Adding Tom's examples for the new LiquidCrystal library.

9 files changed, 559 insertions, 0 deletions

diff --git a/libraries/LiquidCrystal/examples/Blink/Blink.pde b/libraries/LiquidCrystal/examples/Blink/Blink.pde
new file mode 100644
index 0000000..f189fd9
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Blink/Blink.pde
@@ -0,0 +1,56 @@
+/*
+  LiquidCrystal Library - Blink
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD and makes the 
+ cursor block blink.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+   * ends to +5V and ground
+   * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ 
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // Turn off the display:
+  lcd.noBlink();
+  delay(500);
+  // Turn on the display:
+  lcd.blink();
+  delay(500);
+}
+
+
diff --git a/libraries/LiquidCrystal/examples/Cursor/Cursor.pde b/libraries/LiquidCrystal/examples/Cursor/Cursor.pde
new file mode 100644
index 0000000..e28c719
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Cursor/Cursor.pde
@@ -0,0 +1,55 @@
+/*
+  LiquidCrystal Library - Cursor
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD and
+ uses the cursor()  and noCursor() methods to turn
+ on and off the cursor.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // Turn off the display:
+  lcd.noCursor();
+  delay(500);
+   // Turn on the display:
+  lcd.cursor();
+  delay(500);
+}
+
diff --git a/libraries/LiquidCrystal/examples/Display/Display.pde b/libraries/LiquidCrystal/examples/Display/Display.pde
new file mode 100644
index 0000000..2ccf1cb
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Display/Display.pde
@@ -0,0 +1,55 @@
+/*
+  LiquidCrystal Library - display() and noDisplay()
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD and uses the 
+ display() and noDisplay() functions to turn on and off
+ the display.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // Turn off the display:
+  lcd.noDisplay();
+  delay(500);
+   // Turn on the display:
+  lcd.display();
+  delay(500);
+}
+
diff --git a/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde b/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde
new file mode 100644
index 0000000..9909349
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde
@@ -0,0 +1,53 @@
+/*
+  LiquidCrystal Library - Hello World
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD
+ and shows the time.
+ 
+  The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // set the cursor to column 0, line 1
+  // (note: line 1 is the second row, since counting begins with 0):
+  lcd.setCursor(0, 1);
+  // print the number of seconds since reset:
+  lcd.print(millis()/1000);
+}
+
diff --git a/libraries/LiquidCrystal/examples/IncrementDecrement/IncrementDecrement.pde b/libraries/LiquidCrystal/examples/IncrementDecrement/IncrementDecrement.pde
new file mode 100644
index 0000000..32ce4dc
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/IncrementDecrement/IncrementDecrement.pde
@@ -0,0 +1,67 @@
+/*
+  LiquidCrystal Library - Increment/Decrement
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch demonstrates the use of the shiftIncrement()
+ and shifDecrement() functions.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+}
+
+void loop() {
+     // set the cursor to (0,0):
+  lcd.setCursor(0, 0);
+  // set the display to left justify:
+  lcd.shiftDecrement();
+  // print from 0 to 9:
+  for (int thisChar = 0; thisChar < 10; thisChar++) {
+   lcd.print(thisChar);
+   delay(500);
+  }
+  // set the cursor to (16,0):
+  lcd.setCursor(16,1);
+  // set the display to left justify:
+  lcd.shiftIncrement();
+  // print from 0 to 9:
+  for (int thisChar = 0; thisChar < 10; thisChar++) {
+    lcd.print(thisChar);
+    delay(500);
+  }
+  
+  // clear screen for the next loop:
+  lcd.clear();
+}
+
diff --git a/libraries/LiquidCrystal/examples/Scroll/Scroll.pde b/libraries/LiquidCrystal/examples/Scroll/Scroll.pde
new file mode 100644
index 0000000..4556a38
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Scroll/Scroll.pde
@@ -0,0 +1,65 @@
+/*
+  LiquidCrystal Library - scrollDisplayLeft() and scrollDisplayRight()
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD and uses the
+ scrollDisplayLeft() and scrollDisplayRight() methods to scroll
+ the text.
+ 
+  The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  lcd.setCursor(0,7);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // scroll 27 positions (display length + string length) to the left:
+  for (int positionCounter = 0; positionCounter < 27; positionCounter++) {
+    // scroll one position left:
+    lcd.scrollDisplayLeft(); 
+    // wait a bit:
+    delay(200);
+  }
+
+  // scroll 27 positions (display length + string length) to the right:
+  for (int positionCounter = 0; positionCounter < 27; positionCounter++) {
+    // scroll one position right:
+    lcd.scrollDisplayRight(); 
+    // wait a bit:
+    delay(200);
+  }
+}
+
diff --git a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde
new file mode 100644
index 0000000..559ec59
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde
@@ -0,0 +1,60 @@
+/*
+  LiquidCrystal Library - Serial Input
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch displays text sent over the serial port 
+ (e.g. from the Serial Monitor) on an attached LCD.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup(){
+    // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // initialize the serial communications:
+  Serial.begin(9600);
+}
+
+void loop()
+{
+  // when characters arrive over the serial port...
+  if (Serial.available()) {
+    // wait a bit for the entire message to arrive
+    delay(100);
+    // clear the screen
+    lcd.clear();
+    // read all the available characters
+    while (Serial.available() > 0) {
+      // display each character to the LCD
+      lcd.write(Serial.read());
+    }
+  }
+}
diff --git a/libraries/LiquidCrystal/examples/Shift/Shift.pde b/libraries/LiquidCrystal/examples/Shift/Shift.pde
new file mode 100644
index 0000000..0326c51
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Shift/Shift.pde
@@ -0,0 +1,82 @@
+  /*
+  LiquidCrystal Library - Shift
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch demonstrates how to use shiftLeft() and shiftRight()
+ to move the cursor.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ 
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+int thisChar = 'a';
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(2, 16);
+  // turn on the cursor:
+  lcd.cursor();
+  Serial.begin(9600);
+}
+
+void loop() {
+  // reverse directions at 'm':
+  if (thisChar == 'm') {
+    // go right for the next letter
+    lcd.shiftRight(); 
+  }
+  // reverse again at 's':
+  if (thisChar == 's') {
+    // go left for the next letter
+    lcd.shiftLeft(); 
+  }
+  // reset at 'z':
+  if (thisChar > 'z') {
+    // go to (0,0):
+    lcd.home(); 
+    // start again at 0
+    thisChar = 'a';
+  }
+  // print the character
+  lcd.print(thisChar, BYTE);
+  // wait a second:
+  delay(1000);
+  // increment the letter:
+  thisChar++;
+}
+
+
+
+
+
+
+
+
diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
new file mode 100644
index 0000000..01e599e
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
@@ -0,0 +1,66 @@
+/*
+  LiquidCrystal Library - setCursor
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints to all the positions of the LCD using the
+ setCursor(0 method:
+ 
+  The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// these constants won't change.  But you can change the size of
+// your LCD using them:
+const int numRows = 2;
+const int numCols = 16;
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(numRows, numCols);
+}
+
+void loop() {
+  // loop from ASCII 'a' to ASCII 'z':
+  for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) {
+    // loop over the columns:
+    for (int thisCol = 0; thisCol < numRows; thisCol++) {
+      // loop over the rows:
+      for (int thisRow = 0; thisRow < numCols; thisRow++) {
+        // set the cursor position:
+        lcd.setCursor(thisRow,thisCol);
+        // print the letter:
+        lcd.print(thisLetter, BYTE);
+        delay(200);
+      }
+    }
+  }
+}
+
+