Add a version number to the optiboot source and binary.

http://code.google.com/p/arduino/issues/detail?id=554

end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip.  (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)

Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)

Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.

Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section.  (This would
need to be done elsewhere as well to handle all bootloader programming
techniques.  Notably Arduino's boards.txt

Note that this change does not change the "code" portion of optiboot
at all.  The only diffs in the .hex files are the added version word
at the end of flash memory.

1 files changed, 303 insertions, 301 deletions

diff --git a/bootloaders/optiboot/optiboot_luminet.lst b/bootloaders/optiboot/optiboot_luminet.lst
index 737d2c5..1be7e4f 100644
--- a/bootloaders/optiboot/optiboot_luminet.lst
+++ b/bootloaders/optiboot/optiboot_luminet.lst
@@ -3,620 +3,622 @@ optiboot_luminet.elf:     file format elf32-avr
 
 Sections:
 Idx Name          Size      VMA       LMA       File off  Algn
-  0 .text         00000274  00001d00  00001d00  00000054  2**1
+  0 .version      00000002  00001efe  00001efe  000002c8  2**0
+                  CONTENTS, READONLY
+  1 .text         00000274  00000000  00000000  00000054  2**1
                   CONTENTS, ALLOC, LOAD, READONLY, CODE
-  1 .debug_aranges 00000028  00000000  00000000  000002c8  2**0
+  2 .debug_aranges 00000028  00000000  00000000  000002ca  2**0
                   CONTENTS, READONLY, DEBUGGING
-  2 .debug_pubnames 00000078  00000000  00000000  000002f0  2**0
+  3 .debug_pubnames 00000078  00000000  00000000  000002f2  2**0
                   CONTENTS, READONLY, DEBUGGING
-  3 .debug_info   000002a4  00000000  00000000  00000368  2**0
+  4 .debug_info   000002a5  00000000  00000000  0000036a  2**0
                   CONTENTS, READONLY, DEBUGGING
-  4 .debug_abbrev 000001ac  00000000  00000000  0000060c  2**0
+  5 .debug_abbrev 0000019d  00000000  00000000  0000060f  2**0
                   CONTENTS, READONLY, DEBUGGING
-  5 .debug_line   000004a9  00000000  00000000  000007b8  2**0
+  6 .debug_line   000004ac  00000000  00000000  000007ac  2**0
                   CONTENTS, READONLY, DEBUGGING
-  6 .debug_frame  000000a0  00000000  00000000  00000c64  2**2
+  7 .debug_frame  000000a0  00000000  00000000  00000c58  2**2
                   CONTENTS, READONLY, DEBUGGING
-  7 .debug_str    00000150  00000000  00000000  00000d04  2**0
+  8 .debug_str    00000150  00000000  00000000  00000cf8  2**0
                   CONTENTS, READONLY, DEBUGGING
-  8 .debug_loc    00000194  00000000  00000000  00000e54  2**0
+  9 .debug_loc    00000194  00000000  00000000  00000e48  2**0
                   CONTENTS, READONLY, DEBUGGING
-  9 .debug_ranges 00000088  00000000  00000000  00000fe8  2**0
+ 10 .debug_ranges 00000088  00000000  00000000  00000fdc  2**0
                   CONTENTS, READONLY, DEBUGGING
 
 Disassembly of section .text:
 
-00001d00 <main>:
+00000000 <main>:
 #define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
 #define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
 #endif
 
 /* main program starts here */
 int main(void) {
-    1d00:	11 24       	eor	r1, r1
+   0:	11 24       	eor	r1, r1
 #ifdef __AVR_ATmega8__
   SP=RAMEND;  // This is done by hardware reset
 #endif
 
   // Adaboot no-wait mod
   ch = MCUSR;
-    1d02:	84 b7       	in	r24, 0x34	; 52
+   2:	84 b7       	in	r24, 0x34	; 52
   MCUSR = 0;
-    1d04:	14 be       	out	0x34, r1	; 52
+   4:	14 be       	out	0x34, r1	; 52
   if (!(ch & _BV(EXTRF))) appStart();
-    1d06:	81 ff       	sbrs	r24, 1
-    1d08:	22 d1       	rcall	.+580    	; 0x1f4e <appStart>
+   6:	81 ff       	sbrs	r24, 1
+   8:	22 d1       	rcall	.+580    	; 0x24e <appStart>
 
 #if LED_START_FLASHES > 0
   // Set up Timer 1 for timeout counter
   TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
-    1d0a:	85 e0       	ldi	r24, 0x05	; 5
-    1d0c:	8e bd       	out	0x2e, r24	; 46
+   a:	85 e0       	ldi	r24, 0x05	; 5
+   c:	8e bd       	out	0x2e, r24	; 46
   UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
 #endif
 #endif
 
   // Set up watchdog to trigger after 500ms
   watchdogConfig(WATCHDOG_1S);
-    1d0e:	8e e0       	ldi	r24, 0x0E	; 14
-    1d10:	1a d1       	rcall	.+564    	; 0x1f46 <watchdogConfig>
+   e:	8e e0       	ldi	r24, 0x0E	; 14
+  10:	1a d1       	rcall	.+564    	; 0x246 <watchdogConfig>
 
   /* Set LED pin as output */
   LED_DDR |= _BV(LED);
-    1d12:	d4 9a       	sbi	0x1a, 4	; 26
+  12:	d4 9a       	sbi	0x1a, 4	; 26
 
 #ifdef SOFT_UART
   /* Set TX pin as output */
   UART_DDR |= _BV(UART_TX_BIT);
-    1d14:	d2 9a       	sbi	0x1a, 2	; 26
-    1d16:	86 e0       	ldi	r24, 0x06	; 6
+  14:	d2 9a       	sbi	0x1a, 2	; 26
+  16:	86 e0       	ldi	r24, 0x06	; 6
 }
 
 #if LED_START_FLASHES > 0
 void flash_led(uint8_t count) {
   do {
     TCNT1 = -(F_CPU/(1024*16));
-    1d18:	23 ec       	ldi	r18, 0xC3	; 195
-    1d1a:	3f ef       	ldi	r19, 0xFF	; 255
+  18:	23 ec       	ldi	r18, 0xC3	; 195
+  1a:	3f ef       	ldi	r19, 0xFF	; 255
     TIFR1 = _BV(TOV1);
-    1d1c:	91 e0       	ldi	r25, 0x01	; 1
+  1c:	91 e0       	ldi	r25, 0x01	; 1
 }
 
