Delete 'firmwares' folder

3 files changed, 0 insertions, 966 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/evk1105.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/evk1105.h
deleted file mode 100644
index edda44c..0000000
--- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/evk1105.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief AT32UC3A EVK1105 board header file.
- *
- * This file contains definitions and services related to the features of the
- * EVK1105 board rev. B.
- *
- * To use this board, define BOARD=EVK1105.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 AT32UC3A devices can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#ifndef _EVK1105_H_
-#define _EVK1105_H_
-
-#ifdef EVK1105_REV3
-#  include "evk1105_rev3.h"
-#else
-
-#include "compiler.h"
-
-#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.
-#  include "led.h"
-#endif  // __AVR32_ABI_COMPILER__
-
-
-/*! \name Oscillator Definitions
- */
-//! @{
-
-// RCOsc has no custom calibration by default. Set the following definition to
-// the appropriate value if a custom RCOsc calibration has been applied to your
-// part.
-//#define FRCOSC          AVR32_PM_RCOSC_FREQUENCY              //!< RCOsc frequency: Hz.
-
-#define FOSC32          32768                                 //!< Osc32 frequency: Hz.
-#define OSC32_STARTUP   AVR32_PM_OSCCTRL32_STARTUP_8192_RCOSC //!< Osc32 startup time: RCOsc periods.
-
-#define FOSC0           12000000                              //!< Osc0 frequency: Hz.
-#define OSC0_STARTUP    AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC  //!< Osc0 startup time: RCOsc periods.
-
-#define FOSC1           11289600                              //!< Osc1 frequency: Hz
-#define OSC1_STARTUP    AVR32_PM_OSCCTRL1_STARTUP_2048_RCOSC  //!< Osc1 startup time: RCOsc periods.
-
-
-//! @}
-
-
-/*! \name SDRAM Definitions
- */
-//! @{
-
-//! Part header file of used SDRAM(s).
-#define SDRAM_PART_HDR  "MT48LC16M16A2TG7E/mt48lc16m16a2tg7e.h"
-
-//! Data bus width to use the SDRAM(s) with (16 or 32 bits; always 16 bits on
-//! UC3).
-#define SDRAM_DBW       16
-//! @}
-
-
-/*! \name USB Definitions
- */
-//! @{
-//! Multiplexed pin used for USB_ID: AVR32_USBB_USB_ID_x_x.
-//! To be selected according to the AVR32_USBB_USB_ID_x_x_PIN and
-//! AVR32_USBB_USB_ID_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
-#define AVR32_USBB_USB_ID_0_2_PIN          21
-#define AVR32_USBB_USB_ID_0_2_FUNCTION     2
-#define USB_ID                      AVR32_USBB_USB_ID_0_2
-
-//! Multiplexed pin used for USB_VBOF: AVR32_USBB_USB_VBOF_x_x.
-//! To be selected according to the AVR32_USBB_USB_VBOF_x_x_PIN and
-//! AVR32_USBB_USB_VBOF_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
-#  define USB_VBOF                    AVR32_USBB_USB_VBOF_0_1
-
-
-//! Active level of the USB_VBOF output pin.
-#  define USB_VBOF_ACTIVE_LEVEL       LOW
-
-//! USB overcurrent detection pin.
-#  define USB_OVERCURRENT_DETECT_PIN  AVR32_PIN_PX15
-
-//! @}
-
-
-//! GPIO connection of the MAC PHY PWR_DOWN/INT signal.
-#  define MACB_INTERRUPT_PIN  AVR32_PIN_PA26
-
-
-
-//! Number of LEDs.
-#define LED_COUNT   4
-
-/*! \name GPIO Connections of LEDs
- */
-//! @{
-#  define LED0_GPIO   AVR32_PIN_PB27
-#  define LED1_GPIO   AVR32_PIN_PB28
-#  define LED2_GPIO   AVR32_PIN_PA05
-#  define LED3_GPIO   AVR32_PIN_PA06
-//! @}
-
-/*! \name Color Identifiers of LEDs to Use with LED Functions
- */
-//! @{
-#define LED_MONO0_GREEN   LED0
-#define LED_MONO1_GREEN   LED1
-#define LED_MONO2_GREEN   LED2
-#define LED_MONO3_GREEN   LED3
-//! @}
-
-/*! \name PWM Channels of LEDs
- */
-//! @{
-#define LED0_PWM      4
-#define LED1_PWM      5
-#define LED2_PWM      (-1)
-#define LED3_PWM      (-1)
-//! @}
-
-/*! \name PWM Functions of LEDs
- */
-//! @{
-/* TODO: Implement PWM functionality */
-#define LED0_PWM_FUNCTION   (-1)//AVR32_PWM_0_FUNCTION
-#define LED1_PWM_FUNCTION   (-1)//AVR32_PWM_1_FUNCTION
-#define LED2_PWM_FUNCTION   (-1)
-#define LED3_PWM_FUNCTION   (-1)
-//! @}
-
-//! External interrupt connection of touch sensor.
