Minor bug fixes to the 8U2 USB-to-serial firmware.

2 files changed, 18 insertions, 19 deletions

diff --git a/firmwares/arduino-usbserial/Arduino-usbserial.c b/firmwares/arduino-usbserial/Arduino-usbserial.c
index a2bdfb1..4de73c8 100755
--- a/firmwares/arduino-usbserial/Arduino-usbserial.c
+++ b/firmwares/arduino-usbserial/Arduino-usbserial.c
@@ -88,10 +88,15 @@ int main(void)
 

 	for (;;)

 	{

-		/* Read bytes from the USB OUT endpoint into the USART transmit buffer */

-		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);

-		if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))

-		  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);		

+		/* Only try to read in bytes from the CDC interface if the transmit buffer is not full */

+		if (!(RingBuffer_IsFull(&USBtoUSART_Buffer)))

+		{

+			int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);

+

+			/* Read bytes from the USB OUT endpoint into the USART transmit buffer */

+			if (!(ReceivedByte < 0))

+			  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);

+		}

 		

 		/* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */

 		RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);

@@ -153,10 +158,7 @@ void SetupHardware(void)
 /** Event handler for the library USB Configuration Changed event. */

 void EVENT_USB_Device_ConfigurationChanged(void)

 {

-

-

-	if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface))) 

-		;

+	CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);

 }

 

 /** Event handler for the library USB Unhandled Control Request event. */

@@ -205,12 +207,13 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	UCSR1C = 0;

 

 	/* Special case 57600 baud for compatibility with the ATmega328 bootloader. */	

-	UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1);

-	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

-	UCSR1C = ConfigMask;    

 	UBRR1  = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600)

 			 ? SERIAL_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)

 			 : SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);	

+

+	UCSR1C = ConfigMask;

+	UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1);

+	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

 }

 

 /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer

@@ -233,11 +236,7 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C
 	bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR);

 

 	if (CurrentDTRState)

-	{

-		AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;

-	}

+	  AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;

 	else

-	{

-		AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;

-	}

+	  AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;

 }

diff --git a/firmwares/arduino-usbserial/Descriptors.c b/firmwares/arduino-usbserial/Descriptors.c
index e4ad956..025250e 100755
--- a/firmwares/arduino-usbserial/Descriptors.c
+++ b/firmwares/arduino-usbserial/Descriptors.c
@@ -172,7 +172,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),

 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),

 			.EndpointSize           = CDC_TXRX_EPSIZE,

-			.PollingIntervalMS      = 0x00

+			.PollingIntervalMS      = 0x01

 		},

 		

 	.CDC_DataInEndpoint = 

@@ -182,7 +182,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),

 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),

 			.EndpointSize           = CDC_TXRX_EPSIZE,

-			.PollingIntervalMS      = 0x00

+			.PollingIntervalMS      = 0x01

 		}

 };