/*
*
@file		socket.c
@brief	setting chip register for socket
		last update : 2008. Jan
*
*/

#include "types.h"
#include "w5100.h"
#include "socket.h"

static uint16 local_port;


/**
@brief	This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it.
@return 	1 for sucess else 0.
*/  
uint8 socket(
	SOCKET s, 		/**< for socket number */
	uint8 protocol, 	/**< for socket protocol */
	uint16 port, 		/**< the source port for the socket */
	uint8 flag		/**< the option for the socket */
	)
{
	uint8 ret;
#ifdef __DEF_IINCHIP_DBG__
	printf("socket()\r\n");
#endif
	if ((protocol == Sn_MR_TCP) || (protocol == Sn_MR_UDP) || (protocol == Sn_MR_IPRAW) || (protocol == Sn_MR_MACRAW) || (protocol == Sn_MR_PPPOE))
	{
		close(s);
		IINCHIP_WRITE(Sn_MR(s),protocol | flag);
		if (port != 0) {
			IINCHIP_WRITE(Sn_PORT0(s),(uint8)((port & 0xff00) >> 8));
			IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(port & 0x00ff));
		} else {
			local_port++; // if don't set the source port, set local_port number.
			IINCHIP_WRITE(Sn_PORT0(s),(uint8)((local_port & 0xff00) >> 8));
			IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(local_port & 0x00ff));
		}
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_OPEN); // run sockinit Sn_CR

		/* +20071122[chungs]:wait to process the command... */
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
		/* ------- */
		ret = 1;
	}
	else
	{
		ret = 0;
	}
#ifdef __DEF_IINCHIP_DBG__
	printf("Sn_SR = %.2x , Protocol = %.2x\r\n", IINCHIP_READ(Sn_SR(s)), IINCHIP_READ(Sn_MR(s)));
#endif
	return ret;
}


/**
@brief	This function close the socket and parameter is "s" which represent the socket number
*/ 
void close(SOCKET s)
{
#ifdef __DEF_IINCHIP_DBG__
	printf("close()\r\n");
#endif
	
	IINCHIP_WRITE(Sn_CR(s),Sn_CR_CLOSE);

	/* +20071122[chungs]:wait to process the command... */
	while( IINCHIP_READ(Sn_CR(s)) ) 
		;
	/* ------- */

	/* +2008.01 [hwkim]: clear interrupt */	
	#ifdef __DEF_IINCHIP_INT__
      /* m2008.01 [bj] : all clear */
	       putISR(s, 0x00);
	#else
      /* m2008.01 [bj] : all clear */
		IINCHIP_WRITE(Sn_IR(s), 0xFF);
	#endif
}


/**
@brief	This function established  the connection for the channel in passive (server) mode. This function waits for the request from the peer.
@return	1 for success else 0.
*/ 
uint8 listen(
	SOCKET s	/**< the socket number */
	)
{
	uint8 ret;
#ifdef __DEF_IINCHIP_DBG__
	printf("listen()\r\n");
#endif
	if (IINCHIP_READ(Sn_SR(s)) == SOCK_INIT)
	{
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_LISTEN);
		/* +20071122[chungs]:wait to process the command... */
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
		/* ------- */
		ret = 1;
	}
	else
	{
		ret = 0;
#ifdef __DEF_IINCHIP_DBG__
	printf("Fail[invalid ip,port]\r\n");
#endif
	}
	return ret;
}


/**
@brief	This function established  the connection for the channel in Active (client) mode. 
		This function waits for the untill the connection is established.
		