-#define QT1081_EIC_EXTINT_PIN       AVR32_EIC_EXTINT_1_PIN
-#define QT1081_EIC_EXTINT_FUNCTION  AVR32_EIC_EXTINT_1_FUNCTION
-#define QT1081_EIC_EXTINT_IRQ       AVR32_EIC_IRQ_1
-#define QT1081_EIC_EXTINT_INT       AVR32_EIC_INT1
-/*! \name Touch sensor low power mode select
- */
-#define QT1081_LP_MODE    AVR32_PIN_PB29
-
-/*! \name GPIO Connections of touch buttons
- */
-//! @{
-#define QT1081_TOUCH_SENSOR_0           AVR32_PIN_PB22
-#define QT1081_TOUCH_SENSOR_0_PRESSED   1
-#define QT1081_TOUCH_SENSOR_1           AVR32_PIN_PB23
-#define QT1081_TOUCH_SENSOR_1_PRESSED   1
-#define QT1081_TOUCH_SENSOR_2           AVR32_PIN_PB24
-#define QT1081_TOUCH_SENSOR_2_PRESSED   1
-#define QT1081_TOUCH_SENSOR_3           AVR32_PIN_PB25
-#define QT1081_TOUCH_SENSOR_3_PRESSED   1
-#define QT1081_TOUCH_SENSOR_4           AVR32_PIN_PB26
-#define QT1081_TOUCH_SENSOR_4_PRESSED   1
-
-#define QT1081_TOUCH_SENSOR_ENTER           QT1081_TOUCH_SENSOR_4
-#define QT1081_TOUCH_SENSOR_ENTER_PRESSED   QT1081_TOUCH_SENSOR_4_PRESSED
-#define QT1081_TOUCH_SENSOR_LEFT            QT1081_TOUCH_SENSOR_3
-#define QT1081_TOUCH_SENSOR_LEFT_PRESSED    QT1081_TOUCH_SENSOR_3_PRESSED
-#define QT1081_TOUCH_SENSOR_RIGHT           QT1081_TOUCH_SENSOR_2
-#define QT1081_TOUCH_SENSOR_RIGHT_PRESSED   QT1081_TOUCH_SENSOR_2_PRESSED
-#define QT1081_TOUCH_SENSOR_UP              QT1081_TOUCH_SENSOR_0
-#define QT1081_TOUCH_SENSOR_UP_PRESSED      QT1081_TOUCH_SENSOR_0_PRESSED
-#define QT1081_TOUCH_SENSOR_DOWN            QT1081_TOUCH_SENSOR_1
-#define QT1081_TOUCH_SENSOR_DOWN_PRESSED    QT1081_TOUCH_SENSOR_1_PRESSED
-//! @}
-
-/*! \name SPI Connections of the AT45DBX Data Flash Memory
- */
-//! @{
-#define AT45DBX_SPI                 (&AVR32_SPI0)
-#define AT45DBX_SPI_NPCS            0
-#define AT45DBX_SPI_SCK_PIN         AVR32_SPI0_SCK_0_0_PIN
-#define AT45DBX_SPI_SCK_FUNCTION    AVR32_SPI0_SCK_0_0_FUNCTION
-#define AT45DBX_SPI_MISO_PIN        AVR32_SPI0_MISO_0_0_PIN
-#define AT45DBX_SPI_MISO_FUNCTION   AVR32_SPI0_MISO_0_0_FUNCTION
-#define AT45DBX_SPI_MOSI_PIN        AVR32_SPI0_MOSI_0_0_PIN
-#define AT45DBX_SPI_MOSI_FUNCTION   AVR32_SPI0_MOSI_0_0_FUNCTION
-#define AT45DBX_SPI_NPCS0_PIN       AVR32_SPI0_NPCS_0_0_PIN
-#define AT45DBX_SPI_NPCS0_FUNCTION  AVR32_SPI0_NPCS_0_0_FUNCTION
-//! @}
-
-/*! \name GPIO and SPI Connections of the SD/MMC Connector
- */
-//! @{
-#define SD_MMC_CARD_DETECT_PIN      AVR32_PIN_PA02
-#define SD_MMC_WRITE_PROTECT_PIN    AVR32_PIN_PA18
-#define SD_MMC_SPI                  (&AVR32_SPI0)
-#define SD_MMC_SPI_NPCS             1
-#define SD_MMC_SPI_SCK_PIN          AVR32_SPI0_SCK_0_0_PIN
-#define SD_MMC_SPI_SCK_FUNCTION     AVR32_SPI0_SCK_0_0_FUNCTION
-#define SD_MMC_SPI_MISO_PIN         AVR32_SPI0_MISO_0_0_PIN
-#define SD_MMC_SPI_MISO_FUNCTION    AVR32_SPI0_MISO_0_0_FUNCTION
-#define SD_MMC_SPI_MOSI_PIN         AVR32_SPI0_MOSI_0_0_PIN
