/* * @file type.h * */ #ifndef _TYPE_H_ #define _TYPE_H_ /*************************************************** * attribute for mcu ( types, ... ) ***************************************************/ //#include "mcu_define.h" #define __MCU_AVR__ 1 #define __MCU_TYPE__ __MCU_AVR__ //---- Refer "Rom File Maker Manual Vx.x.pdf" #include #define _ENDIAN_LITTLE_ 0 /**< This must be defined if system is little-endian alignment */ #define _ENDIAN_BIG_ 1 #define SYSTEM_ENDIAN _ENDIAN_LITTLE_ #define MAX_SOCK_NUM 4 /**< Maxmium number of socket */ #define CLK_CPU F_CPU /**< 8Mhz(for serial) */ /* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/ //#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */ //#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */ //#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */ /* If it is defined, the source files(md5.h,md5.c) must be included in your project. Otherwize, the source files must be removed in your project. */ #define __DEF_IINCHIP_DIRECT_MODE__ 1 #define __DEF_IINCHIP_INDIRECT_MODE__ 2 #define __DEF_IINCHIP_SPI_MODE__ 3 //#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__ //#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__ #define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/ /** @brief __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip */ #define __DEF_IINCHIP_MAP_BASE__ 0x8000 #if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__ #else #define COMMON_BASE 0x0000 #endif #define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */ #define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */ #if (__MCU_TYPE__ == __MCU_AVR__) #ifdef __DEF_IINCHIP_INT__ // iinchip use external interrupt 4 #define IINCHIP_ISR_DISABLE() (EIMSK &= ~(0x10)) #define IINCHIP_ISR_ENABLE() (EIMSK |= 0x10) #define IINCHIP_ISR_GET(X) (X = EIMSK) #define IINCHIP_ISR_SET(X) (EIMSK = X) #else #define IINCHIP_ISR_DISABLE() #define IINCHIP_ISR_ENABLE() #define IINCHIP_ISR_GET(X) #define IINCHIP_ISR_SET(X) #endif #else #error "unknown MCU type" #endif #ifndef NULL #define NULL ((void *) 0) #endif //typedef enum { false, true } bool; #ifndef _SIZE_T #define _SIZE_T typedef unsigned int size_t; #endif /** * The 8-bit signed data type. */ typedef char int8; /** * The volatile 8-bit signed data type. */ typedef volatile char vint8; /** * The 8-bit unsigned data type. */ typedef unsigned char uint8; /** * The volatile 8-bit unsigned data type. */ typedef volatile unsigned char vuint8; /** * The 16-bit signed data type. */ typedef int int16; /** * The volatile 16-bit signed data type. */ typedef volatile int vint16; /** * The 16-bit unsigned data type. */ typedef unsigned int uint16; /** * The volatile 16-bit unsigned data type. */ typedef volatile unsigned int vuint16; /** * The 32-bit signed data type. */ typedef long int32; /** * The volatile 32-bit signed data type. */ typedef volatile long vint32; /** * The 32-bit unsigned data type. */ typedef unsigned long uint32; /** * The volatile 32-bit unsigned data type. */ typedef volatile unsigned long vuint32; /* bsd */ typedef uint8 u_char; /**< 8-bit value */ typedef uint8 SOCKET; typedef uint16 u_short; /**< 16-bit value */ typedef uint16 u_int; /**< 16-bit value */ typedef uint32 u_long; /**< 32-bit value */ typedef union _un_l2cval { u_long lVal; u_char cVal[4]; }un_l2cval; typedef union _un_i2cval { u_int iVal; u_char cVal[2]; }un_i2cval; /** global define */ #define FW_VERSION 0x01010000 /* System F/W Version : 1.1.0.0 */ #define HW_VERSION 0x01000000 #define TX_RX_MAX_BUF_SIZE 2048 #define TX_BUF 0x1100 #define RX_BUF (TX_BUF+TX_RX_MAX_BUF_SIZE) #define UART_DEVICE_CNT 1 /**< UART device number */ /* #define SUPPORT_UART_ONE */ #endif /* _TYPE_H_ */