 #if LED_START_FLASHES > 0
 void flash_led(uint8_t count) {
   do {
     TCNT1 = -(F_CPU/(1024*16));
-    1d1e:	3d bd       	out	0x2d, r19	; 45
-    1d20:	2c bd       	out	0x2c, r18	; 44
+  1e:	3d bd       	out	0x2d, r19	; 45
+  20:	2c bd       	out	0x2c, r18	; 44
     TIFR1 = _BV(TOV1);
-    1d22:	9b b9       	out	0x0b, r25	; 11
+  22:	9b b9       	out	0x0b, r25	; 11
     while(!(TIFR1 & _BV(TOV1)));
-    1d24:	58 9b       	sbis	0x0b, 0	; 11
-    1d26:	fe cf       	rjmp	.-4      	; 0x1d24 <main+0x24>
+  24:	58 9b       	sbis	0x0b, 0	; 11
+  26:	fe cf       	rjmp	.-4      	; 0x24 <__zero_reg__+0x23>
 #ifdef __AVR_ATmega8__
     LED_PORT ^= _BV(LED);
 #else
     LED_PIN |= _BV(LED);
-    1d28:	cc 9a       	sbi	0x19, 4	; 25
+  28:	cc 9a       	sbi	0x19, 4	; 25
   return getch();
 }
 
 // Watchdog functions. These are only safe with interrupts turned off.
 void watchdogReset() {
   __asm__ __volatile__ (
-    1d2a:	a8 95       	wdr
+  2a:	a8 95       	wdr
     LED_PORT ^= _BV(LED);
 #else
     LED_PIN |= _BV(LED);
 #endif
     watchdogReset();
   } while (--count);
-    1d2c:	81 50       	subi	r24, 0x01	; 1
-    1d2e:	b9 f7       	brne	.-18     	; 0x1d1e <main+0x1e>
+  2c:	81 50       	subi	r24, 0x01	; 1
+  2e:	b9 f7       	brne	.-18     	; 0x1e <__zero_reg__+0x1d>
     /* get character from UART */
     ch = getch();
 
     if(ch == STK_GET_PARAMETER) {
       // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
       getNch(1);
-    1d30:	dd 24       	eor	r13, r13
-    1d32:	d3 94       	inc	r13
+  30:	dd 24       	eor	r13, r13
+  32:	d3 94       	inc	r13
         __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
         addrPtr += 2;
       } while (--ch);
-      
+
       // Write from programming buffer
       __boot_page_write_short((uint16_t)(void*)address);
-    1d34:	85 e0       	ldi	r24, 0x05	; 5
-    1d36:	c8 2e       	mov	r12, r24
+  34:	85 e0       	ldi	r24, 0x05	; 5
+  36:	c8 2e       	mov	r12, r24
         vect -= 4; // Instruction is a relative jump (rjmp), so recalculate.
         buff[8] = vect & 0xff;
         buff[9] = vect >> 8;
 
         // Add jump to bootloader at RESET vector
         buff[0] = 0x7f;
-    1d38:	0f e7       	ldi	r16, 0x7F	; 127
-    1d3a:	f0 2e       	mov	r15, r16
+  38:	0f e7       	ldi	r16, 0x7F	; 127
+  3a:	f0 2e       	mov	r15, r16
         buff[1] = 0xce; // rjmp 0x1d00 instruction
-    1d3c:	1e ec       	ldi	r17, 0xCE	; 206
-    1d3e:	e1 2e       	mov	r14, r17
+  3c:	1e ec       	ldi	r17, 0xCE	; 206
+  3e:	e1 2e       	mov	r14, r17
 #endif
 
   /* Forever loop */
   for (;;) {
     /* get character from UART */
     ch = getch();
-    1d40:	e9 d0       	rcall	.+466    	; 0x1f14 <getch>
+  40:	e9 d0       	rcall	.+466    	; 0x214 <getch>
 