-#define SD_MMC_SPI_MOSI_FUNCTION    AVR32_SPI0_MOSI_0_0_FUNCTION
-#define SD_MMC_SPI_NPCS_PIN         AVR32_SPI0_NPCS_1_0_PIN
-#define SD_MMC_SPI_NPCS_FUNCTION    AVR32_SPI0_NPCS_1_0_FUNCTION
-//! @}
-
-
-/*! \name TWI expansion
- */
-//! @{
-#define EXPANSION_TWI                   (&AVR32_TWI)
-#define EXPANSION_RESET                 AVR32_PIN_PX16
-#define EXPANSION_TWI_SCL_PIN           AVR32_TWI_SCL_0_0_PIN
-#define EXPANSION_TWI_SCL_FUNCTION      AVR32_TWI_SCL_0_0_FUNCTION
-#define EXPANSION_TWI_SDA_PIN           AVR32_TWI_SDA_0_0_PIN
-#define EXPANSION_TWI_SDA_FUNCTION      AVR32_TWI_SDA_0_0_FUNCTION
-//! @}
-
-/*! \name Wireless expansion
- */
-
-#define WEXPANSION_EXTINT_PIN           AVR32_EIC_EXTINT_8_PIN
-#define WEXPANSION_EXTINT_FUNCTION      AVR32_EIC_EXTINT_8_FUNCTION
-#define WEXPANSION_GPIO1                AVR32_PIN_PB30
-#define WEXPANSION_GPIO2                AVR32_PIN_PB31
-
-#define WEXPANSION_SPI                  (&AVR32_SPI0)
-#define WEXPANSION_SPI_NPCS             2
-#define WEXPANSION_SPI_SCK_PIN          AVR32_SPI0_SCK_0_0_PIN
-#define WEXPANSION_SPI_SCK_FUNCTION     AVR32_SPI0_SCK_0_0_FUNCTION
-#define WEXPANSION_SPI_MISO_PIN         AVR32_SPI0_MISO_0_0_PIN
-#define WEXPANSION_SPI_MISO_FUNCTION    AVR32_SPI0_MISO_0_0_FUNCTION
-#define WEXPANSION_SPI_MOSI_PIN         AVR32_SPI0_MOSI_0_0_PIN
-#define WEXPANSION_SPI_MOSI_FUNCTION    AVR32_SPI0_MOSI_0_0_FUNCTION
-#define WEXPANSION_SPI_NPCS_PIN         AVR32_SPI0_NPCS_2_0_PIN
-#define WEXPANSION_SPI_NPCS_FUNCTION    AVR32_SPI0_NPCS_2_0_FUNCTION
-
-//! @}
-
-/*! \name ET024006DHU TFT display
- */
-//! @{
-
-#define ET024006DHU_TE_PIN              AVR32_PIN_PX19
-#define ET024006DHU_RESET_PIN           AVR32_PIN_PX22
-#define ET024006DHU_BL_PIN              AVR32_PWM_6_PIN
-#define ET024006DHU_BL_FUNCTION         AVR32_PWM_6_FUNCTION
-#define ET024006DHU_DNC_PIN             AVR32_EBI_ADDR_21_1_PIN
-#define ET024006DHU_DNC_FUNCTION        AVR32_EBI_ADDR_21_1_FUNCTION
-#define ET024006DHU_EBI_NCS_PIN         AVR32_EBI_NCS_0_1_PIN
-#define ET024006DHU_EBI_NCS_FUNCTION    AVR32_EBI_NCS_0_1_FUNCTION
-
-//! @}
-/*! \name Optional SPI connection to the TFT
- */
-//! @{
-
-#define ET024006DHU_SPI                  (&AVR32_SPI0)
-#define ET024006DHU_SPI_NPCS             3
-#define ET024006DHU_SPI_SCK_PIN          AVR32_SPI0_SCK_0_0_PIN
-#define ET024006DHU_SPI_SCK_FUNCTION     AVR32_SPI0_SCK_0_0_FUNCTION
-#define ET024006DHU_SPI_MISO_PIN         AVR32_SPI0_MISO_0_0_PIN
-#define ET024006DHU_SPI_MISO_FUNCTION    AVR32_SPI0_MISO_0_0_FUNCTION
-#define ET024006DHU_SPI_MOSI_PIN         AVR32_SPI0_MOSI_0_0_PIN
-#define ET024006DHU_SPI_MOSI_FUNCTION    AVR32_SPI0_MOSI_0_0_FUNCTION
-#define ET024006DHU_SPI_NPCS_PIN         AVR32_SPI1_NPCS_3_0_PIN
-#define ET024006DHU_SPI_NPCS_FUNCTION    AVR32_SPI1_NPCS_3_0_FUNCTION
-
-//! @}
-
-
-/*! \name Audio amplifier connection to the DAC
- */
