Put each HardwareSerial instance in its own .cpp file

By putting the ISRs and HardwareSerial instance for each instance in a
separate compilation unit, the compile will only consider them for
linking when the instance is actually used. The ISR is always referenced
by the compiler runtime and the Serialx_available() function is always
referenced by SerialEventRun(), but both references are weak and thus do
not cause the compilation to be included in the link by themselves.

The effect of this is that when multiple HardwareSerial ports are
available, but not all are used, buffers are only allocated and ISRs are
only included for the serial ports that are used. On the mega, this
lowers memory usage from 653 bytes to just 182 when only using the first
serial port.

On boards with just a single port, there is no change, since the code
and memory was already left out when no serial port was used at all.

This fixes #1425 and fixes #1259.

1 files changed, 13 insertions, 92 deletions

diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp
index 4318a1e..d7f1fca 100644
--- a/cores/arduino/HardwareSerial.cpp
+++ b/cores/arduino/HardwareSerial.cpp
@@ -84,105 +84,46 @@
 #error "Not all bit positions for UART3 are the same as for UART0"
 #endif
 
+// SerialEvent functions are weak, so when the user doesn't define them,
+// the linker just sets their address to 0 (which is checked below).
+// The Serialx_available is just a wrapper around Serialx.available(),
+// but we can refer to it weakly so we don't pull in the entire
+// HardwareSerial instance if the user doesn't also refer to it.
 #if defined(HAVE_HWSERIAL0)
   void serialEvent() __attribute__((weak));
-  void serialEvent() {}
-#if defined(USART_RX_vect)
-  ISR(USART_RX_vect)
-#elif defined(USART0_RX_vect)
-  ISR(USART0_RX_vect)
-#elif defined(USART_RXC_vect)
-  ISR(USART_RXC_vect) // ATmega8
-#else
-  #error "Don't know what the Data Received vector is called for the first UART"
-#endif
-  {
-    Serial._rx_complete_irq();
-  }
+  bool Serial0_available() __attribute__((weak));
 #endif
 
 #if defined(HAVE_HWSERIAL1)
   void serialEvent1() __attribute__((weak));
-  void serialEvent1() {}
-  ISR(USART1_RX_vect)
-  {
-    Serial1._rx_complete_irq();
-  }
+  bool Serial1_available() __attribute__((weak));
 #endif
 
 #if defined(HAVE_HWSERIAL2)
   void serialEvent2() __attribute__((weak));
-  void serialEvent2() {}
-  ISR(USART2_RX_vect)
-  {
-    Serial2._rx_complete_irq();
-  }
+  bool Serial2_available() __attribute__((weak));
 #endif
 
 #if defined(HAVE_HWSERIAL3)
   void serialEvent3() __attribute__((weak));
-  void serialEvent3() {}
-  ISR(USART3_RX_vect)
-  {
-    Serial3._rx_complete_irq();
-  }
+  bool Serial3_available() __attribute__((weak));
 #endif
 
 void serialEventRun(void)
 {
 #if defined(HAVE_HWSERIAL0)
-  if (Serial.available()) serialEvent();
+  if (Serial0_available && serialEvent && Serial0_available()) serialEvent();
 #endif
 #if defined(HAVE_HWSERIAL1)
-  if (Serial1.available()) serialEvent1();
+  if (Serial1_available && serialEvent1 && Serial1_available()) serialEvent1();
 #endif
 #if defined(HAVE_HWSERIAL2)
-  if (Serial2.available()) serialEvent2();
+  if (Serial2_available && serialEvent2 && Serial2_available()) serialEvent2();
 #endif
 #if defined(HAVE_HWSERIAL3)
-  if (Serial3.available()) serialEvent3();
-#endif
-}
-
-
-#if defined(HAVE_HWSERIAL0)
-#if defined(UART0_UDRE_vect)
-ISR(UART0_UDRE_vect)
-#elif defined(UART_UDRE_vect)
-ISR(UART_UDRE_vect)
-#elif defined(USART0_UDRE_vect)
-ISR(USART0_UDRE_vect)
-#elif defined(USART_UDRE_vect)
-ISR(USART_UDRE_vect)
-#else
-  #error "Don't know what the Data Register Empty vector is called for the first UART"
-#endif
-{
-  Serial._tx_udr_empty_irq();
-}
+  if (Serial3_available && serialEvent2 && Serial3_available()) serialEvent3();
 #endif
-
-#if defined(HAVE_HWSERIAL1)
-ISR(USART1_UDRE_vect)
-{
-  Serial1._tx_udr_empty_irq();
 }
-#endif
-
-#if defined(HAVE_HWSERIAL2)
-ISR(USART2_UDRE_vect)
-{
-  Serial2._tx_udr_empty_irq();
-}
-#endif
-
-#if defined(HAVE_HWSERIAL3)
-ISR(USART3_UDRE_vect)
-{
-  Serial3._tx_udr_empty_irq();
-}
-#endif
-
 
 // Actual interrupt handlers //////////////////////////////////////////////////////////////
 
@@ -371,25 +312,5 @@ size_t HardwareSerial::write(uint8_t c)
   return 1;
 }
 
-// Preinstantiate Objects //////////////////////////////////////////////////////
-
-#if defined(HAVE_HWSERIAL0)
-#if defined(UBRRH) && defined(UBRRL)
-  HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
-#else
-  HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
-#endif
-#endif
-
-#if defined(HAVE_HWSERIAL1)
-  HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1);
-#endif
-#if defined(HAVE_HWSERIAL2)
-  HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2);
-#endif
-#if defined(HAVE_HWSERIAL3)
-  HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3);
-#endif
 
 #endif // whole file
-