     if(ch == STK_GET_PARAMETER) {
-    1d42:	81 34       	cpi	r24, 0x41	; 65
-    1d44:	21 f4       	brne	.+8      	; 0x1d4e <main+0x4e>
+  42:	81 34       	cpi	r24, 0x41	; 65
+  44:	21 f4       	brne	.+8      	; 0x4e <__SREG__+0xf>
       // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
       getNch(1);
-    1d46:	81 e0       	ldi	r24, 0x01	; 1
-    1d48:	0d d1       	rcall	.+538    	; 0x1f64 <getNch>
+  46:	81 e0       	ldi	r24, 0x01	; 1
+  48:	0d d1       	rcall	.+538    	; 0x264 <getNch>
       putch(0x03);
-    1d4a:	83 e0       	ldi	r24, 0x03	; 3
-    1d4c:	20 c0       	rjmp	.+64     	; 0x1d8e <main+0x8e>
+  4a:	83 e0       	ldi	r24, 0x03	; 3
+  4c:	20 c0       	rjmp	.+64     	; 0x8e <__SREG__+0x4f>
     }
     else if(ch == STK_SET_DEVICE) {
-    1d4e:	82 34       	cpi	r24, 0x42	; 66
-    1d50:	11 f4       	brne	.+4      	; 0x1d56 <main+0x56>
+  4e:	82 34       	cpi	r24, 0x42	; 66
+  50:	11 f4       	brne	.+4      	; 0x56 <__SREG__+0x17>
       // SET DEVICE is ignored
       getNch(20);
-    1d52:	84 e1       	ldi	r24, 0x14	; 20
-    1d54:	03 c0       	rjmp	.+6      	; 0x1d5c <main+0x5c>
+  52:	84 e1       	ldi	r24, 0x14	; 20
+  54:	03 c0       	rjmp	.+6      	; 0x5c <__SREG__+0x1d>
     }
     else if(ch == STK_SET_DEVICE_EXT) {
-    1d56:	85 34       	cpi	r24, 0x45	; 69
-    1d58:	19 f4       	brne	.+6      	; 0x1d60 <main+0x60>
+  56:	85 34       	cpi	r24, 0x45	; 69
+  58:	19 f4       	brne	.+6      	; 0x60 <__SREG__+0x21>
       // SET DEVICE EXT is ignored
       getNch(5);
-    1d5a:	85 e0       	ldi	r24, 0x05	; 5
-    1d5c:	03 d1       	rcall	.+518    	; 0x1f64 <getNch>
-    1d5e:	c8 c0       	rjmp	.+400    	; 0x1ef0 <main+0x1f0>
+  5a:	85 e0       	ldi	r24, 0x05	; 5
+  5c:	03 d1       	rcall	.+518    	; 0x264 <getNch>
+  5e:	c8 c0       	rjmp	.+400    	; 0x1f0 <__SREG__+0x1b1>
     }
     else if(ch == STK_LOAD_ADDRESS) {
-    1d60:	85 35       	cpi	r24, 0x55	; 85
-    1d62:	81 f4       	brne	.+32     	; 0x1d84 <main+0x84>
+  60:	85 35       	cpi	r24, 0x55	; 85
+  62:	81 f4       	brne	.+32     	; 0x84 <__SREG__+0x45>
       // LOAD ADDRESS
       uint16_t newAddress;
       newAddress = getch();
-    1d64:	d7 d0       	rcall	.+430    	; 0x1f14 <getch>
+  64:	d7 d0       	rcall	.+430    	; 0x214 <getch>
       newAddress = (newAddress & 0xff) | (getch() << 8);
-    1d66:	08 2f       	mov	r16, r24
-    1d68:	10 e0       	ldi	r17, 0x00	; 0
-    1d6a:	d4 d0       	rcall	.+424    	; 0x1f14 <getch>
-    1d6c:	90 e0       	ldi	r25, 0x00	; 0
-    1d6e:	98 2f       	mov	r25, r24
-    1d70:	88 27       	eor	r24, r24
-    1d72:	80 2b       	or	r24, r16
-    1d74:	91 2b       	or	r25, r17
+  66:	08 2f       	mov	r16, r24
+  68:	10 e0       	ldi	r17, 0x00	; 0
+  6a:	d4 d0       	rcall	.+424    	; 0x214 <getch>
+  6c:	90 e0       	ldi	r25, 0x00	; 0
+  6e:	98 2f       	mov	r25, r24
+  70:	88 27       	eor	r24, r24
+  72:	80 2b       	or	r24, r16
+  74:	91 2b       	or	r25, r17
 #ifdef RAMPZ
       // Transfer top bit to RAMPZ
       RAMPZ = (newAddress & 0x8000) ? 1 : 0;
 #endif
       newAddress += newAddress; // Convert from word address to byte address
-    1d76:	88 0f       	add	r24, r24
-    1d78:	99 1f       	adc	r25, r25
+  76:	88 0f       	add	r24, r24
+  78:	99 1f       	adc	r25, r25
       address = newAddress;
-    1d7a:	90 93 81 01 	sts	0x0181, r25
-    1d7e:	80 93 80 01 	sts	0x0180, r24
-    1d82:	b5 c0       	rjmp	.+362    	; 0x1eee <main+0x1ee>
+  7a:	90 93 81 01 	sts	0x0181, r25
+  7e:	80 93 80 01 	sts	0x0180, r24
+  82:	b5 c0       	rjmp	.+362    	; 0x1ee <__SREG__+0x1af>
       verifySpace();
     }
     else if(ch == STK_UNIVERSAL) {
-    1d84:	86 35       	cpi	r24, 0x56	; 86
-    1d86:	29 f4       	brne	.+10     	; 0x1d92 <main+0x92>
+  84:	86 35       	cpi	r24, 0x56	; 86
+  86:	29 f4       	brne	.+10     	; 0x92 <__SREG__+0x53>
       // UNIVERSAL command is ignored
       getNch(4);
-    1d88:	84 e0       	ldi	r24, 0x04	; 4
-    1d8a:	ec d0       	rcall	.+472    	; 0x1f64 <getNch>
+  88:	84 e0       	ldi	r24, 0x04	; 4
+  8a:	ec d0       	rcall	.+472    	; 0x264 <getNch>
       putch(0x00);
-    1d8c:	80 e0       	ldi	r24, 0x00	; 0
-    1d8e:	b3 d0       	rcall	.+358    	; 0x1ef6 <putch>
-    1d90:	af c0       	rjmp	.+350    	; 0x1ef0 <main+0x1f0>
+  8c:	80 e0       	ldi	r24, 0x00	; 0
+  8e:	b3 d0       	rcall	.+358    	; 0x1f6 <putch>
+  90:	af c0       	rjmp	.+350    	; 0x1f0 <__SREG__+0x1b1>
     }
     /* Write memory, length is big endian and is in bytes */
     else if(ch == STK_PROG_PAGE) {
-    1d92:	84 36       	cpi	r24, 0x64	; 100
-    1d94:	09 f0       	breq	.+2      	; 0x1d98 <main+0x98>
-    1d96:	6b c0       	rjmp	.+214    	; 0x1e6e <main+0x16e>
+  92:	84 36       	cpi	r24, 0x64	; 100
+  94:	09 f0       	breq	.+2      	; 0x98 <__SREG__+0x59>
+  96:	6b c0       	rjmp	.+214    	; 0x16e <__SREG__+0x12f>
       // PROGRAM PAGE - we support flash programming only, not EEPROM
       uint8_t *bufPtr;
       uint16_t addrPtr;
 
       getLen();
-    1d98:	d1 d0       	rcall	.+418    	; 0x1f3c <getLen>
-    1d9a:	c0 e0       	ldi	r28, 0x00	; 0
-    1d9c:	d1 e0       	ldi	r29, 0x01	; 1
+  98:	d1 d0       	rcall	.+418    	; 0x23c <getLen>
+  9a:	c0 e0       	ldi	r28, 0x00	; 0
+  9c:	d1 e0       	ldi	r29, 0x01	; 1
       // If we are in RWW section, immediately start page erase
       if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-      
+
       // While that is going on, read in page contents
       bufPtr = buff;
       do *bufPtr++ = getch();
-    1d9e:	ba d0       	rcall	.+372    	; 0x1f14 <getch>
-    1da0:	89 93       	st	Y+, r24
+  9e:	ba d0       	rcall	.+372    	; 0x214 <getch>
+  a0:	89 93       	st	Y+, r24
       while (--length);
-    1da2:	80 91 82 01 	lds	r24, 0x0182
-    1da6:	81 50       	subi	r24, 0x01	; 1
-    1da8:	80 93 82 01 	sts	0x0182, r24
-    1dac:	88 23       	and	r24, r24
-    1dae:	b9 f7       	brne	.-18     	; 0x1d9e <main+0x9e>
+  a2:	80 91 82 01 	lds	r24, 0x0182
+  a6:	81 50       	subi	r24, 0x01	; 1
+  a8:	80 93 82 01 	sts	0x0182, r24
+  ac:	88 23       	and	r24, r24
+  ae:	b9 f7       	brne	.-18     	; 0x9e <__SREG__+0x5f>
 