-//! @{
-
-#define TPA6130_ABDAC             (&AVR32_ABDAC)
-
-#define TPA6130_DATA0_PIN         AVR32_ABDAC_DATA_0_1_PIN
-#define TPA6130_DATA0_FUNCTION    AVR32_ABDAC_DATA_0_1_FUNCTION
-#define TPA6130_DATAN0_PIN        AVR32_ABDAC_DATAN_0_1_PIN
-#define TPA6130_DATAN0_FUNCTION   AVR32_ABDAC_DATAN_0_1_FUNCTION
-#define TPA6130_DATA1_PIN         AVR32_ABDAC_DATA_1_1_PIN
-#define TPA6130_DATA1_FUNCTION    AVR32_ABDAC_DATA_1_1_FUNCTION
-#define TPA6130_DATAN1_PIN        AVR32_ABDAC_DATAN_1_1_PIN
-#define TPA6130_DATAN1_FUNCTION   AVR32_ABDAC_DATAN_1_1_FUNCTION
-
-#define TPA6130_ABDAC_PDCA_PID       AVR32_PDCA_PID_ABDAC_TX
-#define TPA6130_ABDAC_PDCA_CHANNEL   0
-#define TPA6130_ABDAC_PDCA_IRQ       AVR32_PDCA_IRQ_0
-#define TPA6130_ABDAC_PDCA_INT_LEVEL AVR32_INTC_INT3
-
-#define TPA6130_TWI                  (&AVR32_TWI)
-#define TPA6130_TWI_SCL_PIN          AVR32_TWI_SCL_0_0_PIN
-#define TPA6130_TWI_SCL_FUNCTION     AVR32_TWI_SCL_0_0_FUNCTION
-#define TPA6130_TWI_SDA_PIN          AVR32_TWI_SDA_0_0_PIN
-#define TPA6130_TWI_SDA_FUNCTION     AVR32_TWI_SDA_0_0_FUNCTION
-
-//! }@
-/*! \name TI TLV320AIC23B sound chip
- */
-//! @{
-#define TLV320_SSC                           (&AVR32_SSC)
-#define TLV320_SSC_TX_CLOCK_PIN              AVR32_SSC_TX_CLOCK_0_PIN
-#define TLV320_SSC_TX_CLOCK_FUNCTION         AVR32_SSC_TX_CLOCK_0_FUNCTION
-#define TLV320_SSC_TX_DATA_PIN               AVR32_SSC_TX_DATA_0_PIN
-#define TLV320_SSC_TX_DATA_FUNCTION          AVR32_SSC_TX_DATA_0_FUNCTION
-#define TLV320_SSC_TX_FRAME_SYNC_PIN         AVR32_SSC_TX_FRAME_SYNC_0_PIN
-#define TLV320_SSC_TX_FRAME_SYNC_FUNCTION    AVR32_SSC_TX_FRAME_SYNC_0_FUNCTION
-
-#define TLV320_TWI                   (&AVR32_TWI)
-#define TLV320_TWI_SCL_PIN           AVR32_TWI_SCL_0_0_PIN
-#define TLV320_TWI_SCL_FUNCTION      AVR32_TWI_SCL_0_0_FUNCTION
-#define TLV320_TWI_SDA_PIN           AVR32_TWI_SDA_0_0_PIN
-#define TLV320_TWI_SDA_FUNCTION      AVR32_TWI_SDA_0_0_FUNCTION
-
-#define TLV320_PM_GCLK_PIN         AVR32_PM_GCLK_0_0_PIN
-#define TLV320_PM_GCLK_FUNCTION    AVR32_PM_GCLK_0_0_FUNCTION
-//! @}
-
-////! \name SPI: Apple Authentication Chip Hardware Connections
-////! @{
-#define IPOD_AUTH_CHIP_SPI                  (&AVR32_SPI0)
-#define IPOD_AUTH_CHIP_SPI_IRQ              AVR32_SPI0_IRQ
-#define IPOD_AUTH_CHIP_SPI_NPCS             2
-#define IPOD_AUTH_CHIP_SPI_SCK_PIN          AVR32_SPI0_SCK_0_0_PIN
-#define IPOD_AUTH_CHIP_SPI_SCK_FUNCTION     AVR32_SPI0_SCK_0_0_FUNCTION
-#define IPOD_AUTH_CHIP_SPI_MISO_PIN         AVR32_SPI0_MISO_0_0_PIN
-#define IPOD_AUTH_CHIP_SPI_MISO_FUNCTION    AVR32_SPI0_MISO_0_0_FUNCTION
-#define IPOD_AUTH_CHIP_SPI_MOSI_PIN         AVR32_SPI0_MOSI_0_0_PIN
-#define IPOD_AUTH_CHIP_SPI_MOSI_FUNCTION    AVR32_SPI0_MOSI_0_0_FUNCTION
-#define IPOD_AUTH_CHIP_SPI_NPCS_PIN         AVR32_SPI0_NPCS_2_0_PIN
-#define IPOD_AUTH_CHIP_SPI_NPCS_FUNCTION    AVR32_SPI0_NPCS_2_0_FUNCTION
