Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

1 files changed, 0 insertions, 450 deletions

diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile
deleted file mode 100644
index f8d137d..0000000
--- a/bootloaders/optiboot/Makefile
+++ /dev/null
@@ -1,450 +0,0 @@
-# Makefile for ATmegaBOOT
-# E.Lins, 18.7.2005
-#
-# Instructions
-#
-# To make bootloader .hex file:
-# make diecimila
-# make lilypad
-# make ng
-# etc...
-#
-# To burn bootloader .hex file:
-# make diecimila_isp
-# make lilypad_isp
-# make ng_isp
-# etc...
-
-# program name should not be changed...
-PROGRAM    = optiboot
-
-# The default behavior is to build using tools that are in the users
-# current path variables, but we can also build using an installed
-# Arduino user IDE setup, or the Arduino source tree.
-# Uncomment this next lines to build within the arduino environment,
-# using the arduino-included avrgcc toolset (mac and pc)
-# ENV ?= arduino
-# ENV ?= arduinodev
-# OS ?= macosx
-# OS ?= windows
-
-
-# enter the parameters for the avrdude isp tool
-ISPTOOL	   = stk500v2
-ISPPORT	   = usb
-ISPSPEED   = -b 115200
-
-MCU_TARGET = atmega168
-LDSECTIONS  = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe
-
-# Build environments
-# Start of some ugly makefile-isms to allow optiboot to be built
-# in several different environments.  See the README.TXT file for
-# details.
-
-# default
-fixpath = $(1)
-
-ifeq ($(ENV), arduino)
-# For Arduino, we assume that we're connected to the optiboot directory
-# included with the arduino distribution, which means that the full set
-# of avr-tools are "right up there" in standard places.
-TOOLROOT = ../../../tools
-GCCROOT = $(TOOLROOT)/avr/bin/
-AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
-
-ifeq ($(OS), windows)
-# On windows, SOME of the tool paths will need to have backslashes instead
-# of forward slashes (because they use windows cmd.exe for execution instead
-# of a unix/mingw shell?)  We also have to ensure that a consistent shell
-# is used even if a unix shell is installed (ie as part of WINAVR)
-fixpath = $(subst /,\,$1)
-SHELL = cmd.exe
-endif
-
-else ifeq ($(ENV), arduinodev)
-# Arduino IDE source code environment.  Use the unpacked compilers created
-# by the build (you'll need to do "ant build" first.)
-ifeq ($(OS), macosx)
-TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools
-endif
-ifeq ($(OS), windows)
-TOOLROOT = ../../../../build/windows/work/hardware/tools
-endif
-
-GCCROOT = $(TOOLROOT)/avr/bin/
-AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
-
-else
-GCCROOT =
-AVRDUDE_CONF =
-endif
-#
-# End of build environment code.
-
-
-# the efuse should really be 0xf8; since, however, only the lower
-# three bits of that byte are used on the atmega168, avrdude gets
-# confused if you specify 1's for the higher bits, see:
-# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
-#
-# similarly, the lock bits should be 0xff instead of 0x3f (to
-# unlock the bootloader section) and 0xcf instead of 0x2f (to
-# lock it), but since the high two bits of the lock byte are
-# unused, avrdude would get confused.
-
-ISPFUSES    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
-              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
-              -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \
-              -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
-ISPFLASH    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
-              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
-              -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m
-
-STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
-STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
--lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
-STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
-
-OBJ        = $(PROGRAM).o
-OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
-
-DEFS       = 
-LIBS       =
-
-CC         = $(GCCROOT)avr-gcc
-
-# Override is only needed by avr-lib build system.
