Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

1 files changed, 0 insertions, 83 deletions

diff --git a/bootloaders/lilypad/src/Makefile b/bootloaders/lilypad/src/Makefile
deleted file mode 100644
index 394a88a..0000000
--- a/bootloaders/lilypad/src/Makefile
+++ /dev/null
@@ -1,83 +0,0 @@
-# Makefile for ATmegaBOOT
-# E.Lins, 18.7.2005
-
-# Instructions
-#
-# To build the bootloader for the LilyPad:
-# make lily
-
-
-# program name should not be changed...
-PROGRAM    = ATmegaBOOT_168
-
-# enter the target CPU frequency
-AVR_FREQ   = 8000000L
-
-# enter the parameters for the avrdude isp tool
-ISPTOOL	   = stk500v2
-ISPPORT	   = usb
-ISPSPEED   = -b 115200
-
-MCU_TARGET = atmega168
-LDSECTION  = --section-start=.text=0x3800
-
-# the efuse should really be 0xf8; since, however, only the lower
-# three bits of that byte are used on the atmega168, avrdude gets
-# confused if you specify 1's for the higher bits, see:
-# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
-#
-# similarly, the lock bits should be 0xff instead of 0x3f (to
-# unlock the bootloader section) and 0xcf instead of 0x0f (to
-# lock it), but since the high two bits of the lock byte are
-# unused, avrdude would get confused.
-ISPFUSES    = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xff:m
-ISPFLASH    = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
-
-
-OBJ        = $(PROGRAM).o
-OPTIMIZE   = -O2
-
-DEFS       = 
-LIBS       =
-
-CC         = avr-gcc
-
-
-# Override is only needed by avr-lib build system.
-
-override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS       = -Wl,$(LDSECTION)
-#override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
-
-OBJCOPY        = avr-objcopy
-OBJDUMP        = avr-objdump
-
-all:
-
-lily: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
-lily: $(PROGRAM).hex
-
-$(PROGRAM).hex: $(PROGRAM).elf
-	$(OBJCOPY) -j .text -j .data -O ihex $< $@
-	
-$(PROGRAM).elf: $(OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
-	
-$(OBJ): 
-	avr-gcc $(CFLAGS) $(LDFLAGS) -c -g -O2 -Wall -mmcu=atmega168 ATmegaBOOT.c -o ATmegaBOOT_168.o
-
-%.lst: %.elf
-	$(OBJDUMP) -h -S $< > $@
-
-%.srec: %.elf
-	$(OBJCOPY) -j .text -j .data -O srec $< $@
-
-%.bin: %.elf
-	$(OBJCOPY) -j .text -j .data -O binary $< $@
-
-clean:
-	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
-	
-install:
-	avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m 
-	avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex  -U lock:w:0x0f:m