-#define IPOD_AUTH_CHIP_SPI_N_RESET_PIN      AVR32_PIN_PB30
-#define IPOD_AUTH_CHIP_SPI_CP_READY_PIN     AVR32_PIN_PB31
-//! }@
-
-/*! \name Connections of the iPOD Authentication Coprocessor
- */
-//! @{
-        
-#define IPOD_AUTH_CHIP_TWI                  (&AVR32_TWI)
-#define IPOD_AUTH_CHIP_TWI_SCL_PIN          AVR32_TWI_SCL_0_0_PIN
-#define IPOD_AUTH_CHIP_TWI_SCL_FUNCTION     AVR32_TWI_SCL_0_0_FUNCTION
-#define IPOD_AUTH_CHIP_TWI_SDA_PIN          AVR32_TWI_SDA_0_0_PIN
-#define IPOD_AUTH_CHIP_TWI_SDA_FUNCTION     AVR32_TWI_SDA_0_0_FUNCTION
-#define IPOD_AUTH_CHIP_TWI_N_RESET_PIN      AVR32_PIN_PX16
-
-//! @}
-
-/*! \name USART connection to the UC3B board controller
- */
-//! @{
-
-#define USART0_RXD_PIN          AVR32_USART0_RXD_0_0_PIN
-#define USART0_RXD_FUNCTION     AVR32_USART0_RXD_0_0_FUNCTION
-#define USART0_TXD_PIN          AVR32_USART0_TXD_0_0_PIN
-#define USART0_TXD_FUNCTION     AVR32_USART0_TXD_0_0_FUNCTION
-#define USART0_RTS_PIN          AVR32_USART0_RTS_0_0_PIN
-#define USART0_RTS_FUNCTION     AVR32_USART0_RTS_0_0_FUNCTION
-#define USART0_CTS_PIN          AVR32_USART0_CTS_0_0_PIN
-#define USART0_CTS_FUNCTION     AVR32_USART0_CTS_0_0_FUNCTION
-
-//! @}
-
-#define ADC_VEXT_PIN         AVR32_ADC_AD_7_PIN
-#define ADC_VEXT_FUNCTION    AVR32_ADC_AD_7_FUNCTION
-
-/*! \name LCD Connections of the ET024006DHU display
- */
-//! @{
-#define ET024006DHU_SMC_USE_NCS           0
-#define ET024006DHU_SMC_COMPONENT_CS      "smc_et024006dhu.h"
-
-#define ET024006DHU_EBI_DATA_0    AVR32_EBI_DATA_0
-#define ET024006DHU_EBI_DATA_1    AVR32_EBI_DATA_1
-#define ET024006DHU_EBI_DATA_2    AVR32_EBI_DATA_2
-#define ET024006DHU_EBI_DATA_3    AVR32_EBI_DATA_3
-#define ET024006DHU_EBI_DATA_4    AVR32_EBI_DATA_4
-#define ET024006DHU_EBI_DATA_5    AVR32_EBI_DATA_5
-#define ET024006DHU_EBI_DATA_6    AVR32_EBI_DATA_6
-#define ET024006DHU_EBI_DATA_7    AVR32_EBI_DATA_7
-#define ET024006DHU_EBI_DATA_8    AVR32_EBI_DATA_8
-#define ET024006DHU_EBI_DATA_9    AVR32_EBI_DATA_9
-#define ET024006DHU_EBI_DATA_10   AVR32_EBI_DATA_10
-#define ET024006DHU_EBI_DATA_11   AVR32_EBI_DATA_11
-#define ET024006DHU_EBI_DATA_12   AVR32_EBI_DATA_12
-#define ET024006DHU_EBI_DATA_13   AVR32_EBI_DATA_13
-#define ET024006DHU_EBI_DATA_14   AVR32_EBI_DATA_14
-#define ET024006DHU_EBI_DATA_15   AVR32_EBI_DATA_15
-
-#define ET024006DHU_EBI_ADDR_21   AVR32_EBI_ADDR_21_1
-
-#define ET024006DHU_EBI_NWE       AVR32_EBI_NWE0_0
-#define ET024006DHU_EBI_NRD       AVR32_EBI_NRD_0
-#define ET024006DHU_EBI_NCS       AVR32_EBI_NCS_0_1
-//! @}
-
-
-#endif  // !EVK1105_REVA
-
-#endif  // _EVK1105_H_
diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.c b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.c
deleted file mode 100644
index 561652a..0000000
--- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief AT32UC3A EVK1105 board LEDs support package.