       // If we are in NRWW section, page erase has to be delayed until now.
       // Todo: Take RAMPZ into account
       if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-    1db0:	e0 91 80 01 	lds	r30, 0x0180
-    1db4:	f0 91 81 01 	lds	r31, 0x0181
-    1db8:	83 e0       	ldi	r24, 0x03	; 3
-    1dba:	87 bf       	out	0x37, r24	; 55
-    1dbc:	e8 95       	spm
+  b0:	e0 91 80 01 	lds	r30, 0x0180
+  b4:	f0 91 81 01 	lds	r31, 0x0181
+  b8:	83 e0       	ldi	r24, 0x03	; 3
+  ba:	87 bf       	out	0x37, r24	; 55
+  bc:	e8 95       	spm
 
       // Read command terminator, start reply
       verifySpace();
-    1dbe:	cc d0       	rcall	.+408    	; 0x1f58 <verifySpace>
-      
+  be:	cc d0       	rcall	.+408    	; 0x258 <verifySpace>
+
       // If only a partial page is to be programmed, the erase might not be complete.
       // So check that here
       boot_spm_busy_wait();
-    1dc0:	07 b6       	in	r0, 0x37	; 55
-    1dc2:	00 fc       	sbrc	r0, 0
-    1dc4:	fd cf       	rjmp	.-6      	; 0x1dc0 <main+0xc0>
+  c0:	07 b6       	in	r0, 0x37	; 55
+  c2:	00 fc       	sbrc	r0, 0
+  c4:	fd cf       	rjmp	.-6      	; 0xc0 <__SREG__+0x81>
 
 #ifdef VIRTUAL_BOOT_PARTITION
       if ((uint16_t)(void*)address == 0) {
-    1dc6:	80 91 80 01 	lds	r24, 0x0180
-    1dca:	90 91 81 01 	lds	r25, 0x0181
-    1dce:	89 2b       	or	r24, r25
-    1dd0:	41 f5       	brne	.+80     	; 0x1e22 <main+0x122>
+  c6:	80 91 80 01 	lds	r24, 0x0180
+  ca:	90 91 81 01 	lds	r25, 0x0181
+  ce:	89 2b       	or	r24, r25
+  d0:	41 f5       	brne	.+80     	; 0x122 <__SREG__+0xe3>
         // This is the reset vector page. We need to live-patch the code so the
         // bootloader runs.
         //
         // Move RESET vector to WDT vector
         uint16_t vect = buff[0] | (buff[1]<<8);
-    1dd2:	80 91 00 01 	lds	r24, 0x0100
-    1dd6:	20 91 01 01 	lds	r18, 0x0101
-    1dda:	30 e0       	ldi	r19, 0x00	; 0
-    1ddc:	32 2f       	mov	r19, r18
-    1dde:	22 27       	eor	r18, r18
-    1de0:	90 e0       	ldi	r25, 0x00	; 0
-    1de2:	28 2b       	or	r18, r24
-    1de4:	39 2b       	or	r19, r25
+  d2:	80 91 00 01 	lds	r24, 0x0100
+  d6:	20 91 01 01 	lds	r18, 0x0101
+  da:	30 e0       	ldi	r19, 0x00	; 0
+  dc:	32 2f       	mov	r19, r18
+  de:	22 27       	eor	r18, r18
+  e0:	90 e0       	ldi	r25, 0x00	; 0
+  e2:	28 2b       	or	r18, r24
+  e4:	39 2b       	or	r19, r25
         rstVect = vect;
-    1de6:	30 93 85 01 	sts	0x0185, r19
-    1dea:	20 93 84 01 	sts	0x0184, r18
+  e6:	30 93 85 01 	sts	0x0185, r19
+  ea:	20 93 84 01 	sts	0x0184, r18
         wdtVect = buff[8] | (buff[9]<<8);
-    1dee:	40 91 08 01 	lds	r20, 0x0108
-    1df2:	80 91 09 01 	lds	r24, 0x0109
-    1df6:	90 e0       	ldi	r25, 0x00	; 0
-    1df8:	98 2f       	mov	r25, r24
-    1dfa:	88 27       	eor	r24, r24
-    1dfc:	50 e0       	ldi	r21, 0x00	; 0
-    1dfe:	84 2b       	or	r24, r20
-    1e00:	95 2b       	or	r25, r21
-    1e02:	90 93 87 01 	sts	0x0187, r25
-    1e06:	80 93 86 01 	sts	0x0186, r24
+  ee:	40 91 08 01 	lds	r20, 0x0108
+  f2:	80 91 09 01 	lds	r24, 0x0109
+  f6:	90 e0       	ldi	r25, 0x00	; 0
+  f8:	98 2f       	mov	r25, r24
+  fa:	88 27       	eor	r24, r24
+  fc:	50 e0       	ldi	r21, 0x00	; 0
+  fe:	84 2b       	or	r24, r20
+ 100:	95 2b       	or	r25, r21
+ 102:	90 93 87 01 	sts	0x0187, r25
+ 106:	80 93 86 01 	sts	0x0186, r24
         vect -= 4; // Instruction is a relative jump (rjmp), so recalculate.
-    1e0a:	24 50       	subi	r18, 0x04	; 4
-    1e0c:	30 40       	sbci	r19, 0x00	; 0
+ 10a:	24 50       	subi	r18, 0x04	; 4
+ 10c:	30 40       	sbci	r19, 0x00	; 0
         buff[8] = vect & 0xff;
-    1e0e:	20 93 08 01 	sts	0x0108, r18
+ 10e:	20 93 08 01 	sts	0x0108, r18
         buff[9] = vect >> 8;
-    1e12:	23 2f       	mov	r18, r19
-    1e14:	33 27       	eor	r19, r19
-    1e16:	20 93 09 01 	sts	0x0109, r18
+ 112:	23 2f       	mov	r18, r19
+ 114:	33 27       	eor	r19, r19
+ 116:	20 93 09 01 	sts	0x0109, r18
 
         // Add jump to bootloader at RESET vector
         buff[0] = 0x7f;
-    1e1a:	f0 92 00 01 	sts	0x0100, r15
+ 11a:	f0 92 00 01 	sts	0x0100, r15
         buff[1] = 0xce; // rjmp 0x1d00 instruction
-    1e1e:	e0 92 01 01 	sts	0x0101, r14
+ 11e:	e0 92 01 01 	sts	0x0101, r14
       }
 #endif
 
