Allow the READ PARAMETER command to return our version number.

(significant size impact: 14 bytes!)

Initialized "address" to eliminate compiler warning (4 bytes!)

Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)

Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328.  The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted.  Which should be less of a problem
now that the source is buildable without installing crosspack.
(cherry picked from commit 7b1ee0f1b0192143fffbbed66dc046b6568f4386)

1 files changed, 0 insertions, 571 deletions

diff --git a/bootloaders/optiboot/optiboot_pro_16MHz.lst b/bootloaders/optiboot/optiboot_pro_16MHz.lst
deleted file mode 100644
index 2c6bea1..0000000
--- a/bootloaders/optiboot/optiboot_pro_16MHz.lst
+++ /dev/null
@@ -1,571 +0,0 @@
-
-optiboot_pro_16MHz.elf:     file format elf32-avr
-
-Sections:
-Idx Name          Size      VMA       LMA       File off  Algn
-  0 .text         000001e2  00003e00  00003e00  00000054  2**1
-                  CONTENTS, ALLOC, LOAD, READONLY, CODE
-  1 .version      00000002  00003ffe  00003ffe  00000236  2**0
-                  CONTENTS, READONLY
-  2 .debug_aranges 00000028  00000000  00000000  00000238  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  3 .debug_pubnames 0000005f  00000000  00000000  00000260  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  4 .debug_info   0000028e  00000000  00000000  000002bf  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  5 .debug_abbrev 00000171  00000000  00000000  0000054d  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  6 .debug_line   0000045e  00000000  00000000  000006be  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  7 .debug_frame  00000080  00000000  00000000  00000b1c  2**2
-                  CONTENTS, READONLY, DEBUGGING
-  8 .debug_str    00000149  00000000  00000000  00000b9c  2**0
-                  CONTENTS, READONLY, DEBUGGING
-  9 .debug_loc    0000027e  00000000  00000000  00000ce5  2**0
-                  CONTENTS, READONLY, DEBUGGING
- 10 .debug_ranges 00000060  00000000  00000000  00000f63  2**0
-                  CONTENTS, READONLY, DEBUGGING
-
-Disassembly of section .text:
-
-00003e00 <main>:
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
-    3e00:	11 24       	eor	r1, r1
-#ifdef __AVR_ATmega8__
-  SP=RAMEND;  // This is done by hardware reset
-#endif
-
-  // Adaboot no-wait mod
-  ch = MCUSR;
-    3e02:	84 b7       	in	r24, 0x34	; 52
-  MCUSR = 0;
-    3e04:	14 be       	out	0x34, r1	; 52
-  if (!(ch & _BV(EXTRF))) appStart();
-    3e06:	81 ff       	sbrs	r24, 1
-    3e08:	e7 d0       	rcall	.+462    	; 0x3fd8 <appStart>
-
-#if LED_START_FLASHES > 0
-  // Set up Timer 1 for timeout counter
-  TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