- *
- * This file contains definitions and services related to the LED features of
- * the EVK1105 board.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 AT32UC3A devices can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#include <avr32/io.h>
-#include "preprocessor.h"
-#include "compiler.h"
-#include "evk1105.h"
-#include "led.h"
-
-
-//! Structure describing LED hardware connections.
-typedef const struct
-{
-  struct
-  {
-    U32 PORT;     //!< LED GPIO port.
-    U32 PIN_MASK; //!< Bit-mask of LED pin in GPIO port.
-  } GPIO; //!< LED GPIO descriptor.
-  struct
-  {
-    S32 CHANNEL;  //!< LED PWM channel (< 0 if N/A).
-    S32 FUNCTION; //!< LED pin PWM function (< 0 if N/A).
-  } PWM;  //!< LED PWM descriptor.
-} tLED_DESCRIPTOR;
-
-
-//! Hardware descriptors of all LEDs.
-static tLED_DESCRIPTOR LED_DESCRIPTOR[LED_COUNT] =
-{
-#define INSERT_LED_DESCRIPTOR(LED_NO, unused)                 \
-  {                                                           \
-    {LED##LED_NO##_GPIO / 32, 1 << (LED##LED_NO##_GPIO % 32)},\
-    {LED##LED_NO##_PWM,       LED##LED_NO##_PWM_FUNCTION    } \
-  },
-  MREPEAT(LED_COUNT, INSERT_LED_DESCRIPTOR, ~)
-#undef INSERT_LED_DESCRIPTOR
-};
-
-
-//! Saved state of all LEDs.
-static volatile U32 LED_State = (1 << LED_COUNT) - 1;
-
-
-U32 LED_Read_Display(void)
-{
-  return LED_State;
-}
-
-
-void LED_Display(U32 leds)
-{
-  // Use the LED descriptors to get the connections of a given LED to the MCU.
-  tLED_DESCRIPTOR *led_descriptor;
-  volatile avr32_gpio_port_t *led_gpio_port;
-
-  // Make sure only existing LEDs are specified.
-  leds &= (1 << LED_COUNT) - 1;
-
-  // Update the saved state of all LEDs with the requested changes.
-  LED_State = leds;
-
-  // For all LEDs...
-  for (led_descriptor = &LED_DESCRIPTOR[0];
-       led_descriptor < LED_DESCRIPTOR + LED_COUNT;
-       led_descriptor++)
-  {
-    // Set the LED to the requested state.
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    if (leds & 1)
-    {
-      led_gpio_port->ovrc  = led_descriptor->GPIO.PIN_MASK;
-    }
-    else
-    {
-      led_gpio_port->ovrs  = led_descriptor->GPIO.PIN_MASK;
-    }
-    led_gpio_port->oders = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->gpers = led_descriptor->GPIO.PIN_MASK;
-    leds >>= 1;
-  }
-}
-
-
-U32 LED_Read_Display_Mask(U32 mask)
-{
-  return Rd_bits(LED_State, mask);
-}
-
-
-void LED_Display_Mask(U32 mask, U32 leds)
-{
-  // Use the LED descriptors to get the connections of a given LED to the MCU.
-  tLED_DESCRIPTOR *led_descriptor = &LED_DESCRIPTOR[0] - 1;
-  volatile avr32_gpio_port_t *led_gpio_port;
-  U8 led_shift;
-
-  // Make sure only existing LEDs are specified.
-  mask &= (1 << LED_COUNT) - 1;
-
-  // Update the saved state of all LEDs with the requested changes.
-  Wr_bits(LED_State, mask, leds);
-
-  // While there are specified LEDs left to manage...
-  while (mask)
-  {
-    // Select the next specified LED and set it to the requested state.
-    led_shift = 1 + ctz(mask);
-    led_descriptor += led_shift;
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    leds >>= led_shift - 1;
-    if (leds & 1)
-    {
-      led_gpio_port->ovrc  = led_descriptor->GPIO.PIN_MASK;
-    }
-    else
-    {
-      led_gpio_port->ovrs  = led_descriptor->GPIO.PIN_MASK;
-    }
-    led_gpio_port->oders = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->gpers = led_descriptor->GPIO.PIN_MASK;
-    leds >>= 1;
-    mask >>= led_shift;
-  }
-}
-
-
-Bool LED_Test(U32 leds)
-{
-  return Tst_bits(LED_State, leds);
-}
-
-
-void LED_Off(U32 leds)
-{
-  // Use the LED descriptors to get the connections of a given LED to the MCU.
-  tLED_DESCRIPTOR *led_descriptor = &LED_DESCRIPTOR[0] - 1;
-  volatile avr32_gpio_port_t *led_gpio_port;
-  U8 led_shift;
-
-  // Make sure only existing LEDs are specified.
