Merge pull request #1 from dmadison/forking

Forking

1 files changed, 0 insertions, 450 deletions

diff --git a/firmwares/wifishield/wifiHD/src/lwipopts.h b/firmwares/wifishield/wifiHD/src/lwipopts.h
deleted file mode 100644
index 7b08b84..0000000
--- a/firmwares/wifishield/wifiHD/src/lwipopts.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/**
- * @file
- *
- * lwIP Options Configuration
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- * 
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-#ifndef __LWIPOPTS_H__
-#define __LWIPOPTS_H__
-
-#include "wl_api.h"
-#include <board.h>
-
-#ifndef BOARD
-#error "BOARD must be defined"
-#endif
-
-/*
-   -----------------------------------------------
-   ---------- Platform specific locking ----------
-   -----------------------------------------------
-*/
-
-/** 
- * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
- * use lwIP facilities.
- */
-#define NO_SYS                          1
-
-
-/*
-   ------------------------------------
-   ---------- Memory options ----------
-   ------------------------------------
-*/
-/**
- * MEM_ALIGNMENT: should be set to the alignment of the CPU
- *    4 byte alignment -> #define MEM_ALIGNMENT 4
- *    2 byte alignment -> #define MEM_ALIGNMENT 2
- */
-#define MEM_ALIGNMENT                   4
-
-/**
- * MEM_SIZE: the size of the heap memory. If the application will send
- * a lot of data that needs to be copied, this should be set high.
- */
-#define MEM_SIZE                        16000
-
-
-/*
-   ------------------------------------------------
-   ---------- Internal Memory Pool Sizes ----------
-   ------------------------------------------------
-*/
-/**
- * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
- * If the application sends a lot of data out of ROM (or other static memory),
- * this should be set high.
- */
-#if BOARD == EVK1101 /* Reduced RAM */
- #define MEMP_NUM_PBUF                   4
-#else
- #define MEMP_NUM_PBUF                   30
-#endif
-/**
- * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
- * (requires the LWIP_RAW option)
- */
-#define MEMP_NUM_RAW_PCB                4
-
-/**
- * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
- * per active UDP "connection".
- * (requires the LWIP_UDP option)
- */
-#define MEMP_NUM_UDP_PCB                4
-
-/**
- * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
- * (requires the LWIP_TCP option)
- */
-#define MEMP_NUM_TCP_PCB                4
-
-/**
- * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
- * (requires the LWIP_TCP option)
- */
-#define MEMP_NUM_TCP_PCB_LISTEN         2
-
-/**
- * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
- * (requires the LWIP_TCP option)
- */
-#if BOARD == EVK1101 /* Reduced RAM */
- #define MEMP_NUM_TCP_SEG                2
-#else
- #define MEMP_NUM_TCP_SEG                32
-#endif
-
-/**
- * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
- * packets (pbufs) that are waiting for an ARP request (to resolve
- * their destination address) to finish.
- * (requires the ARP_QUEUEING option)
- */
-#define MEMP_NUM_ARP_QUEUE              2
-
-/**
- * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
- * (requires NO_SYS==0)
- */
-#define MEMP_NUM_SYS_TIMEOUT            0
-
-/**
- * MEMP_NUM_NETBUF: the number of struct netbufs.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#define MEMP_NUM_NETBUF                 0
-
-/**
- * MEMP_NUM_NETCONN: the number of struct netconns.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#define MEMP_NUM_NETCONN                0
-
-/**
- * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
- * for callback/timeout API communication. 
- * (only needed if you use tcpip.c)
- */
-#define MEMP_NUM_TCPIP_MSG_API          0
-
-/**
- * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
- * for incoming packets. 
- * (only needed if you use tcpip.c)
- */
-#define MEMP_NUM_TCPIP_MSG_INPKT        0
-
-/**
- * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. 
- */
-#if BOARD == EVK1101 /* Reduced RAM */
-  #define PBUF_POOL_SIZE                  2
-#else
-  #define PBUF_POOL_SIZE                  32
-#endif
-/*
-   ---------------------------------
-   ---------- ARP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_ARP==1: Enable ARP functionality.
- */
-#define LWIP_ARP                        1
-
-/*
-   --------------------------------
-   ---------- IP options ----------
-   --------------------------------
-*/
-/**
- * IP_FORWARD==1: Enables the ability to forward IP packets across network
- * interfaces. If you are going to run lwIP on a device with only one network
- * interface, define this to 0.
- */
-#define IP_FORWARD                      0
-
-/**
- * IP_OPTIONS: Defines the behavior for IP options.
- *      IP_OPTIONS==0_ALLOWED: All packets with IP options are dropped.
- *      IP_OPTIONS==1_ALLOWED: IP options are allowed (but not parsed).
- */
-#define IP_OPTIONS_ALLOWED              1
-
-/**
- * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
- * this option does not affect outgoing packet sizes, which can be controlled
- * via IP_FRAG.
- */
-#define IP_REASSEMBLY                   1
-
-/**
- * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
- * that this option does not affect incoming packet sizes, which can be
- * controlled via IP_REASSEMBLY.
- */
-#define IP_FRAG                         1
-
-/**
- * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
- * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
- * in this time, the whole packet is discarded.
- */
-#define IP_REASS_MAXAGE                 3
-
-/**
- * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
- * Since the received pbufs are enqueued, be sure to configure
- * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
- * packets even if the maximum amount of fragments is enqueued for reassembly!
- */
-#if BOARD == EVK1101 /* Reduced RAM */
- #define IP_REASS_MAX_PBUFS              PBUF_POOL_SIZE
- #define MEMP_NUM_REASSDATA              PBUF_POOL_SIZE-1
-#else
- #define IP_REASS_MAX_PBUFS              10
-#endif
-
-/**
- * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
- * fragmentation. Otherwise pbufs are allocated and reference the original
- * packet data to be fragmented.
- */
-#define IP_FRAG_USES_STATIC_BUF         0
-
-/**
- * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
- */
-#define IP_DEFAULT_TTL                  255
-
-/*
-   ----------------------------------
-   ---------- ICMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
- * Be careful, disable that make your product non-compliant to RFC1122
- */
-#define LWIP_ICMP                       1
-
-/**
- * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
- */
-#define ICMP_TTL                       (IP_DEFAULT_TTL)
-
-/*
-   ---------------------------------
-   ---------- RAW options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#define LWIP_RAW                        1
-
-/*
-   ----------------------------------
-   ---------- DHCP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_DHCP==1: Enable DHCP module.
- */
-#define LWIP_DHCP                       1
-
-/*
-   ------------------------------------
-   ---------- AUTOIP options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_AUTOIP==1: Enable AUTOIP module.
- */
-#define LWIP_AUTOIP                     0
-
-/*
-   ----------------------------------
-   ---------- SNMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
- * transport.
- */
-#define LWIP_SNMP                       0
-#define SNMP_PRIVATE_MIB                0
-
-/*
-   ----------------------------------
-   ---------- IGMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_IGMP==1: Turn on IGMP module. 
- */
-#define LWIP_IGMP                       0
-
-/*
-   ----------------------------------
-   ---------- DNS options -----------
-   ----------------------------------
-*/
-/**
- * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
- * transport.
- */
-#define LWIP_DNS                        1
-
-/*
-   ---------------------------------
-   ---------- UDP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_UDP==1: Turn on UDP.
- */
-#define LWIP_UDP                        1
-
-/**
- * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
- */
-#define LWIP_UDPLITE                    0
-
-/**
- * UDP_TTL: Default Time-To-Live value.
- */
-#define UDP_TTL                         (IP_DEFAULT_TTL)
-
-/*
-   ---------------------------------
-   ---------- TCP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_TCP==1: Turn on TCP.
- */
-#define LWIP_TCP                        1
-
-/*
-   ----------------------------------
-   ---------- Pbuf options ----------
-   ----------------------------------
-*/
-/**
- * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
- * link level header. The default is 14, the standard value for
- * Ethernet.
- */
-#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
-
-/*
-   ------------------------------------
-   ---------- LOOPIF options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
- */
-#define LWIP_HAVE_LOOPIF                1
-#define LWIP_LOOPIF_MULTITHREADING      0
-
-/*
-   ----------------------------------------------
-   ---------- Sequential layer options ----------
-   ----------------------------------------------
-*/
-
-/**
- * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
- */
-#define LWIP_NETCONN                    0
-
-/*
-   ------------------------------------
-   ---------- Socket options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
- */
-#define LWIP_SOCKET                     0
-
-/*
-   ----------------------------------------
-   ---------- Statistics options ----------
-   ----------------------------------------
-*/
-/**
- * LWIP_STATS==1: Enable statistics collection in lwip_stats.
- */
-#define LWIP_STATS                      1
-#define LINK_STATS                      1
-
-/* Misc */
-#define LWIP_NETIF_LINK_CALLBACK        1
-#define LWIP_NETIF_STATUS_CALLBACK      1
-#define LWIP_TIMEVAL_PRIVATE 0
-
-#undef DHCP_DOES_ARP_CHECK
-
-#if 0
-#define LWIP_DEBUG 1
-//#define NETIF_DEBUG LWIP_DBG_ON
-//#define DHCP_DEBUG LWIP_DBG_ON
-//#define ICMP_DEBUG LWIP_DBG_ON
-//#define TCP_DEBUG LWIP_DBG_ON
-//#define TCP_RTO_DEBUG LWIP_DBG_ON
-//#define IP_DEBUG LWIP_DBG_ON
-//#define TCP_CWND_DEBUG LWIP_DBG_ON
-//#define ETHARP_DEBUG LWIP_DBG_ON
-#define PBUF_DEBUG LWIP_DBG_ON
-//#define TCP_INPUT_DEBUG LWIP_DBG_ON
-//#define TCP_OUTPUT_DEBUG LWIP_DBG_ON
-#endif
-
-#define ETH_PAD_SIZE WL_HEADER_SIZE /* size of wifiengine header */
-#define MEM_LIBC_MALLOC 1
-
-#define TCP_MSS                         512
-#if BOARD == EVK1101 /* Reduced RAM */
- #define TCP_SND_BUF                     (1460*1) /* MTU (1500) - IP - TCP hdrs == 1460 */
-#else
- #define TCP_SND_BUF                     4096
-#endif
-#endif /* __LWIPOPTS_H__ */