superficial changes to stock LUFA CDC bootloader - renamed project, removed unnecessary files

1 files changed, 0 insertions, 119 deletions

diff --git a/bootloaders/caterina_LUFA/BootloaderCDC.txt b/bootloaders/caterina_LUFA/BootloaderCDC.txt
deleted file mode 100755
index c9aff82..0000000
--- a/bootloaders/caterina_LUFA/BootloaderCDC.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage CDC Class USB AVR Bootloader

- *

- *  \section Sec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs (AT90USBxxx7)

- *  - Series 6 USB AVRs (AT90USBxxx6)

- *  - Series 4 USB AVRs (ATMEGAxxU4)

- *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Communications Device Class (CDC)</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Abstract Control Model (ACM)</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF CDC Class Standard</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109

- *  protocol compatible programming software to load firmware onto the AVR.

- *

- *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If

- *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU

- *  values in the accompanying makefile.

- *

- *  When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the

- *  bootloader from the normal user application.

- *

- *  \section Sec_Installation Driver Installation

- *

- *  After running this bootloader for the first time on a new computer, you will need to supply the .INF

- *  file located in this bootloader project's directory as the device's driver when running under Windows.

- *  This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the

- *  device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.

- *

- *  \section Sec_HostApp Host Controller Application

- *

- *  This bootloader is compatible with the open source application AVRDUDE, Atmel's AVRPROG, or other

- *  applications implementing the AVR109 protocol, which is documented on the Atmel website as an application

- *  note.

- *

- *  \subsection SSec_AVRDude AVRDUDE (Windows, Mac, Linux)

- *

- *  AVRDude is a free, cross-platform and open source command line programmer for Atmel and third party AVR

- *  programmers. It is available on the the Windows platform as part of the "WinAVR" package, or on other systems

- *  either from a build from the official source code, or in many distributions as a precompiled binary package.

- *

- *  To load a new HEX file with AVRDude, specify "AVR109" as the programmer, with the allocated COM port. On Windows

- *  platforms this will be a COMx port name:

- *  \code

- *  avrdude -c AVR109 -p at90usb1287 -P COM0 -U flash:w:Mouse.hex

- *  \endcode

- *

- *  On Linux systems, this will typically be a /dev/ttyACMx port name:

- *  \code

- *  avrdude -c AVR109 -p at90usb1287 -P /dev/ttyACM0 -U flash:w:Mouse.hex

- *  \endcode

- *

- *  Refer to the AVRDude project documentation for additional usage instructions.

- *

- *  \section Sec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td>NO_BLOCK_SUPPORT</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made

- *        using the byte-level commands.</td>

- *   </tr>

- *   <tr>

- *    <td>NO_EEPROM_BYTE_SUPPORT</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes

- *        to be made using the block-level commands.</td>

- *   </tr>

- *   <tr>

- *    <td>NO_FLASH_BYTE_SUPPORT</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes

- *        to be made using the block-level commands.</td>

- *   </tr>

- *   <tr>

- *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>

- *   </tr>

- *  </table>

- */

-