-    3e0a:	85 e0       	ldi	r24, 0x05	; 5
-    3e0c:	80 93 81 00 	sts	0x0081, r24
-  UCSRA = _BV(U2X); //Double speed mode USART
-  UCSRB = _BV(RXEN) | _BV(TXEN);  // enable Rx & Tx
-  UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0);  // config USART; 8N1
-  UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
-#else
-  UCSR0A = _BV(U2X0); //Double speed mode USART0
-    3e10:	82 e0       	ldi	r24, 0x02	; 2
-    3e12:	80 93 c0 00 	sts	0x00C0, r24
-  UCSR0B = _BV(RXEN0) | _BV(TXEN0);
-    3e16:	88 e1       	ldi	r24, 0x18	; 24
-    3e18:	80 93 c1 00 	sts	0x00C1, r24
-  UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
-    3e1c:	86 e0       	ldi	r24, 0x06	; 6
-    3e1e:	80 93 c2 00 	sts	0x00C2, r24
-  UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
-    3e22:	80 e1       	ldi	r24, 0x10	; 16
-    3e24:	80 93 c4 00 	sts	0x00C4, r24
-#endif
-#endif
-
-  // Set up watchdog to trigger after 500ms
-  watchdogConfig(WATCHDOG_1S);
-    3e28:	8e e0       	ldi	r24, 0x0E	; 14
-    3e2a:	c0 d0       	rcall	.+384    	; 0x3fac <watchdogConfig>
-
-  /* Set LED pin as output */
-  LED_DDR |= _BV(LED);
-    3e2c:	25 9a       	sbi	0x04, 5	; 4
-    3e2e:	86 e0       	ldi	r24, 0x06	; 6
-}
-
-#if LED_START_FLASHES > 0
-void flash_led(uint8_t count) {
-  do {
-    TCNT1 = -(F_CPU/(1024*16));
-    3e30:	20 e3       	ldi	r18, 0x30	; 48
-    3e32:	3c ef       	ldi	r19, 0xFC	; 252
-    TIFR1 = _BV(TOV1);
-    3e34:	91 e0       	ldi	r25, 0x01	; 1
-}
-
-#if LED_START_FLASHES > 0
-void flash_led(uint8_t count) {
-  do {
-    TCNT1 = -(F_CPU/(1024*16));
-    3e36:	30 93 85 00 	sts	0x0085, r19
-    3e3a:	20 93 84 00 	sts	0x0084, r18
-    TIFR1 = _BV(TOV1);
-    3e3e:	96 bb       	out	0x16, r25	; 22
-    while(!(TIFR1 & _BV(TOV1)));
-    3e40:	b0 9b       	sbis	0x16, 0	; 22
-    3e42:	fe cf       	rjmp	.-4      	; 0x3e40 <main+0x40>
-#ifdef __AVR_ATmega8__
-    LED_PORT ^= _BV(LED);
-#else
-    LED_PIN |= _BV(LED);
-    3e44:	1d 9a       	sbi	0x03, 5	; 3
-}
-#endif
-
-// Watchdog functions. These are only safe with interrupts turned off.
-void watchdogReset() {
-  __asm__ __volatile__ (
-    3e46:	a8 95       	wdr
-    LED_PORT ^= _BV(LED);
-#else
-    LED_PIN |= _BV(LED);
-#endif
-    watchdogReset();
-  } while (--count);
-    3e48:	81 50       	subi	r24, 0x01	; 1
-    3e4a:	a9 f7       	brne	.-22     	; 0x3e36 <main+0x36>
-    /* get character from UART */
-    ch = getch();
-
-    if(ch == STK_GET_PARAMETER) {
-      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
-      getNch(1);
-    3e4c:	99 24       	eor	r9, r9
-    3e4e:	93 94       	inc	r9
-        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
-        addrPtr += 2;
-      } while (--ch);
-
-      // Write from programming buffer
-      __boot_page_write_short((uint16_t)(void*)address);