-  leds &= (1 << LED_COUNT) - 1;
-
-  // Update the saved state of all LEDs with the requested changes.
-  Clr_bits(LED_State, leds);
-
-  // While there are specified LEDs left to manage...
-  while (leds)
-  {
-    // Select the next specified LED and turn it off.
-    led_shift = 1 + ctz(leds);
-    led_descriptor += led_shift;
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    led_gpio_port->ovrs  = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->oders = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->gpers = led_descriptor->GPIO.PIN_MASK;
-    leds >>= led_shift;
-  }
-}
-
-
-void LED_On(U32 leds)
-{
-  // Use the LED descriptors to get the connections of a given LED to the MCU.
-  tLED_DESCRIPTOR *led_descriptor = &LED_DESCRIPTOR[0] - 1;
-  volatile avr32_gpio_port_t *led_gpio_port;
-  U8 led_shift;
-
-  // Make sure only existing LEDs are specified.
-  leds &= (1 << LED_COUNT) - 1;
-
-  // Update the saved state of all LEDs with the requested changes.
-  Set_bits(LED_State, leds);
-
-  // While there are specified LEDs left to manage...
-  while (leds)
-  {
-    // Select the next specified LED and turn it on.
-    led_shift = 1 + ctz(leds);
-    led_descriptor += led_shift;
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    led_gpio_port->ovrc  = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->oders = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->gpers = led_descriptor->GPIO.PIN_MASK;
-    leds >>= led_shift;
-  }
-}
-
-
-void LED_Toggle(U32 leds)
-{
-  // Use the LED descriptors to get the connections of a given LED to the MCU.
-  tLED_DESCRIPTOR *led_descriptor = &LED_DESCRIPTOR[0] - 1;
-  volatile avr32_gpio_port_t *led_gpio_port;
-  U8 led_shift;
-
-  // Make sure only existing LEDs are specified.
-  leds &= (1 << LED_COUNT) - 1;
-
-  // Update the saved state of all LEDs with the requested changes.
-  Tgl_bits(LED_State, leds);
-
-  // While there are specified LEDs left to manage...
-  while (leds)
-  {
-    // Select the next specified LED and toggle it.
-    led_shift = 1 + ctz(leds);
-    led_descriptor += led_shift;
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    led_gpio_port->ovrt  = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->oders = led_descriptor->GPIO.PIN_MASK;
-    led_gpio_port->gpers = led_descriptor->GPIO.PIN_MASK;
-    leds >>= led_shift;
-  }
-}
-
-
-U32 LED_Read_Display_Field(U32 field)
-{
-  return Rd_bitfield(LED_State, field);
-}
-
-
-void LED_Display_Field(U32 field, U32 leds)
-{
-  // Move the bit-field to the appropriate position for the bit-mask.
-  LED_Display_Mask(field, leds << ctz(field));
-}
-
-
-U8 LED_Get_Intensity(U32 led)
-{
-  tLED_DESCRIPTOR *led_descriptor;
-
-  // Check that the argument value is valid.
-  led = ctz(led);
-  led_descriptor = &LED_DESCRIPTOR[led];
-  if (led >= LED_COUNT || led_descriptor->PWM.CHANNEL < 0) return 0;
-
-  // Return the duty cycle value if the LED PWM channel is enabled, else 0.
-  return (AVR32_PWM.sr & (1 << led_descriptor->PWM.CHANNEL)) ?
-           AVR32_PWM.channel[led_descriptor->PWM.CHANNEL].cdty : 0;
-}
-
-
-void LED_Set_Intensity(U32 leds, U8 intensity)
-{
-  tLED_DESCRIPTOR *led_descriptor = &LED_DESCRIPTOR[0] - 1;
-  volatile avr32_pwm_channel_t *led_pwm_channel;
-  volatile avr32_gpio_port_t *led_gpio_port;
-  U8 led_shift;
-
-  // For each specified LED...
-  for (leds &= (1 << LED_COUNT) - 1; leds; leds >>= led_shift)
-  {
-    // Select the next specified LED and check that it has a PWM channel.
-    led_shift = 1 + ctz(leds);
-    led_descriptor += led_shift;
-    if (led_descriptor->PWM.CHANNEL < 0) continue;
-
-    // Initialize or update the LED PWM channel.
-    led_pwm_channel = &AVR32_PWM.channel[led_descriptor->PWM.CHANNEL];
-    if (!(AVR32_PWM.sr & (1 << led_descriptor->PWM.CHANNEL)))
-    {
-      led_pwm_channel->cmr = (AVR32_PWM_CPRE_MCK << AVR32_PWM_CPRE_OFFSET) &
-                             ~(AVR32_PWM_CALG_MASK |
-                               AVR32_PWM_CPOL_MASK |
-                               AVR32_PWM_CPD_MASK);
-      led_pwm_channel->cprd = 0x000000FF;
-      led_pwm_channel->cdty = intensity;
-      AVR32_PWM.ena = 1 << led_descriptor->PWM.CHANNEL;
-    }
-    else
-    {
-      AVR32_PWM.isr;
-      while (!(AVR32_PWM.isr & (1 << led_descriptor->PWM.CHANNEL)));
-      led_pwm_channel->cupd = intensity;
-    }
-
-    // Switch the LED pin to its PWM function.
