Bridge library to the 1.5 format

1 files changed, 0 insertions, 78 deletions

diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
deleted file mode 100644
index faffd93..0000000
--- a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-  Arduino Yun USB-to-Serial
- 
- Allows you to use the Yun's 32U4 processor as a
- serial terminal for the linino processor.
- 
- Upload this to an Arduino Yun via serial (not WiFi) 
- then open the serial monitor at 115200 to see the boot process
- of the linino processor. You can also use the serial monitor
- as a basic command line interface for the linino processor using 
- this sketch.
- 
- From the serial monitor the following commands can be issued:
- 
- '~' followed by '0' -> Set the UART speed to 57600 baud
- '~' followed by '1' -> Set the UART speed to 115200 baud
- '~' followed by '2' -> Set the UART speed to 250000 baud
- '~' followed by '3' -> Set the UART speed to 500000 baud
- '~' followeb by '~' -> Sends the bridge's shutdown command to
-                        obtain the console.
-                        
- The circuit:
- * Arduino Yun
- 
- created March 2013
- by Massimo Banzi
- modified by Cristian Maglie
- 
- This example code is in the public domain.
- */
-
-long lininoBaud = 250000;
-
-void setup() {
-  Serial.begin(115200);      // open serial connection via USB-Serial
-  Serial1.begin(lininoBaud); // open serial connection to Linino
-}
-
-boolean commandMode = false;
-
-void loop() {
-  // copy from virtual serial line to uart and vice versa
-  if (Serial.available()) {           // got anything from USB-Serial?
-    char c = (char)Serial.read();     // read from USB-serial
-    if (commandMode == false) {       // if we aren't in command mode...
-      if (c == '~') {                 //    Tilde '~' key pressed?
-        commandMode = true;           //       enter in command mode
-      } else {
-        Serial1.write(c);             //    otherwise write char to Linino
-      }
-    } else {                          // if we are in command mode...
-      if (c == '0') {                 //     '0' key pressed?
-        Serial1.begin(57600);         //        set speed to 57600
-        Serial.println("Speed set to 57600");
-      } else if (c == '1') {          //     '1' key pressed?
-        Serial1.begin(115200);        //        set speed to 115200
-        Serial.println("Speed set to 115200");
-      } else if (c == '2') {          //     '2' key pressed?
-        Serial1.begin(250000);        //        set speed to 250000
-        Serial.println("Speed set to 250000");
-      } else if (c == '3') {          //     '3' key pressed?
-        Serial1.begin(500000);        //        set speed to 500000
-        Serial.println("Speed set to 500000");
-      } else if (c == '~') {
-        Serial1.write((uint8_t *)"\xff\0\0\x05XXXXX\x0d\xaf", 11);
-        Serial.println("Sending bridge's shutdown command");
-      } else {                        //     any other key pressed?
-        Serial1.write('~');           //        write '~' to Linino
-        Serial1.write(c);             //        write char to Linino
-      }
-      commandMode = false;            //     in all cases exit from command mode
-    }
-  }
-  if (Serial1.available()) {          // got anything from Linino?         
-    char c = (char)Serial1.read();    // read from Linino  
-    Serial.write(c);                  // write to USB-serial
-  }
-}
\ No newline at end of file