-    3e50:	a5 e0       	ldi	r26, 0x05	; 5
-    3e52:	aa 2e       	mov	r10, r26
-      boot_spm_busy_wait();
-
-#if defined(RWWSRE)
-      // Reenable read access to flash
-      boot_rww_enable();
-    3e54:	f1 e1       	ldi	r31, 0x11	; 17
-    3e56:	bf 2e       	mov	r11, r31
-#endif
-
-  /* Forever loop */
-  for (;;) {
-    /* get character from UART */
-    ch = getch();
-    3e58:	9d d0       	rcall	.+314    	; 0x3f94 <getch>
-
-    if(ch == STK_GET_PARAMETER) {
-    3e5a:	81 34       	cpi	r24, 0x41	; 65
-    3e5c:	21 f4       	brne	.+8      	; 0x3e66 <main+0x66>
-      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
-      getNch(1);
-    3e5e:	81 e0       	ldi	r24, 0x01	; 1
-    3e60:	b3 d0       	rcall	.+358    	; 0x3fc8 <getNch>
-      putch(0x03);
-    3e62:	83 e0       	ldi	r24, 0x03	; 3
-    3e64:	1f c0       	rjmp	.+62     	; 0x3ea4 <main+0xa4>
-    }
-    else if(ch == STK_SET_DEVICE) {
-    3e66:	82 34       	cpi	r24, 0x42	; 66
-    3e68:	11 f4       	brne	.+4      	; 0x3e6e <main+0x6e>
-      // SET DEVICE is ignored
-      getNch(20);
-    3e6a:	84 e1       	ldi	r24, 0x14	; 20
-    3e6c:	03 c0       	rjmp	.+6      	; 0x3e74 <main+0x74>
-    }
-    else if(ch == STK_SET_DEVICE_EXT) {
-    3e6e:	85 34       	cpi	r24, 0x45	; 69
-    3e70:	19 f4       	brne	.+6      	; 0x3e78 <main+0x78>
-      // SET DEVICE EXT is ignored
-      getNch(5);
-    3e72:	85 e0       	ldi	r24, 0x05	; 5
-    3e74:	a9 d0       	rcall	.+338    	; 0x3fc8 <getNch>
-    3e76:	83 c0       	rjmp	.+262    	; 0x3f7e <main+0x17e>
-    }
-    else if(ch == STK_LOAD_ADDRESS) {
-    3e78:	85 35       	cpi	r24, 0x55	; 85
-    3e7a:	79 f4       	brne	.+30     	; 0x3e9a <main+0x9a>
-      // LOAD ADDRESS
-      uint16_t newAddress;
-      newAddress = getch();
-    3e7c:	8b d0       	rcall	.+278    	; 0x3f94 <getch>
-      newAddress = (newAddress & 0xff) | (getch() << 8);
-    3e7e:	e8 2e       	mov	r14, r24
-    3e80:	ff 24       	eor	r15, r15
-    3e82:	88 d0       	rcall	.+272    	; 0x3f94 <getch>
-    3e84:	08 2f       	mov	r16, r24
-    3e86:	10 e0       	ldi	r17, 0x00	; 0
-    3e88:	10 2f       	mov	r17, r16
-    3e8a:	00 27       	eor	r16, r16
-    3e8c:	0e 29       	or	r16, r14
-    3e8e:	1f 29       	or	r17, r15
-#ifdef RAMPZ
-      // Transfer top bit to RAMPZ
-      RAMPZ = (newAddress & 0x8000) ? 1 : 0;
-#endif
-      newAddress += newAddress; // Convert from word address to byte address
-    3e90:	00 0f       	add	r16, r16
-    3e92:	11 1f       	adc	r17, r17
-      address = newAddress;
-      verifySpace();
-    3e94:	91 d0       	rcall	.+290    	; 0x3fb8 <verifySpace>
-    3e96:	68 01       	movw	r12, r16
-    3e98:	72 c0       	rjmp	.+228    	; 0x3f7e <main+0x17e>
-    }
-    else if(ch == STK_UNIVERSAL) {