-    led_gpio_port = &AVR32_GPIO.port[led_descriptor->GPIO.PORT];
-    if (led_descriptor->PWM.FUNCTION & 0x1)
-    {
-      led_gpio_port->pmr0s = led_descriptor->GPIO.PIN_MASK;
-    }
-    else
-    {
-      led_gpio_port->pmr0c = led_descriptor->GPIO.PIN_MASK;
-    }
-    if (led_descriptor->PWM.FUNCTION & 0x2)
-    {
-      led_gpio_port->pmr1s = led_descriptor->GPIO.PIN_MASK;
-    }
-    else
-    {
-      led_gpio_port->pmr1c = led_descriptor->GPIO.PIN_MASK;
-    }
-    led_gpio_port->gperc = led_descriptor->GPIO.PIN_MASK;
-  }
-}
diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h
deleted file mode 100644
index 7766b6a..0000000
--- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief AT32UC3A EVK1105 board LEDs support package.
- *
- * This file contains definitions and services related to the LED features of
- * the EVK1105 board.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 AT32UC3A devices can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#ifndef _LED_H_
-#define _LED_H_
-
-#include "compiler.h"
-
-
-/*! \name Identifiers of LEDs to Use with LED Functions
- */
-//! @{
-#define LED0  0x01
-#define LED1  0x02
-#define LED2  0x04
-#define LED3  0x08
-//! @}
-
-
-/*! \brief Gets the last state of all LEDs set through the LED API.
- *
- * \return State of all LEDs (1 bit per LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display(void);
-
-/*! \brief Sets the state of all LEDs.
- *
- * \param leds New state of all LEDs (1 bit per LED).
- *
- * \note The pins of all LEDs are set to GPIO output mode.
- */
-extern void LED_Display(U32 leds);
-
-/*! \brief Gets the last state of the specified LEDs set through the LED API.
- *
- * \param mask LEDs of which to get the state (1 bit per LED).
- *
- * \return State of the specified LEDs (1 bit per LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display_Mask(U32 mask);
-
-/*! \brief Sets the state of the specified LEDs.
- *
- * \param mask LEDs of which to set the state (1 bit per LED).
- *
- * \param leds New state of the specified LEDs (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Display_Mask(U32 mask, U32 leds);
-
-/*! \brief Tests the last state of the specified LEDs set through the LED API.
- *
- * \param leds LEDs of which to test the state (1 bit per LED).
- *
- * \return \c TRUE if at least one of the specified LEDs has a state on, else
- *         \c FALSE.
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern Bool LED_Test(U32 leds);
-
-/*! \brief Turns off the specified LEDs.
- *
- * \param leds LEDs to turn off (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Off(U32 leds);
-
-/*! \brief Turns on the specified LEDs.
- *
- * \param leds LEDs to turn on (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_On(U32 leds);
-
-/*! \brief Toggles the specified LEDs.
- *
- * \param leds LEDs to toggle (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Toggle(U32 leds);
-
-/*! \brief Gets as a bit-field the last state of the specified LEDs set through
- *         the LED API.
- *
- * \param field LEDs of which to get the state (1 bit per LED).
- *
- * \return State of the specified LEDs (1 bit per LED, beginning with the first
- *         specified LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display_Field(U32 field);
-
-/*! \brief Sets as a bit-field the state of the specified LEDs.
- *
- * \param field LEDs of which to set the state (1 bit per LED).
- * \param leds New state of the specified LEDs (1 bit per LED, beginning with
- *             the first specified LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Display_Field(U32 field, U32 leds);
-
-/*! \brief Gets the intensity of the specified LED.
- *
- * \param led LED of which to get the intensity (1 bit per LED; only the least
- *            significant set bit is used).
- *
- * \return Intensity of the specified LED (0x00 to 0xFF).
- *
- * \warning The PWM channel of the specified LED is supposed to be used only by
- *          this module.
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U8 LED_Get_Intensity(U32 led);
-
-/*! \brief Sets the intensity of the specified LEDs.
- *
- * \param leds LEDs of which to set the intensity (1 bit per LED).
- * \param intensity New intensity of the specified LEDs (0x00 to 0xFF).
- *
- * \warning The PWM channels of the specified LEDs are supposed to be used only
- *          by this module.
- *
- * \note The pins of the specified LEDs are set to PWM output mode.
- */
-extern void LED_Set_Intensity(U32 leds, U8 intensity);
-
-
-#endif  // _LED_H_