blob: 5412631f643e1fdd05900db01029d79ddf933cbd (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
|
/*
SD card datalogger
This example shows how to log data from three analog sensors
to an SD card mounted on the Linux using the Bridge library.
The circuit:
* analog sensors on analog ins 0, 1, and 2
* SD card attached to SD card slot of the Arduino Yun
You are allowed to remove the SD card while the Linux and the
sketch is running but becareful to don't remove it while
the system is writing on it.
created 24 Nov 2010
modified 9 Apr 2012
by Tom Igoe
adapted to the Yun Bridge library 20 Jun 2013
by Federico Vanzati
This example code is in the public domain.
*/
#include <FileIO.h>
#include <Console.h>
void setup() {
// Initialize the Bridge and the Console
Bridge.begin();
Console.begin();
while(!Console){
; // wait for Console port to connect.
}
// see if the card is present and can be initialized:
if (!SD.begin()) {
Console.println("SD card failed, or not present");
// don't do anything more:
return;
}
Console.println("SD card initialized.");
}
void loop () {
// make a string that start with a timestamp for assembling the data to log:
String dataString = "";
addTimeStamp(dataString);
dataString += " = ";
// read three sensors and append to the string:
for (int analogPin = 0; analogPin < 3; analogPin++) {
int sensor = analogRead(analogPin);
dataString += String(sensor);
if (analogPin < 2) {
dataString += ",";
}
}
// open the file. note that only one file can be open at a time,
// so you have to close this one before opening another.
// The SD card is mounted at the following "/mnt/sda1"
File dataFile = SD.open("/mnt/sda1/datalog.txt", FILE_APPEND);
// if the file is available, write to it:
if (dataFile) {
dataFile.println(dataString);
dataFile.close();
// print to the serial port too:
Console.println(dataString);
}
// if the file isn't open, pop up an error:
else {
Console.println("error opening datalog.txt");
}
delay(15000);
}
// This function append a time stamp to the string passed as argument
void addTimeStamp(String &string) {
Process time;
time.begin("date");
time.addParameter("+%D-%T");
time.run();
while(time.available()>0) {
char c = time.read();
if(c != '\n')
string += c;
}
}
|