-    3e9a:	86 35       	cpi	r24, 0x56	; 86
-    3e9c:	29 f4       	brne	.+10     	; 0x3ea8 <main+0xa8>
-      // UNIVERSAL command is ignored
-      getNch(4);
-    3e9e:	84 e0       	ldi	r24, 0x04	; 4
-    3ea0:	93 d0       	rcall	.+294    	; 0x3fc8 <getNch>
-      putch(0x00);
-    3ea2:	80 e0       	ldi	r24, 0x00	; 0
-    3ea4:	6f d0       	rcall	.+222    	; 0x3f84 <putch>
-    3ea6:	6b c0       	rjmp	.+214    	; 0x3f7e <main+0x17e>
-    }
-    /* Write memory, length is big endian and is in bytes */
-    else if(ch == STK_PROG_PAGE) {
-    3ea8:	84 36       	cpi	r24, 0x64	; 100
-    3eaa:	09 f0       	breq	.+2      	; 0x3eae <main+0xae>
-    3eac:	42 c0       	rjmp	.+132    	; 0x3f32 <main+0x132>
-      // PROGRAM PAGE - we support flash programming only, not EEPROM
-      uint8_t *bufPtr;
-      uint16_t addrPtr;
-
-      getch();			/* getlen() */
-    3eae:	72 d0       	rcall	.+228    	; 0x3f94 <getch>
-      length = getch();
-    3eb0:	71 d0       	rcall	.+226    	; 0x3f94 <getch>
-    3eb2:	08 2f       	mov	r16, r24
-      getch();
-    3eb4:	6f d0       	rcall	.+222    	; 0x3f94 <getch>
-
-      // If we are in RWW section, immediately start page erase
-      if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-    3eb6:	80 e0       	ldi	r24, 0x00	; 0
-    3eb8:	c8 16       	cp	r12, r24
-    3eba:	88 e3       	ldi	r24, 0x38	; 56
-    3ebc:	d8 06       	cpc	r13, r24
-    3ebe:	20 f4       	brcc	.+8      	; 0x3ec8 <main+0xc8>
-    3ec0:	83 e0       	ldi	r24, 0x03	; 3
-    3ec2:	f6 01       	movw	r30, r12
-    3ec4:	87 bf       	out	0x37, r24	; 55
-    3ec6:	e8 95       	spm
-    3ec8:	c0 e0       	ldi	r28, 0x00	; 0
-    3eca:	d1 e0       	ldi	r29, 0x01	; 1
-
-      // While that is going on, read in page contents
-      bufPtr = buff;
-      do *bufPtr++ = getch();
-    3ecc:	63 d0       	rcall	.+198    	; 0x3f94 <getch>
-    3ece:	89 93       	st	Y+, r24
-      while (--length);
-    3ed0:	0c 17       	cp	r16, r28
-    3ed2:	e1 f7       	brne	.-8      	; 0x3ecc <main+0xcc>
-
-      // If we are in NRWW section, page erase has to be delayed until now.
-      // Todo: Take RAMPZ into account
-      if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-    3ed4:	f0 e0       	ldi	r31, 0x00	; 0
-    3ed6:	cf 16       	cp	r12, r31
-    3ed8:	f8 e3       	ldi	r31, 0x38	; 56
-    3eda:	df 06       	cpc	r13, r31
-    3edc:	20 f0       	brcs	.+8      	; 0x3ee6 <main+0xe6>
-    3ede:	83 e0       	ldi	r24, 0x03	; 3
-    3ee0:	f6 01       	movw	r30, r12
-    3ee2:	87 bf       	out	0x37, r24	; 55
-    3ee4:	e8 95       	spm
-
-      // Read command terminator, start reply
-      verifySpace();
-    3ee6:	68 d0       	rcall	.+208    	; 0x3fb8 <verifySpace>
-
-      // If only a partial page is to be programmed, the erase might not be complete.