       // Copy buffer into programming buffer
       bufPtr = buff;
       addrPtr = (uint16_t)(void*)address;
-    1e22:	40 91 80 01 	lds	r20, 0x0180
-    1e26:	50 91 81 01 	lds	r21, 0x0181
-    1e2a:	a0 e0       	ldi	r26, 0x00	; 0
-    1e2c:	b1 e0       	ldi	r27, 0x01	; 1
+ 122:	40 91 80 01 	lds	r20, 0x0180
+ 126:	50 91 81 01 	lds	r21, 0x0181
+ 12a:	a0 e0       	ldi	r26, 0x00	; 0
+ 12c:	b1 e0       	ldi	r27, 0x01	; 1
       ch = SPM_PAGESIZE / 2;
       do {
         uint16_t a;
         a = *bufPtr++;
-    1e2e:	2c 91       	ld	r18, X
-    1e30:	30 e0       	ldi	r19, 0x00	; 0
+ 12e:	2c 91       	ld	r18, X
+ 130:	30 e0       	ldi	r19, 0x00	; 0
         a |= (*bufPtr++) << 8;
-    1e32:	11 96       	adiw	r26, 0x01	; 1
-    1e34:	8c 91       	ld	r24, X
-    1e36:	11 97       	sbiw	r26, 0x01	; 1
-    1e38:	90 e0       	ldi	r25, 0x00	; 0
-    1e3a:	98 2f       	mov	r25, r24
-    1e3c:	88 27       	eor	r24, r24
-    1e3e:	82 2b       	or	r24, r18
-    1e40:	93 2b       	or	r25, r19
+ 132:	11 96       	adiw	r26, 0x01	; 1
+ 134:	8c 91       	ld	r24, X
+ 136:	11 97       	sbiw	r26, 0x01	; 1
+ 138:	90 e0       	ldi	r25, 0x00	; 0
+ 13a:	98 2f       	mov	r25, r24
+ 13c:	88 27       	eor	r24, r24
+ 13e:	82 2b       	or	r24, r18
+ 140:	93 2b       	or	r25, r19
 #define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
 #define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
 #endif
 
 /* main program starts here */
 int main(void) {
-    1e42:	12 96       	adiw	r26, 0x02	; 2
+ 142:	12 96       	adiw	r26, 0x02	; 2
       ch = SPM_PAGESIZE / 2;
       do {
         uint16_t a;
         a = *bufPtr++;
         a |= (*bufPtr++) << 8;
         __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
-    1e44:	fa 01       	movw	r30, r20
-    1e46:	0c 01       	movw	r0, r24
-    1e48:	d7 be       	out	0x37, r13	; 55
-    1e4a:	e8 95       	spm
-    1e4c:	11 24       	eor	r1, r1
+ 144:	fa 01       	movw	r30, r20
+ 146:	0c 01       	movw	r0, r24
+ 148:	d7 be       	out	0x37, r13	; 55
+ 14a:	e8 95       	spm
+ 14c:	11 24       	eor	r1, r1
         addrPtr += 2;
-    1e4e:	4e 5f       	subi	r20, 0xFE	; 254
-    1e50:	5f 4f       	sbci	r21, 0xFF	; 255
+ 14e:	4e 5f       	subi	r20, 0xFE	; 254
+ 150:	5f 4f       	sbci	r21, 0xFF	; 255
       } while (--ch);
-    1e52:	f1 e0       	ldi	r31, 0x01	; 1
-    1e54:	a0 34       	cpi	r26, 0x40	; 64
-    1e56:	bf 07       	cpc	r27, r31
-    1e58:	51 f7       	brne	.-44     	; 0x1e2e <main+0x12e>
-      
+ 152:	f1 e0       	ldi	r31, 0x01	; 1
+ 154:	a0 34       	cpi	r26, 0x40	; 64
+ 156:	bf 07       	cpc	r27, r31
+ 158:	51 f7       	brne	.-44     	; 0x12e <__SREG__+0xef>
+
       // Write from programming buffer
       __boot_page_write_short((uint16_t)(void*)address);
-    1e5a:	e0 91 80 01 	lds	r30, 0x0180
-    1e5e:	f0 91 81 01 	lds	r31, 0x0181
-    1e62:	c7 be       	out	0x37, r12	; 55
-    1e64:	e8 95       	spm
+ 15a:	e0 91 80 01 	lds	r30, 0x0180
+ 15e:	f0 91 81 01 	lds	r31, 0x0181
+ 162:	c7 be       	out	0x37, r12	; 55
+ 164:	e8 95       	spm
       boot_spm_busy_wait();
-    1e66:	07 b6       	in	r0, 0x37	; 55
-    1e68:	00 fc       	sbrc	r0, 0
-    1e6a:	fd cf       	rjmp	.-6      	; 0x1e66 <main+0x166>
-    1e6c:	41 c0       	rjmp	.+130    	; 0x1ef0 <main+0x1f0>
+ 166:	07 b6       	in	r0, 0x37	; 55
+ 168:	00 fc       	sbrc	r0, 0
+ 16a:	fd cf       	rjmp	.-6      	; 0x166 <__SREG__+0x127>
+ 16c:	41 c0       	rjmp	.+130    	; 0x1f0 <__SREG__+0x1b1>
       boot_rww_enable();
 #endif
 
