Merge branch 'usbcdc-improved' into ide-1.5.x

3 files changed, 25 insertions, 40 deletions

diff --git a/cores/arduino/CDC.cpp b/cores/arduino/CDC.cpp
index aa1275d..9999ca8 100644
--- a/cores/arduino/CDC.cpp
+++ b/cores/arduino/CDC.cpp
@@ -114,7 +114,6 @@ bool WEAK CDC_Setup(Setup& setup)
 }
 
 
-int _serialPeek = -1;
 void Serial_::begin(unsigned long /* baud_count */)
 {
 }
@@ -127,51 +126,29 @@ void Serial_::end(void)
 {
 }
 
-void Serial_::accept(void) 
-{
-	int i = (unsigned int)(_rx_buffer_head+1) % SERIAL_BUFFER_SIZE;
-	
-	// if we should be storing the received character into the location
-	// just before the tail (meaning that the head would advance to the
-	// current location of the tail), we're about to overflow the buffer
-	// and so we don't write the character or advance the head.
-
-	// while we have room to store a byte
-	while (i != _rx_buffer_tail) {
-		int c = USB_Recv(CDC_RX);
-		if (c == -1)
-			break;	// no more data
-		_rx_buffer[_rx_buffer_head] = c;
-		_rx_buffer_head = i;
-
-		i = (unsigned int)(_rx_buffer_head+1) % SERIAL_BUFFER_SIZE;
-	}
-}
-
 int Serial_::available(void)
 {
-	return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer_head - _rx_buffer_tail) % SERIAL_BUFFER_SIZE;
+	if (peek_buffer >= 0) {
+		return 1;
+	}
+	return USB_Available(CDC_RX);
 }
 
 int Serial_::peek(void)
 {
-	if (_rx_buffer_head == _rx_buffer_tail) {
-		return -1;
-	} else {
-		return _rx_buffer[_rx_buffer_tail];
-	}
+	if (peek_buffer < 0)
+		peek_buffer = USB_Recv(CDC_RX);
+	return peek_buffer;
 }
 
 int Serial_::read(void)
 {
-	// if the head isn't ahead of the tail, we don't have any characters
-	if (_rx_buffer_head == _rx_buffer_tail) {
-		return -1;
-	} else {
-		unsigned char c = _rx_buffer[_rx_buffer_tail];
-		_rx_buffer_tail = (unsigned int)(_rx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
+	if (peek_buffer >= 0) {
+		int c = peek_buffer;
+		peek_buffer = -1;
 		return c;
-	}	
+	}
+	return USB_Recv(CDC_RX);
 }
 
 void Serial_::flush(void)
@@ -181,6 +158,11 @@ void Serial_::flush(void)
 
 size_t Serial_::write(uint8_t c)
 {
+	return write(&c, 1);
+}
+
+size_t Serial_::write(const uint8_t *buffer, size_t size)
+{
 	/* only try to send bytes if the high-level CDC connection itself 
 	 is open (not just the pipe) - the OS should set lineState when the port
 	 is opened and clear lineState when the port is closed.
@@ -191,7 +173,7 @@ size_t Serial_::write(uint8_t c)
 	// open connection isn't broken cleanly (cable is yanked out, host dies
 	// or locks up, or host virtual serial port hangs)
 	if (_usbLineInfo.lineState > 0)	{
-		int r = USB_Send(CDC_TX,&c,1);
+		int r = USB_Send(CDC_TX,buffer,size);
 		if (r > 0) {
 			return r;
 		} else {
diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h
index 5a33002..c637fda 100644
--- a/cores/arduino/USBAPI.h
+++ b/cores/arduino/USBAPI.h
@@ -35,17 +35,19 @@ struct ring_buffer;
 
 class Serial_ : public Stream
 {
+private:
+	int peek_buffer;
 public:
 	void begin(unsigned long);
 	void begin(unsigned long, uint8_t);
 	void end(void);
 
 	virtual int available(void);
-	virtual void accept(void);
 	virtual int peek(void);
 	virtual int read(void);
 	virtual void flush(void);
 	virtual size_t write(uint8_t);
+	virtual size_t write(const uint8_t*, size_t);
 	using Print::write; // pull in write(str) and write(buf, size) from Print
 	operator bool();
 
diff --git a/cores/arduino/USBCore.cpp b/cores/arduino/USBCore.cpp
index 9eb7b33..39a9530 100644
--- a/cores/arduino/USBCore.cpp
+++ b/cores/arduino/USBCore.cpp
@@ -289,9 +289,12 @@ int USB_Send(u8 ep, const void* d, int len)
 
 		if (n > len)
 			n = len;
-		len -= n;
 		{
 			LockEP lock(ep);
+			// Frame may have been released by the SOF interrupt handler
+			if (!ReadWriteAllowed())
+				continue;
+			len -= n;
 			if (ep & TRANSFER_ZERO)
 			{
 				while (n--)
@@ -627,8 +630,6 @@ ISR(USB_GEN_vect)
 	{
 #ifdef CDC_ENABLED
 		USB_Flush(CDC_TX);				// Send a tx frame if found
-		if (USB_Available(CDC_RX))	// Handle received bytes (if any)
-			Serial.accept();
 #endif
 		
 		// check whether the one-shot period has elapsed.  if so, turn off the LED