-      // So check that here
-      boot_spm_busy_wait();
-    3ee8:	07 b6       	in	r0, 0x37	; 55
-    3eea:	00 fc       	sbrc	r0, 0
-    3eec:	fd cf       	rjmp	.-6      	; 0x3ee8 <main+0xe8>
-    3eee:	a6 01       	movw	r20, r12
-    3ef0:	a0 e0       	ldi	r26, 0x00	; 0
-    3ef2:	b1 e0       	ldi	r27, 0x01	; 1
-      bufPtr = buff;
-      addrPtr = (uint16_t)(void*)address;
-      ch = SPM_PAGESIZE / 2;
-      do {
-        uint16_t a;
-        a = *bufPtr++;
-    3ef4:	2c 91       	ld	r18, X
-    3ef6:	30 e0       	ldi	r19, 0x00	; 0
-        a |= (*bufPtr++) << 8;
-    3ef8:	11 96       	adiw	r26, 0x01	; 1
-    3efa:	8c 91       	ld	r24, X
-    3efc:	11 97       	sbiw	r26, 0x01	; 1
-    3efe:	90 e0       	ldi	r25, 0x00	; 0
-    3f00:	98 2f       	mov	r25, r24
-    3f02:	88 27       	eor	r24, r24
-    3f04:	82 2b       	or	r24, r18
-    3f06:	93 2b       	or	r25, r19
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
-    3f08:	12 96       	adiw	r26, 0x02	; 2
-      ch = SPM_PAGESIZE / 2;
-      do {
-        uint16_t a;
-        a = *bufPtr++;
-        a |= (*bufPtr++) << 8;
-        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
-    3f0a:	fa 01       	movw	r30, r20
-    3f0c:	0c 01       	movw	r0, r24
-    3f0e:	97 be       	out	0x37, r9	; 55
-    3f10:	e8 95       	spm
-    3f12:	11 24       	eor	r1, r1
-        addrPtr += 2;
-    3f14:	4e 5f       	subi	r20, 0xFE	; 254
-    3f16:	5f 4f       	sbci	r21, 0xFF	; 255
-      } while (--ch);
-    3f18:	f1 e0       	ldi	r31, 0x01	; 1
-    3f1a:	a0 38       	cpi	r26, 0x80	; 128
-    3f1c:	bf 07       	cpc	r27, r31
-    3f1e:	51 f7       	brne	.-44     	; 0x3ef4 <main+0xf4>
-
-      // Write from programming buffer
-      __boot_page_write_short((uint16_t)(void*)address);
-    3f20:	f6 01       	movw	r30, r12
-    3f22:	a7 be       	out	0x37, r10	; 55
-    3f24:	e8 95       	spm
-      boot_spm_busy_wait();
-    3f26:	07 b6       	in	r0, 0x37	; 55
-    3f28:	00 fc       	sbrc	r0, 0
-    3f2a:	fd cf       	rjmp	.-6      	; 0x3f26 <main+0x126>
-
-#if defined(RWWSRE)
-      // Reenable read access to flash
-      boot_rww_enable();
-    3f2c:	b7 be       	out	0x37, r11	; 55
-    3f2e:	e8 95       	spm
-    3f30:	26 c0       	rjmp	.+76     	; 0x3f7e <main+0x17e>
-#endif
-
-    }
-    /* Read memory block mode, length is big endian.  */
-    else if(ch == STK_READ_PAGE) {
-    3f32:	84 37       	cpi	r24, 0x74	; 116
-    3f34:	b1 f4       	brne	.+44     	; 0x3f62 <main+0x162>
-      // READ PAGE - we only read flash
-      getch();			/* getlen() */
-    3f36:	2e d0       	rcall	.+92     	; 0x3f94 <getch>
-      length = getch();
-    3f38:	2d d0       	rcall	.+90     	; 0x3f94 <getch>
-    3f3a:	f8 2e       	mov	r15, r24
-      getch();
-    3f3c:	2b d0       	rcall	.+86     	; 0x3f94 <getch>
-
-      verifySpace();
-    3f3e:	3c d0       	rcall	.+120    	; 0x3fb8 <verifySpace>
-    3f40:	f6 01       	movw	r30, r12
-    3f42:	ef 2c       	mov	r14, r15
-        putch(result);
-        address++;
-      }
-      while (--length);
-#else
-      do putch(pgm_read_byte_near(address++));