-
-override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS       = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
-
-OBJCOPY        = $(GCCROOT)avr-objcopy
-OBJDUMP        = $(call fixpath,$(GCCROOT)avr-objdump)
-
-SIZE           = $(GCCROOT)avr-size
-
-# Test platforms
-# Virtual boot block test
-virboot328: TARGET = atmega328
-virboot328: MCU_TARGET = atmega328p
-virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT'
-virboot328: AVR_FREQ = 16000000L
-virboot328: LDSECTIONS  = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
-virboot328: $(PROGRAM)_atmega328.hex
-virboot328: $(PROGRAM)_atmega328.lst
-
-# 20MHz clocked platforms
-#
-# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
-#
-
-pro20: TARGET = pro_20mhz
-pro20: MCU_TARGET = atmega168
-pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-pro20: AVR_FREQ = 20000000L
-pro20: $(PROGRAM)_pro_20mhz.hex
-pro20: $(PROGRAM)_pro_20mhz.lst
-
-pro20_isp: pro20
-pro20_isp: TARGET = pro_20mhz
-# 2.7V brownout
-pro20_isp: HFUSE = DD
-# Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro20_isp: LFUSE = C6
-# 512 byte boot
-pro20_isp: EFUSE = 04
-pro20_isp: isp
-
-# 16MHz clocked platforms
-#
-# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
-#
-
-pro16: TARGET = pro_16MHz
-pro16: MCU_TARGET = atmega168
-pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-pro16: AVR_FREQ = 16000000L
-pro16: $(PROGRAM)_pro_16MHz.hex
-pro16: $(PROGRAM)_pro_16MHz.lst
-
-pro16_isp: pro16
-pro16_isp: TARGET = pro_16MHz
-# 2.7V brownout
-pro16_isp: HFUSE = DD
-# Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro16_isp: LFUSE = C6
-# 512 byte boot
-pro16_isp: EFUSE = 04
-pro16_isp: isp
-
-# Diecimila, Duemilanove with m168, and NG use identical bootloaders
-# Call it "atmega168" for generality and clarity, keep "diecimila" for
-# backward compatibility of makefile
-#
-atmega168: TARGET = atmega168
-atmega168: MCU_TARGET = atmega168
-atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-atmega168: AVR_FREQ = 16000000L 
-atmega168: $(PROGRAM)_atmega168.hex
-atmega168: $(PROGRAM)_atmega168.lst
-
-atmega168_isp: atmega168
-atmega168_isp: TARGET = atmega168
-# 2.7V brownout
-atmega168_isp: HFUSE = DD
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega168_isp: LFUSE = FF
-# 512 byte boot
-atmega168_isp: EFUSE = 04
-atmega168_isp: isp
-
-diecimila: TARGET = diecimila
-diecimila: MCU_TARGET = atmega168
-diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-diecimila: AVR_FREQ = 16000000L 
-diecimila: $(PROGRAM)_diecimila.hex
-diecimila: $(PROGRAM)_diecimila.lst
-
-diecimila_isp: diecimila
-diecimila_isp: TARGET = diecimila
-# 2.7V brownout
-diecimila_isp: HFUSE = DD
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-diecimila_isp: LFUSE = FF
-# 512 byte boot
-diecimila_isp: EFUSE = 04
-diecimila_isp: isp
-
-atmega328: TARGET = atmega328
-atmega328: MCU_TARGET = atmega328p
-atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-atmega328: AVR_FREQ = 16000000L
-atmega328: LDSECTIONS  = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
-atmega328: $(PROGRAM)_atmega328.hex
-atmega328: $(PROGRAM)_atmega328.lst
-
-atmega328_isp: atmega328
-atmega328_isp: TARGET = atmega328
-atmega328_isp: MCU_TARGET = atmega328p
-# 512 byte boot, SPIEN
-atmega328_isp: HFUSE = DE
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega328_isp: LFUSE = FF
-# 2.7V brownout
-atmega328_isp: EFUSE = 05
-atmega328_isp: isp
-
-# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions
-#
-sanguino: TARGET = atmega644p
-sanguino: MCU_TARGET = atmega644p
-sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
-sanguino: AVR_FREQ = 16000000L
-sanguino: LDSECTIONS  = -Wl,--section-start=.text=0xfc00
-sanguino: $(PROGRAM)_atmega644p.hex
-sanguino: $(PROGRAM)_atmega644p.lst
-
-sanguino_isp: sanguino
-sanguino_isp: TARGET = atmega644p
-sanguino_isp: MCU_TARGET = atmega644p
-# 1024 byte boot
-sanguino_isp: HFUSE = DE
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-sanguino_isp: LFUSE = FF
-# 2.7V brownout
-sanguino_isp: EFUSE = 05
-sanguino_isp: isp
-
-# Mega has a minimum boot size of 1024 bytes, so enable extra functions
-#mega: TARGET = atmega1280
-mega: MCU_TARGET = atmega1280
-mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
-mega: AVR_FREQ = 16000000L
-mega: LDSECTIONS  = -Wl,--section-start=.text=0x1fc00
-mega: $(PROGRAM)_atmega1280.hex
-mega: $(PROGRAM)_atmega1280.lst
-
-mega_isp: mega
-mega_isp: TARGET = atmega1280
-mega_isp: MCU_TARGET = atmega1280
-# 1024 byte boot
-mega_isp: HFUSE = DE
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-mega_isp: LFUSE = FF
-# 2.7V brownout
-mega_isp: EFUSE = 05
