Adding LilyPad bootloader and adding LilyPad to board definition file.

1 files changed, 84 insertions, 0 deletions

diff --git a/bootloaders/lilypad/src/Makefile b/bootloaders/lilypad/src/Makefile
new file mode 100644
index 0000000..516d5b2
--- /dev/null
+++ b/bootloaders/lilypad/src/Makefile
@@ -0,0 +1,84 @@
+# Makefile for ATmegaBOOT
+# E.Lins, 18.7.2005
+# $Id$
+
+# Instructions
+#
+# To build the bootloader for the LilyPad:
+# make lily
+
+
+# program name should not be changed...
+PROGRAM    = ATmegaBOOT_168
+
+# enter the target CPU frequency
+AVR_FREQ   = 8000000L
+
+# enter the parameters for the avrdude isp tool
+ISPTOOL	   = stk500v2
+ISPPORT	   = usb
+ISPSPEED   = -b 115200
+
+MCU_TARGET = atmega168
+LDSECTION  = --section-start=.text=0x3800
+
+# the efuse should really be 0xf8; since, however, only the lower
+# three bits of that byte are used on the atmega168, avrdude gets
+# confused if you specify 1's for the higher bits, see:
+# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
+#
+# similarly, the lock bits should be 0xff instead of 0x3f (to
+# unlock the bootloader section) and 0xcf instead of 0x0f (to
+# lock it), but since the high two bits of the lock byte are
+# unused, avrdude would get confused.
+ISPFUSES    = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xff:m
+ISPFLASH    = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+
+
+OBJ        = $(PROGRAM).o
+OPTIMIZE   = -O2
+
+DEFS       = 
+LIBS       =
+
+CC         = avr-gcc
+
+
+# Override is only needed by avr-lib build system.
+
+override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
+override LDFLAGS       = -Wl,$(LDSECTION)
+#override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
+
+OBJCOPY        = avr-objcopy
+OBJDUMP        = avr-objdump
+
+all:
+
+lily: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
+lily: $(PROGRAM).hex
+
+$(PROGRAM).hex: $(PROGRAM).elf
+	$(OBJCOPY) -j .text -j .data -O ihex $< $@
+	
+$(PROGRAM).elf: $(OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+	
+$(OBJ): 
+	avr-gcc $(CFLAGS) $(LDFLAGS) -c -g -O2 -Wall -mmcu=atmega168 ATmegaBOOT.c -o ATmegaBOOT_168.o
+
+%.lst: %.elf
+	$(OBJDUMP) -h -S $< > $@
+
+%.srec: %.elf
+	$(OBJCOPY) -j .text -j .data -O srec $< $@
+
+%.bin: %.elf
+	$(OBJCOPY) -j .text -j .data -O binary $< $@
+
+clean:
+	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
+	
+install:
+	avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m 
+	avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex  -U lock:w:0x0f:m