     }
     /* Read memory block mode, length is big endian.  */
     else if(ch == STK_READ_PAGE) {
-    1e6e:	84 37       	cpi	r24, 0x74	; 116
-    1e70:	89 f5       	brne	.+98     	; 0x1ed4 <main+0x1d4>
+ 16e:	84 37       	cpi	r24, 0x74	; 116
+ 170:	89 f5       	brne	.+98     	; 0x1d4 <__SREG__+0x195>
       // READ PAGE - we only read flash
       getLen();
-    1e72:	64 d0       	rcall	.+200    	; 0x1f3c <getLen>
+ 172:	64 d0       	rcall	.+200    	; 0x23c <getLen>
       verifySpace();
-    1e74:	71 d0       	rcall	.+226    	; 0x1f58 <verifySpace>
+ 174:	71 d0       	rcall	.+226    	; 0x258 <verifySpace>
 #ifdef VIRTUAL_BOOT_PARTITION
       do {
         // Undo vector patch in bottom page so verify passes
         if (address == 0)       ch=rstVect & 0xff;
-    1e76:	e0 91 80 01 	lds	r30, 0x0180
-    1e7a:	f0 91 81 01 	lds	r31, 0x0181
-    1e7e:	30 97       	sbiw	r30, 0x00	; 0
-    1e80:	19 f4       	brne	.+6      	; 0x1e88 <main+0x188>
-    1e82:	20 91 84 01 	lds	r18, 0x0184
-    1e86:	13 c0       	rjmp	.+38     	; 0x1eae <main+0x1ae>
+ 176:	e0 91 80 01 	lds	r30, 0x0180
+ 17a:	f0 91 81 01 	lds	r31, 0x0181
+ 17e:	30 97       	sbiw	r30, 0x00	; 0
+ 180:	19 f4       	brne	.+6      	; 0x188 <__SREG__+0x149>
+ 182:	20 91 84 01 	lds	r18, 0x0184
+ 186:	13 c0       	rjmp	.+38     	; 0x1ae <__SREG__+0x16f>
         else if (address == 1)  ch=rstVect >> 8;
-    1e88:	e1 30       	cpi	r30, 0x01	; 1
-    1e8a:	f1 05       	cpc	r31, r1
-    1e8c:	19 f4       	brne	.+6      	; 0x1e94 <main+0x194>
-    1e8e:	20 91 85 01 	lds	r18, 0x0185
-    1e92:	0d c0       	rjmp	.+26     	; 0x1eae <main+0x1ae>
+ 188:	e1 30       	cpi	r30, 0x01	; 1
+ 18a:	f1 05       	cpc	r31, r1
+ 18c:	19 f4       	brne	.+6      	; 0x194 <__SREG__+0x155>
+ 18e:	20 91 85 01 	lds	r18, 0x0185
+ 192:	0d c0       	rjmp	.+26     	; 0x1ae <__SREG__+0x16f>
         else if (address == 8)  ch=wdtVect & 0xff;
-    1e94:	e8 30       	cpi	r30, 0x08	; 8
-    1e96:	f1 05       	cpc	r31, r1
-    1e98:	19 f4       	brne	.+6      	; 0x1ea0 <main+0x1a0>
-    1e9a:	20 91 86 01 	lds	r18, 0x0186
-    1e9e:	07 c0       	rjmp	.+14     	; 0x1eae <main+0x1ae>
+ 194:	e8 30       	cpi	r30, 0x08	; 8
+ 196:	f1 05       	cpc	r31, r1
+ 198:	19 f4       	brne	.+6      	; 0x1a0 <__SREG__+0x161>
+ 19a:	20 91 86 01 	lds	r18, 0x0186
+ 19e:	07 c0       	rjmp	.+14     	; 0x1ae <__SREG__+0x16f>
         else if (address == 9) ch=wdtVect >> 8;
-    1ea0:	e9 30       	cpi	r30, 0x09	; 9
-    1ea2:	f1 05       	cpc	r31, r1
-    1ea4:	19 f4       	brne	.+6      	; 0x1eac <main+0x1ac>
-    1ea6:	20 91 87 01 	lds	r18, 0x0187
-    1eaa:	01 c0       	rjmp	.+2      	; 0x1eae <main+0x1ae>
+ 1a0:	e9 30       	cpi	r30, 0x09	; 9
+ 1a2:	f1 05       	cpc	r31, r1
+ 1a4:	19 f4       	brne	.+6      	; 0x1ac <__SREG__+0x16d>
+ 1a6:	20 91 87 01 	lds	r18, 0x0187
+ 1aa:	01 c0       	rjmp	.+2      	; 0x1ae <__SREG__+0x16f>
         else ch = pgm_read_byte_near(address);
-    1eac:	24 91       	lpm	r18, Z+
+ 1ac:	24 91       	lpm	r18, Z+
         address++;
-    1eae:	80 91 80 01 	lds	r24, 0x0180
-    1eb2:	90 91 81 01 	lds	r25, 0x0181
-    1eb6:	01 96       	adiw	r24, 0x01	; 1
-    1eb8:	90 93 81 01 	sts	0x0181, r25
-    1ebc:	80 93 80 01 	sts	0x0180, r24
+ 1ae:	80 91 80 01 	lds	r24, 0x0180
+ 1b2:	90 91 81 01 	lds	r25, 0x0181
+ 1b6:	01 96       	adiw	r24, 0x01	; 1
+ 1b8:	90 93 81 01 	sts	0x0181, r25
+ 1bc:	80 93 80 01 	sts	0x0180, r24
         putch(ch);
-    1ec0:	82 2f       	mov	r24, r18
-    1ec2:	19 d0       	rcall	.+50     	; 0x1ef6 <putch>
+ 1c0:	82 2f       	mov	r24, r18
+ 1c2:	19 d0       	rcall	.+50     	; 0x1f6 <putch>
       } while (--length);
-    1ec4:	80 91 82 01 	lds	r24, 0x0182
-    1ec8:	81 50       	subi	r24, 0x01	; 1
-    1eca:	80 93 82 01 	sts	0x0182, r24
-    1ece:	88 23       	and	r24, r24
-    1ed0:	91 f6       	brne	.-92     	; 0x1e76 <main+0x176>
-    1ed2:	0e c0       	rjmp	.+28     	; 0x1ef0 <main+0x1f0>
+ 1c4:	80 91 82 01 	lds	r24, 0x0182
+ 1c8:	81 50       	subi	r24, 0x01	; 1
+ 1ca:	80 93 82 01 	sts	0x0182, r24
+ 1ce:	88 23       	and	r24, r24
+ 1d0:	91 f6       	brne	.-92     	; 0x176 <__SREG__+0x137>
+ 1d2:	0e c0       	rjmp	.+28     	; 0x1f0 <__SREG__+0x1b1>
 #endif
 #endif
     }
 
