644
--- a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
+++ b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
@@ -9,18 +9,19 @@
 #include <EEPROM.h>
 
 /** the current address in the EEPROM (i.e. which byte we're going to write to next) **/
-int addr = 0; 
+int addr = 0;
 
-void setup(){ /** Empty setup. **/}
+void setup() {
+  /** Empty setup. **/
+}
 
-void loop()
-{
+void loop() {
   /***
     Need to divide by 4 because analog inputs range from
     0 to 1023 and each byte of the EEPROM can only hold a
     value from 0 to 255.
   ***/
-  
+
   int val = analogRead(0) / 4;
 
   /***
@@ -28,28 +29,29 @@ void loop()
     these values will remain there when the board is
     turned off.
   ***/
-  
+
   EEPROM.write(addr, val);
 
   /***
-    Advance to the next address, when at the end restart at the beginning.    
-    
+    Advance to the next address, when at the end restart at the beginning.
+
     Larger AVR processors have larger EEPROM sizes, E.g:
     - Arduno Duemilanove: 512b EEPROM storage.
     - Arduino Uno:        1kb EEPROM storage.
     - Arduino Mega:       4kb EEPROM storage.
-    
+
     Rather than hard-coding the length, you should use the pre-provided length function.
-    This will make your code portable to all AVR processors.    
+    This will make your code portable to all AVR processors.
   ***/
   addr = addr + 1;
-  if(addr == EEPROM.length())
+  if (addr == EEPROM.length()) {
     addr = 0;
-    
+  }
+
   /***
-    As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an 
+    As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an
     EEPROM address is also doable by a bitwise and of the length - 1.
-    
+
     ++addr &= EEPROM.length() - 1;
   ***/