-    3f44:	8f 01       	movw	r16, r30
-    3f46:	0f 5f       	subi	r16, 0xFF	; 255
-    3f48:	1f 4f       	sbci	r17, 0xFF	; 255
-    3f4a:	84 91       	lpm	r24, Z+
-    3f4c:	1b d0       	rcall	.+54     	; 0x3f84 <putch>
-      while (--length);
-    3f4e:	ea 94       	dec	r14
-    3f50:	f8 01       	movw	r30, r16
-    3f52:	c1 f7       	brne	.-16     	; 0x3f44 <main+0x144>
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
-    3f54:	08 94       	sec
-    3f56:	c1 1c       	adc	r12, r1
-    3f58:	d1 1c       	adc	r13, r1
-    3f5a:	fa 94       	dec	r15
-    3f5c:	cf 0c       	add	r12, r15
-    3f5e:	d1 1c       	adc	r13, r1
-    3f60:	0e c0       	rjmp	.+28     	; 0x3f7e <main+0x17e>
-#endif
-#endif
-    }
-
-    /* Get device signature bytes  */
-    else if(ch == STK_READ_SIGN) {
-    3f62:	85 37       	cpi	r24, 0x75	; 117
-    3f64:	39 f4       	brne	.+14     	; 0x3f74 <main+0x174>
-      // READ SIGN - return what Avrdude wants to hear
-      verifySpace();
-    3f66:	28 d0       	rcall	.+80     	; 0x3fb8 <verifySpace>
-      putch(SIGNATURE_0);
-    3f68:	8e e1       	ldi	r24, 0x1E	; 30
-    3f6a:	0c d0       	rcall	.+24     	; 0x3f84 <putch>
-      putch(SIGNATURE_1);
-    3f6c:	84 e9       	ldi	r24, 0x94	; 148
-    3f6e:	0a d0       	rcall	.+20     	; 0x3f84 <putch>
-      putch(SIGNATURE_2);
-    3f70:	86 e0       	ldi	r24, 0x06	; 6
-    3f72:	98 cf       	rjmp	.-208    	; 0x3ea4 <main+0xa4>
-    }
-    else if (ch == 'Q') {
-    3f74:	81 35       	cpi	r24, 0x51	; 81
-    3f76:	11 f4       	brne	.+4      	; 0x3f7c <main+0x17c>
-      // Adaboot no-wait mod
-      watchdogConfig(WATCHDOG_16MS);
-    3f78:	88 e0       	ldi	r24, 0x08	; 8
-    3f7a:	18 d0       	rcall	.+48     	; 0x3fac <watchdogConfig>
-      verifySpace();
-    }
-    else {
-      // This covers the response to commands like STK_ENTER_PROGMODE
-      verifySpace();
-    3f7c:	1d d0       	rcall	.+58     	; 0x3fb8 <verifySpace>
-    }
-    putch(STK_OK);
-    3f7e:	80 e1       	ldi	r24, 0x10	; 16
-    3f80:	01 d0       	rcall	.+2      	; 0x3f84 <putch>
-    3f82:	6a cf       	rjmp	.-300    	; 0x3e58 <main+0x58>
-
-00003f84 <putch>:
-  }
-}
-
-void putch(char ch) {
-    3f84:	98 2f       	mov	r25, r24
-#ifndef SOFT_UART
-  while (!(UCSR0A & _BV(UDRE0)));
-    3f86:	80 91 c0 00 	lds	r24, 0x00C0
-    3f8a:	85 ff       	sbrs	r24, 5
-    3f8c:	fc cf       	rjmp	.-8      	; 0x3f86 <putch+0x2>
-  UDR0 = ch;
-    3f8e:	90 93 c6 00 	sts	0x00C6, r25
-      [uartBit] "I" (UART_TX_BIT)
-    :
-      "r25"
-  );
-#endif
-}
-    3f92:	08 95       	ret
-
-00003f94 <getch>:
-      [uartBit] "I" (UART_RX_BIT)
-    :
-      "r25"
-);
-#else
-  while(!(UCSR0A & _BV(RXC0)))
-    3f94:	80 91 c0 00 	lds	r24, 0x00C0
-    3f98:	87 ff       	sbrs	r24, 7
-    3f9a:	fc cf       	rjmp	.-8      	; 0x3f94 <getch>
-    ;
-  if (!(UCSR0A & _BV(FE0))) {
-    3f9c:	80 91 c0 00 	lds	r24, 0x00C0
-    3fa0:	84 fd       	sbrc	r24, 4
-    3fa2:	01 c0       	rjmp	.+2      	; 0x3fa6 <getch+0x12>
-}
-#endif
-
-// Watchdog functions. These are only safe with interrupts turned off.