     /* Get device signature bytes  */
     else if(ch == STK_READ_SIGN) {
-    1ed4:	85 37       	cpi	r24, 0x75	; 117
-    1ed6:	39 f4       	brne	.+14     	; 0x1ee6 <main+0x1e6>
+ 1d4:	85 37       	cpi	r24, 0x75	; 117
+ 1d6:	39 f4       	brne	.+14     	; 0x1e6 <__SREG__+0x1a7>
       // READ SIGN - return what Avrdude wants to hear
       verifySpace();
-    1ed8:	3f d0       	rcall	.+126    	; 0x1f58 <verifySpace>
+ 1d8:	3f d0       	rcall	.+126    	; 0x258 <verifySpace>
       putch(SIGNATURE_0);
-    1eda:	8e e1       	ldi	r24, 0x1E	; 30
-    1edc:	0c d0       	rcall	.+24     	; 0x1ef6 <putch>
+ 1da:	8e e1       	ldi	r24, 0x1E	; 30
+ 1dc:	0c d0       	rcall	.+24     	; 0x1f6 <putch>
       putch(SIGNATURE_1);
-    1ede:	83 e9       	ldi	r24, 0x93	; 147
-    1ee0:	0a d0       	rcall	.+20     	; 0x1ef6 <putch>
+ 1de:	83 e9       	ldi	r24, 0x93	; 147
+ 1e0:	0a d0       	rcall	.+20     	; 0x1f6 <putch>
       putch(SIGNATURE_2);
-    1ee2:	8c e0       	ldi	r24, 0x0C	; 12
-    1ee4:	54 cf       	rjmp	.-344    	; 0x1d8e <main+0x8e>
+ 1e2:	8c e0       	ldi	r24, 0x0C	; 12
+ 1e4:	54 cf       	rjmp	.-344    	; 0x8e <__SREG__+0x4f>
     }
     else if (ch == 'Q') {
-    1ee6:	81 35       	cpi	r24, 0x51	; 81
-    1ee8:	11 f4       	brne	.+4      	; 0x1eee <main+0x1ee>
+ 1e6:	81 35       	cpi	r24, 0x51	; 81
+ 1e8:	11 f4       	brne	.+4      	; 0x1ee <__SREG__+0x1af>
       // Adaboot no-wait mod
       watchdogConfig(WATCHDOG_16MS);
-    1eea:	88 e0       	ldi	r24, 0x08	; 8
-    1eec:	2c d0       	rcall	.+88     	; 0x1f46 <watchdogConfig>
+ 1ea:	88 e0       	ldi	r24, 0x08	; 8
+ 1ec:	2c d0       	rcall	.+88     	; 0x246 <watchdogConfig>
       verifySpace();
     }
     else {
       // This covers the response to commands like STK_ENTER_PROGMODE
       verifySpace();
-    1eee:	34 d0       	rcall	.+104    	; 0x1f58 <verifySpace>
+ 1ee:	34 d0       	rcall	.+104    	; 0x258 <verifySpace>
     }
     putch(STK_OK);
-    1ef0:	80 e1       	ldi	r24, 0x10	; 16
-    1ef2:	01 d0       	rcall	.+2      	; 0x1ef6 <putch>
-    1ef4:	25 cf       	rjmp	.-438    	; 0x1d40 <main+0x40>
+ 1f0:	80 e1       	ldi	r24, 0x10	; 16
+ 1f2:	01 d0       	rcall	.+2      	; 0x1f6 <putch>
+ 1f4:	25 cf       	rjmp	.-438    	; 0x40 <__SREG__+0x1>
 
-00001ef6 <putch>:
+000001f6 <putch>:
 void putch(char ch) {
 #ifndef SOFT_UART
   while (!(UCSR0A & _BV(UDRE0)));
   UDR0 = ch;
 #else
   __asm__ __volatile__ (
-    1ef6:	2a e0       	ldi	r18, 0x0A	; 10
-    1ef8:	30 e0       	ldi	r19, 0x00	; 0
-    1efa:	80 95       	com	r24
-    1efc:	08 94       	sec
-    1efe:	10 f4       	brcc	.+4      	; 0x1f04 <putch+0xe>
-    1f00:	da 98       	cbi	0x1b, 2	; 27
-    1f02:	02 c0       	rjmp	.+4      	; 0x1f08 <putch+0x12>
-    1f04:	da 9a       	sbi	0x1b, 2	; 27
-    1f06:	00 00       	nop
-    1f08:	15 d0       	rcall	.+42     	; 0x1f34 <uartDelay>
-    1f0a:	14 d0       	rcall	.+40     	; 0x1f34 <uartDelay>
-    1f0c:	86 95       	lsr	r24
-    1f0e:	2a 95       	dec	r18
-    1f10:	b1 f7       	brne	.-20     	; 0x1efe <putch+0x8>
+ 1f6:	2a e0       	ldi	r18, 0x0A	; 10
+ 1f8:	30 e0       	ldi	r19, 0x00	; 0
+ 1fa:	80 95       	com	r24
+ 1fc:	08 94       	sec
+ 1fe:	10 f4       	brcc	.+4      	; 0x204 <putch+0xe>
+ 200:	da 98       	cbi	0x1b, 2	; 27
+ 202:	02 c0       	rjmp	.+4      	; 0x208 <putch+0x12>
+ 204:	da 9a       	sbi	0x1b, 2	; 27
+ 206:	00 00       	nop
+ 208:	15 d0       	rcall	.+42     	; 0x234 <uartDelay>
+ 20a:	14 d0       	rcall	.+40     	; 0x234 <uartDelay>
+ 20c:	86 95       	lsr	r24
+ 20e:	2a 95       	dec	r18
+ 210:	b1 f7       	brne	.-20     	; 0x1fe <putch+0x8>
       [uartBit] "I" (UART_TX_BIT)
     :
       "r25"
   );
 #endif
 }
-    1f12:	08 95       	ret
+ 212:	08 95       	ret
 
-00001f14 <getch>:
+00000214 <getch>:
   return getch();
 }
 
 // Watchdog functions. These are only safe with interrupts turned off.
 void watchdogReset() {
   __asm__ __volatile__ (
-    1f14:	a8 95       	wdr
+ 214:	a8 95       	wdr
   LED_PIN |= _BV(LED);
 #endif
 #endif
 
   return ch;
 }
-    1f16:	29 e0       	ldi	r18, 0x09	; 9
-    1f18:	30 e0       	ldi	r19, 0x00	; 0
-    1f1a:	cb 99       	sbic	0x19, 3	; 25
-    1f1c:	fe cf       	rjmp	.-4      	; 0x1f1a <getch+0x6>
-    1f1e:	0a d0       	rcall	.+20     	; 0x1f34 <uartDelay>
-    1f20:	09 d0       	rcall	.+18     	; 0x1f34 <uartDelay>
-    1f22:	08 d0       	rcall	.+16     	; 0x1f34 <uartDelay>
-    1f24:	88 94       	clc
-    1f26:	cb 99       	sbic	0x19, 3	; 25
-    1f28:	08 94       	sec
-    1f2a:	2a 95       	dec	r18
-    1f2c:	11 f0       	breq	.+4      	; 0x1f32 <getch+0x1e>
-    1f2e:	87 95       	ror	r24
-    1f30:	f7 cf       	rjmp	.-18     	; 0x1f20 <getch+0xc>
-    1f32:	08 95       	ret
-
-00001f34 <uartDelay>:
+ 216:	29 e0       	ldi	r18, 0x09	; 9
+ 218:	30 e0       	ldi	r19, 0x00	; 0
+ 21a:	cb 99       	sbic	0x19, 3	; 25
+ 21c:	fe cf       	rjmp	.-4      	; 0x21a <getch+0x6>
+ 21e:	0a d0       	rcall	.+20     	; 0x234 <uartDelay>
+ 220:	09 d0       	rcall	.+18     	; 0x234 <uartDelay>
+ 222:	08 d0       	rcall	.+16     	; 0x234 <uartDelay>
+ 224:	88 94       	clc
+ 226:	cb 99       	sbic	0x19, 3	; 25
+ 228:	08 94       	sec
+ 22a:	2a 95       	dec	r18
+ 22c:	11 f0       	breq	.+4      	; 0x232 <getch+0x1e>
+ 22e:	87 95       	ror	r24
+ 230:	f7 cf       	rjmp	.-18     	; 0x220 <getch+0xc>
+ 232:	08 95       	ret
+
+00000234 <uartDelay>:
 #if UART_B_VALUE > 255
 #error Baud rate too slow for soft UART
 #endif
 
