Add a version number to the optiboot source and binary.

http://code.google.com/p/arduino/issues/detail?id=554

end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip.  (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)

Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)

Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.

Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section.  (This would
need to be done elsewhere as well to handle all bootloader programming
techniques.  Notably Arduino's boards.txt

Note that this change does not change the "code" portion of optiboot
at all.  The only diffs in the .hex files are the added version word
at the end of flash memory.
(cherry picked from commit 00706284dec3171646419839bd4a9e3f1c2d7088)

1 files changed, 13 insertions, 13 deletions

diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile
index 88cb9a2..ce25ac3 100644
--- a/bootloaders/optiboot/Makefile
+++ b/bootloaders/optiboot/Makefile
@@ -36,7 +36,7 @@ ISPPORT	   = usb
 ISPSPEED   = -b 115200
 
 MCU_TARGET = atmega168
-LDSECTION  = --section-start=.text=0x3e00
+LDSECTIONS  = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe
 
 # Build environments
 # Start of some ugly makefile-isms to allow optiboot to be built
@@ -88,7 +88,7 @@ endif
 # http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
 #
 # similarly, the lock bits should be 0xff instead of 0x3f (to
-# unlock the bootloader section) and 0xcf instead of 0x0f (to
+# unlock the bootloader section) and 0xcf instead of 0x2f (to
 # lock it), but since the high two bits of the lock byte are
 # unused, avrdude would get confused.
 
@@ -98,7 +98,7 @@ ISPFUSES    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
               -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
 ISPFLASH    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
               -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
-              -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+              -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m
 
 STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
 STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
@@ -116,7 +116,7 @@ CC         = $(GCCROOT)avr-gcc
 # Override is only needed by avr-lib build system.
 
 override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS       = -Wl,$(LDSECTION) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
+override LDFLAGS       = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
 
 OBJCOPY        = $(GCCROOT)avr-objcopy
 OBJDUMP        = $(call fixpath,$(GCCROOT)avr-objdump)
@@ -129,7 +129,7 @@ virboot328: TARGET = atmega328
 virboot328: MCU_TARGET = atmega328p
 virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT'
 virboot328: AVR_FREQ = 16000000L
-virboot328: LDSECTION  = --section-start=.text=0x7e00
+virboot328: LDSECTIONS  = --section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
 virboot328: $(PROGRAM)_atmega328.hex
 virboot328: $(PROGRAM)_atmega328.lst
 
@@ -200,7 +200,7 @@ atmega328: TARGET = atmega328
 atmega328: MCU_TARGET = atmega328p
 atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
 atmega328: AVR_FREQ = 16000000L
-atmega328: LDSECTION  = --section-start=.text=0x7e00
+atmega328: LDSECTIONS  = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
 atmega328: $(PROGRAM)_atmega328.hex
 atmega328: $(PROGRAM)_atmega328.lst
 
@@ -262,7 +262,7 @@ atmega8: TARGET = atmega8
 atmega8: MCU_TARGET = atmega8
 atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
 atmega8: AVR_FREQ = 16000000L 
-atmega8: LDSECTION  = --section-start=.text=0x1e00
+atmega8: LDSECTIONS  = --section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
 atmega8: $(PROGRAM)_atmega8.hex
 atmega8: $(PROGRAM)_atmega8.lst
 
@@ -281,7 +281,7 @@ atmega88: TARGET = atmega88
 atmega88: MCU_TARGET = atmega88
 atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
 atmega88: AVR_FREQ = 16000000L 
-atmega88: LDSECTION  = --section-start=.text=0x1e00
+atmega88: LDSECTIONS  = --section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
 atmega88: $(PROGRAM)_atmega88.hex
 atmega88: $(PROGRAM)_atmega88.lst
 
@@ -357,7 +357,7 @@ atmega328_pro8: TARGET = atmega328_pro_8MHz
 atmega328_pro8: MCU_TARGET = atmega328p
 atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
 atmega328_pro8: AVR_FREQ = 8000000L
-atmega328_pro8: LDSECTION  = --section-start=.text=0x7e00
+atmega328_pro8: LDSECTIONS = --section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
 atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
 atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
 
@@ -382,7 +382,7 @@ luminet: MCU_TARGET = attiny84
 luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
 luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
 luminet: AVR_FREQ = 1000000L
-luminet: LDSECTION  = --section-start=.text=0x1d00
+luminet: LDSECTIONS = --section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe
 luminet: $(PROGRAM)_luminet.hex
 luminet: $(PROGRAM)_luminet.lst
 
@@ -421,10 +421,10 @@ clean:
 	$(OBJDUMP) -h -S $< > $@
 
 %.hex: %.elf
-	$(OBJCOPY) -j .text -j .data -O ihex $< $@
+	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@
 
 %.srec: %.elf
-	$(OBJCOPY) -j .text -j .data -O srec $< $@
+	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@
 
 %.bin: %.elf
-	$(OBJCOPY) -j .text -j .data -O binary $< $@
+	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@