-void watchdogReset() {
-  __asm__ __volatile__ (
-    3fa4:	a8 95       	wdr
-       * don't care that an invalid char is returned...)
-       */
-    watchdogReset();
-  }
-  
-  ch = UDR0;
-    3fa6:	80 91 c6 00 	lds	r24, 0x00C6
-  LED_PIN |= _BV(LED);
-#endif
-#endif
-
-  return ch;
-}
-    3faa:	08 95       	ret
-
-00003fac <watchdogConfig>:
-    "wdr\n"
-  );
-}
-
-void watchdogConfig(uint8_t x) {
-  WDTCSR = _BV(WDCE) | _BV(WDE);
-    3fac:	e0 e6       	ldi	r30, 0x60	; 96
-    3fae:	f0 e0       	ldi	r31, 0x00	; 0
-    3fb0:	98 e1       	ldi	r25, 0x18	; 24
-    3fb2:	90 83       	st	Z, r25
-  WDTCSR = x;
-    3fb4:	80 83       	st	Z, r24
-}
-    3fb6:	08 95       	ret
-
-00003fb8 <verifySpace>:
-  do getch(); while (--count);
-  verifySpace();
-}
-
-void verifySpace() {
-  if (getch() != CRC_EOP) {
-    3fb8:	ed df       	rcall	.-38     	; 0x3f94 <getch>
-    3fba:	80 32       	cpi	r24, 0x20	; 32
-    3fbc:	19 f0       	breq	.+6      	; 0x3fc4 <verifySpace+0xc>
-    watchdogConfig(WATCHDOG_16MS);    // shorten WD timeout
-    3fbe:	88 e0       	ldi	r24, 0x08	; 8
-    3fc0:	f5 df       	rcall	.-22     	; 0x3fac <watchdogConfig>
-    3fc2:	ff cf       	rjmp	.-2      	; 0x3fc2 <verifySpace+0xa>
-    while (1)			      // and busy-loop so that WD causes
-      ;				      //  a reset and app start.
-  }
-  putch(STK_INSYNC);
-    3fc4:	84 e1       	ldi	r24, 0x14	; 20
-}
-    3fc6:	de cf       	rjmp	.-68     	; 0x3f84 <putch>
-
-00003fc8 <getNch>:
-    ::[count] "M" (UART_B_VALUE)
-  );
-}
-#endif
-
-void getNch(uint8_t count) {
-    3fc8:	1f 93       	push	r17
-    3fca:	18 2f       	mov	r17, r24
-  do getch(); while (--count);
-    3fcc:	e3 df       	rcall	.-58     	; 0x3f94 <getch>
-    3fce:	11 50       	subi	r17, 0x01	; 1
-    3fd0:	e9 f7       	brne	.-6      	; 0x3fcc <getNch+0x4>
-  verifySpace();
-    3fd2:	f2 df       	rcall	.-28     	; 0x3fb8 <verifySpace>
-}
-    3fd4:	1f 91       	pop	r17
-    3fd6:	08 95       	ret
-
-00003fd8 <appStart>:
-  WDTCSR = _BV(WDCE) | _BV(WDE);
-  WDTCSR = x;
-}
-
-void appStart() {
-  watchdogConfig(WATCHDOG_OFF);
-    3fd8:	80 e0       	ldi	r24, 0x00	; 0
-    3fda:	e8 df       	rcall	.-48     	; 0x3fac <watchdogConfig>
-  __asm__ __volatile__ (
-    3fdc:	ee 27       	eor	r30, r30
-    3fde:	ff 27       	eor	r31, r31
-    3fe0:	09 94       	ijmp