-mega_isp: isp
-
-# ATmega8
-#
-atmega8: TARGET = atmega8
-atmega8: MCU_TARGET = atmega8
-atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-atmega8: AVR_FREQ = 16000000L 
-atmega8: LDSECTIONS  = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
-atmega8: $(PROGRAM)_atmega8.hex
-atmega8: $(PROGRAM)_atmega8.lst
-
-atmega8_isp: atmega8
-atmega8_isp: TARGET = atmega8
-atmega8_isp: MCU_TARGET = atmega8
-# SPIEN, CKOPT, Bootsize=512B
-atmega8_isp: HFUSE = CC
-# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega8_isp: LFUSE = BF
-atmega8_isp: isp
-
-# ATmega88
-#
-atmega88: TARGET = atmega88
-atmega88: MCU_TARGET = atmega88
-atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-atmega88: AVR_FREQ = 16000000L 
-atmega88: LDSECTIONS  = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
-atmega88: $(PROGRAM)_atmega88.hex
-atmega88: $(PROGRAM)_atmega88.lst
-
-atmega88_isp: atmega88
-atmega88_isp: TARGET = atmega88
-atmega88_isp: MCU_TARGET = atmega88
-# 2.7V brownout
-atmega88_isp: HFUSE = DD
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-atemga88_isp: LFUSE = FF
-# 512 byte boot
-atmega88_isp: EFUSE = 04
-atmega88_isp: isp
-
-
-# 8MHz clocked platforms
-#
-# These are capable of 115200 baud
-#
-
-lilypad: TARGET = lilypad
-lilypad: MCU_TARGET = atmega168
-lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-lilypad: AVR_FREQ = 8000000L
-lilypad: $(PROGRAM)_lilypad.hex
-lilypad: $(PROGRAM)_lilypad.lst
-
-lilypad_isp: lilypad
-lilypad_isp: TARGET = lilypad
-# 2.7V brownout
-lilypad_isp: HFUSE = DD
-# Internal 8MHz osc (8MHz) Slow rising power
-lilypad_isp: LFUSE = E2
-# 512 byte boot
-lilypad_isp: EFUSE = 04
-lilypad_isp: isp
-
-lilypad_resonator: TARGET = lilypad_resonator
-lilypad_resonator: MCU_TARGET = atmega168
-lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-lilypad_resonator: AVR_FREQ = 8000000L
-lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
-lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst
-
-lilypad_resonator_isp: lilypad_resonator
-lilypad_resonator_isp: TARGET = lilypad_resonator
-# 2.7V brownout
-lilypad_resonator_isp: HFUSE = DD
-# Full swing xtal (20MHz) 258CK/14CK+4.1ms
-lilypad_resonator_isp: LFUSE = C6
-# 512 byte boot
-lilypad_resonator_isp: EFUSE = 04
-lilypad_resonator_isp: isp
-
-pro8: TARGET = pro_8MHz
-pro8: MCU_TARGET = atmega168
-pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-pro8: AVR_FREQ = 8000000L
-pro8: $(PROGRAM)_pro_8MHz.hex
-pro8: $(PROGRAM)_pro_8MHz.lst
-
-pro8_isp: pro8
-pro8_isp: TARGET = pro_8MHz
-# 2.7V brownout
-pro8_isp: HFUSE = DD
-# Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro8_isp: LFUSE = C6
-# 512 byte boot
-pro8_isp: EFUSE = 04
-pro8_isp: isp
-
-atmega328_pro8: TARGET = atmega328_pro_8MHz
-atmega328_pro8: MCU_TARGET = atmega328p
-atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
-atmega328_pro8: AVR_FREQ = 8000000L
-atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
-atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
-atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
-
-atmega328_pro8_isp: atmega328_pro8
-atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
-atmega328_pro8_isp: MCU_TARGET = atmega328p
-# 512 byte boot, SPIEN
-atmega328_pro8_isp: HFUSE = DE
-# Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega328_pro8_isp: LFUSE = FF
-# 2.7V brownout
-atmega328_pro8_isp: EFUSE = 05
-atmega328_pro8_isp: isp
-
-# 1MHz clocked platforms
-#
-# These are capable of 9600 baud
-#
-
-luminet: TARGET = luminet
-luminet: MCU_TARGET = attiny84
-luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
-luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
-luminet: AVR_FREQ = 1000000L
-luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe
-luminet: $(PROGRAM)_luminet.hex
-luminet: $(PROGRAM)_luminet.lst
-
-luminet_isp: luminet
-luminet_isp: TARGET = luminet
-luminet_isp: MCU_TARGET = attiny84
-# Brownout disabled
-luminet_isp: HFUSE = DF
-# 1MHz internal oscillator, slowly rising power
-luminet_isp: LFUSE = 62
-# Self-programming enable
-luminet_isp: EFUSE = FE
-luminet_isp: isp
-
-#
-# Generic build instructions
-#
-#
-
-isp: $(TARGET)
-	$(ISPFUSES)
-	$(ISPFLASH)
-
-isp-stk500: $(PROGRAM)_$(TARGET).hex
-	$(STK500-1)
-	$(STK500-2)
-
-%.elf: $(OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
-	$(SIZE) $@
-
-clean:
-	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
-
-%.lst: %.elf
-	$(OBJDUMP) -h -S $< > $@
-
-%.hex: %.elf
-	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@
-
-%.srec: %.elf
-	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@
-
-%.bin: %.elf
-	$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@