 void uartDelay() {
   __asm__ __volatile__ (
-    1f34:	9e e0       	ldi	r25, 0x0E	; 14
-    1f36:	9a 95       	dec	r25
-    1f38:	f1 f7       	brne	.-4      	; 0x1f36 <uartDelay+0x2>
-    1f3a:	08 95       	ret
+ 234:	9e e0       	ldi	r25, 0x0E	; 14
+ 236:	9a 95       	dec	r25
+ 238:	f1 f7       	brne	.-4      	; 0x236 <uartDelay+0x2>
+ 23a:	08 95       	ret
 
-00001f3c <getLen>:
+0000023c <getLen>:
   } while (--count);
 }
 #endif
 
 uint8_t getLen() {
   getch();
-    1f3c:	eb df       	rcall	.-42     	; 0x1f14 <getch>
+ 23c:	eb df       	rcall	.-42     	; 0x214 <getch>
   length = getch();
-    1f3e:	ea df       	rcall	.-44     	; 0x1f14 <getch>
-    1f40:	80 93 82 01 	sts	0x0182, r24
+ 23e:	ea df       	rcall	.-44     	; 0x214 <getch>
+ 240:	80 93 82 01 	sts	0x0182, r24
   return getch();
 }
-    1f44:	e7 cf       	rjmp	.-50     	; 0x1f14 <getch>
+ 244:	e7 cf       	rjmp	.-50     	; 0x214 <getch>
 
-00001f46 <watchdogConfig>:
+00000246 <watchdogConfig>:
     "wdr\n"
   );
 }
 
 void watchdogConfig(uint8_t x) {
   WDTCSR = _BV(WDCE) | _BV(WDE);
-    1f46:	98 e1       	ldi	r25, 0x18	; 24
-    1f48:	91 bd       	out	0x21, r25	; 33
+ 246:	98 e1       	ldi	r25, 0x18	; 24
+ 248:	91 bd       	out	0x21, r25	; 33
   WDTCSR = x;
-    1f4a:	81 bd       	out	0x21, r24	; 33
+ 24a:	81 bd       	out	0x21, r24	; 33
 }
-    1f4c:	08 95       	ret
+ 24c:	08 95       	ret
 
-00001f4e <appStart>:
+0000024e <appStart>:
 
 void appStart() {
   watchdogConfig(WATCHDOG_OFF);
-    1f4e:	80 e0       	ldi	r24, 0x00	; 0
-    1f50:	fa df       	rcall	.-12     	; 0x1f46 <watchdogConfig>
+ 24e:	80 e0       	ldi	r24, 0x00	; 0
+ 250:	fa df       	rcall	.-12     	; 0x246 <watchdogConfig>
   __asm__ __volatile__ (
-    1f52:	e4 e0       	ldi	r30, 0x04	; 4
-    1f54:	ff 27       	eor	r31, r31
-    1f56:	09 94       	ijmp
+ 252:	e4 e0       	ldi	r30, 0x04	; 4
+ 254:	ff 27       	eor	r31, r31
+ 256:	09 94       	ijmp
 
-00001f58 <verifySpace>:
+00000258 <verifySpace>:
   do getch(); while (--count);
   verifySpace();
 }
 
 void verifySpace() {
   if (getch() != CRC_EOP) appStart();
-    1f58:	dd df       	rcall	.-70     	; 0x1f14 <getch>
-    1f5a:	80 32       	cpi	r24, 0x20	; 32
-    1f5c:	09 f0       	breq	.+2      	; 0x1f60 <verifySpace+0x8>
-    1f5e:	f7 df       	rcall	.-18     	; 0x1f4e <appStart>
+ 258:	dd df       	rcall	.-70     	; 0x214 <getch>
+ 25a:	80 32       	cpi	r24, 0x20	; 32
+ 25c:	09 f0       	breq	.+2      	; 0x260 <verifySpace+0x8>
+ 25e:	f7 df       	rcall	.-18     	; 0x24e <appStart>
   putch(STK_INSYNC);
-    1f60:	84 e1       	ldi	r24, 0x14	; 20
+ 260:	84 e1       	ldi	r24, 0x14	; 20
 }
-    1f62:	c9 cf       	rjmp	.-110    	; 0x1ef6 <putch>
+ 262:	c9 cf       	rjmp	.-110    	; 0x1f6 <putch>
 
-00001f64 <getNch>:
+00000264 <getNch>:
     ::[count] "M" (UART_B_VALUE)
   );
 }
 #endif
 
 void getNch(uint8_t count) {
-    1f64:	1f 93       	push	r17
-    1f66:	18 2f       	mov	r17, r24
+ 264:	1f 93       	push	r17
+ 266:	18 2f       	mov	r17, r24
   do getch(); while (--count);
-    1f68:	d5 df       	rcall	.-86     	; 0x1f14 <getch>
-    1f6a:	11 50       	subi	r17, 0x01	; 1
-    1f6c:	e9 f7       	brne	.-6      	; 0x1f68 <getNch+0x4>
+ 268:	d5 df       	rcall	.-86     	; 0x214 <getch>
+ 26a:	11 50       	subi	r17, 0x01	; 1
+ 26c:	e9 f7       	brne	.-6      	; 0x268 <getNch+0x4>
   verifySpace();
-    1f6e:	f4 df       	rcall	.-24     	; 0x1f58 <verifySpace>
+ 26e:	f4 df       	rcall	.-24     	; 0x258 <verifySpace>
 }
-    1f70:	1f 91       	pop	r17
-    1f72:	08 95       	ret
+ 270:	1f 91       	pop	r17
+ 272:	08 95       	ret