Moving into firmwares directory.

1 files changed, 99 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifi_dnld/src/nor_flash.c b/firmwares/wifishield/wifi_dnld/src/nor_flash.c
new file mode 100644
index 0000000..0115949
--- /dev/null
+++ b/firmwares/wifishield/wifi_dnld/src/nor_flash.c
@@ -0,0 +1,99 @@
+/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*! \page License
+ * Copyright (C) 2009, H&D Wireless AB All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of H&D Wireless AB may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY H&D WIRELESS AB ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
+ * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include "compiler.h"
+#include "preprocessor.h"
+#include "board.h"
+#include "power_clocks_lib.h"
+#include "gpio.h"
+#include "spi.h"
+#include "conf_at45dbx.h"
+#include "at45dbx.h"
+#include "clocks.h"
+
+
+void flash_init(void)
+{
+        static const gpio_map_t AT45DBX_SPI_GPIO_MAP = {
+                { AT45DBX_SPI_SCK_PIN, AT45DBX_SPI_SCK_FUNCTION },
+                { AT45DBX_SPI_MISO_PIN, AT45DBX_SPI_MISO_FUNCTION },
+                { AT45DBX_SPI_MOSI_PIN, AT45DBX_SPI_MOSI_FUNCTION },
+                { AT45DBX_SPI_NPCS2_PIN, AT45DBX_SPI_NPCS2_FUNCTION },
+        };
+        
+        spi_options_t spiOptions = {
+                .reg          = AT45DBX_SPI_FIRST_NPCS,
+                .baudrate     = AT45DBX_SPI_MASTER_SPEED,
+                .bits         = AT45DBX_SPI_BITS,
+                .spck_delay   = 0,
+                .trans_delay  = 0,
+                .stay_act     = 1,
+                .spi_mode     = 0,
+                .modfdis      = 1
+        };
+    
+        gpio_enable_module(AT45DBX_SPI_GPIO_MAP,
+                           sizeof(AT45DBX_SPI_GPIO_MAP) /
+                           sizeof(AT45DBX_SPI_GPIO_MAP[0]));
+        
+        spi_initMaster(AT45DBX_SPI, &spiOptions);
+
+        spi_selectionMode(AT45DBX_SPI, 0, 0, 0);
+        spi_enable(AT45DBX_SPI);
+
+        /* put up flash reset pin */
+        gpio_set_gpio_pin(AT45DBX_CHIP_RESET);
+
+        at45dbx_init(spiOptions, FPBA_HZ);
+}
+
+void flash_write(U32 addr, const U8* buf, U32 len)
+{
+        U32 sector = addr / AT45DBX_SECTOR_SIZE;
+        U32 i;
+        Assert(addr % AT45DBX_SECTOR_SIZE == 0);
+        
+        at45dbx_write_open(sector);
+        for (i = 0; i < len; i++)
+                at45dbx_write_byte(buf[i]);
+        at45dbx_write_close();
+}
+
+void flash_read(U32 addr, U8* buf, U32 len)
+{
+        U32 sector = addr / AT45DBX_SECTOR_SIZE;
+        U32 i;
+        Assert(addr % AT45DBX_SECTOR_SIZE == 0);
+        
+        at45dbx_read_open(sector);
+        for (i = 0; i < len; i++)
+                buf[i] = at45dbx_read_byte();
+        at45dbx_read_close();
+}