Moving things around.

1 files changed, 0 insertions, 243 deletions

diff --git a/cores/arduino/Makefile b/cores/arduino/Makefile
deleted file mode 100755
index 0882f67..0000000
--- a/cores/arduino/Makefile
+++ /dev/null
@@ -1,243 +0,0 @@
-# Arduino Makefile
-# Arduino adaptation by mellis, eighthave, oli.keller
-#
-# This makefile allows you to build sketches from the command line
-# without the Arduino environment (or Java).
-#
-# Detailed instructions for using the makefile:
-#
-#  1. Copy this file into the folder with your sketch. There should be a
-#     file with the same name as the folder and with the extension .pde
-#     (e.g. foo.pde in the foo/ folder).
-#
-#  2. Modify the line containg "INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under Mac OS X, this
-#     might be /Applications/arduino-0012).
-#
-#  3. Modify the line containing "PORT" to refer to the filename
-#     representing the USB or serial connection to your Arduino board
-#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
-#
-#  4. Set the line containing "MCU" to match your board's processor. 
-#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
-#     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
-#     change F_CPU to 8000000.
-#
-#  5. At the command line, change to the directory containing your
-#     program's file and the makefile.
-#
-#  6. Type "make" and press enter to compile/verify your program.
-#
-#  7. Type "make upload", reset your Arduino board, and press enter to
-#     upload your program to the Arduino board.
-#
-# $Id$
-
-TARGET = $(notdir $(CURDIR))
-INSTALL_DIR = ../../..
-PORT = /dev/tty.usb*
-UPLOAD_RATE = 19200
-AVRDUDE_PROGRAMMER = stk500v1
-MCU = atmega168
-F_CPU = 16000000
-
-############################################################################
-# Below here nothing should be changed...
-
-ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino
-AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin
-SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
-$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
-$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_shift.c \
-$(ARDUINO)/WInterrupts.c
-CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \
-$(ARDUINO)/Print.cpp
-FORMAT = ihex
-
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-# Place -D or -U options here
-CDEFS = -DF_CPU=$(F_CPU)
-CXXDEFS = -DF_CPU=$(F_CPU)
-
-# Place -I options here
-CINCS = -I$(ARDUINO)
-CXXINCS = -I$(ARDUINO)
-
-# Compiler flag to set the C Standard level.
-# c89   - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99   - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-
-CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
-CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
-LDFLAGS = -lm
-
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PORT = $(PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
--p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
--b $(UPLOAD_RATE)
-
-# Program settings
-CC = $(AVR_TOOLS_PATH)/avr-gcc
-CXX = $(AVR_TOOLS_PATH)/avr-g++
-OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
-AR  = $(AVR_TOOLS_PATH)/avr-ar
-SIZE = $(AVR_TOOLS_PATH)/avr-size
-NM = $(AVR_TOOLS_PATH)/avr-nm
-AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) 
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: applet_files build sizeafter
-
-build: elf hex 
-
-applet_files: $(TARGET).pde
-	# Here is the "preprocessing".
-	# It creates a .cpp file based with the same name as the .pde file.
-	# On top of the new .cpp file comes the WProgram.h header.
-	# At the end there is a generic main() function attached.
-	# Then the .cpp file will be compiled. Errors during compile will
-	# refer to this new, automatically generated, file. 
-	# Not the original .pde file you actually edit...
-	test -d applet || mkdir applet
-	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
-	cat $(TARGET).pde >> applet/$(TARGET).cpp
-	cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp
-
-elf: applet/$(TARGET).elf
-hex: applet/$(TARGET).hex
-eep: applet/$(TARGET).eep
-lss: applet/$(TARGET).lss 
-sym: applet/$(TARGET).sym
-
-# Program the device.  
-upload: applet/$(TARGET).hex
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-
-
-	# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
-ELFSIZE = $(SIZE)  applet/$(TARGET).elf
-sizebefore:
-	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
-
-sizeafter:
-	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000 
-
-
-coff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym
-
-.elf.hex:
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
-	$(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
-	$(NM) -n $< > $@
-
-	# Link: create ELF output file from library.
-applet/$(TARGET).elf: $(TARGET).pde applet/core.a 
-	$(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
-
-applet/core.a: $(OBJ)
-	@for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
-
-
-
-# Compile: create object files from C++ source files.
-.cpp.o:
-	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
-
-# Compile: create object files from C source files.
-.c.o:
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-.c.s:
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Automatic dependencies
-%.d: %.c
-	$(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
-
-%.d: %.cpp
-	$(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
-
-
-# Target: clean project.
-clean:
-	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
-	applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
-	$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
-
-.PHONY:	all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter
-
--include $(SRC:.c=.d)
--include $(CXXSRC:.cpp=.d)