@return	1 for success else 0.
*/ 
uint8 connect(SOCKET s, uint8 * addr, uint16 port)
{
	uint8 ret;
#ifdef __DEF_IINCHIP_DBG__
	printf("connect()\r\n");
#endif
	if 
		(
			((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) ||
		 	((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
		 	(port == 0x00) 
		) 
 	{
 		ret = 0;
#ifdef __DEF_IINCHIP_DBG__
	printf("Fail[invalid ip,port]\r\n");
#endif
	}
	else
	{
		ret = 1;
		// set destination IP
		IINCHIP_WRITE(Sn_DIPR0(s),addr[0]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]);
		IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8));
		IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff));
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_CONNECT);
      /* m2008.01 [bj] :  wait for completion */
		while ( IINCHIP_READ(Sn_CR(s)) ) ;

	}

	return ret;
}



/**
@brief	This function used for disconnect the socket and parameter is "s" which represent the socket number
@return	1 for success else 0.
*/ 
void disconnect(SOCKET s)
{
#ifdef __DEF_IINCHIP_DBG__
	printf("disconnect()\r\n");
#endif
	IINCHIP_WRITE(Sn_CR(s),Sn_CR_DISCON);

	/* +20071122[chungs]:wait to process the command... */
	while( IINCHIP_READ(Sn_CR(s)) ) 
		;
	/* ------- */
}


/**
@brief	This function used to send the data in TCP mode
@return	1 for success else 0.
*/ 
uint16 send(
	SOCKET s, 		/**< the socket index */
	const uint8 * buf, 	/**< a pointer to data */
	uint16 len		/**< the data size to be send */
	)
{
	uint8 status=0;
	uint16 ret=0;
	uint16 freesize=0;
#ifdef __DEF_IINCHIP_DBG__
	printf("send()\r\n");
#endif

   if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size.
   else ret = len;

   // if freebuf is available, start.
	do 
	{
		freesize = getSn_TX_FSR(s);
		status = IINCHIP_READ(Sn_SR(s));
		if ((status != SOCK_ESTABLISHED) && (status != SOCK_CLOSE_WAIT))
		{
			ret = 0; 
			break;
		}
#ifdef __DEF_IINCHIP_DBG__
		printf("socket %d freesize(%d) empty or error\r\n", s, freesize);
#endif
	} while (freesize < ret);

      // copy data
	send_data_processing(s, (uint8 *)buf, ret);
	IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND);

	/* +20071122[chungs]:wait to process the command... */
	while( IINCHIP_READ(Sn_CR(s)) ) 
		;
	/* ------- */

/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
	while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#else
	while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#endif
	{
		/* m2008.01 [bj] : reduce code */
		if ( IINCHIP_READ(Sn_SR(s)) == SOCK_CLOSED )
		{
#ifdef __DEF_IINCHIP_DBG__
			printf("SOCK_CLOSED.\r\n");
#endif
			close(s);
			return 0;
		}
  	}
/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
  	putISR(s, getISR(s) & (~Sn_IR_SEND_OK));
#else
	IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK);
#endif
  	return ret;
}


/**
@brief	This function is an application I/F function which is used to receive the data in TCP mode.
		It continues to wait for data as much as the application wants to receive.
		
@return	received data size for success else -1.
*/ 
uint16 recv(
	SOCKET s, 	/**< socket index */
	uint8 * buf, 	/**< a pointer to copy the data to be received */
	uint16 len	/**< the data size to be read */
	)
{
	uint16 ret=0;
#ifdef __DEF_IINCHIP_DBG__
	printf("recv()\r\n");
#endif


	if ( len > 0 )
	{
		recv_data_processing(s, buf, len);
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV);

		/* +20071122[chungs]:wait to process the command... */
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
		/* ------- */
		ret = len;
	}
	return ret;
}


/**
@brief	This function is an application I/F function which is used to send the data for other then TCP mode. 
		Unlike TCP transmission, The peer's destination address and the port is needed.
		
@return	This function return send data size for success else -1.
*/ 
uint16 sendto(
	SOCKET s, 		/**< socket index */
	const uint8 * buf, 	/**< a pointer to the data */
	uint16 len, 		/**< the data size to send */
	uint8 * addr, 		/**< the peer's Destination IP address */
	uint16 port		/**< the peer's destination port number */
	)
{
//	uint8 status=0;
//	uint8 isr=0;
	uint16 ret=0;
	
#ifdef __DEF_IINCHIP_DBG__
	printf("sendto()\r\n");
#endif
   if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size.
   else ret = len;

	if
		(
		 	((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
		 	((port == 0x00)) ||(ret == 0)
		) 
 	{
 	   /* +2008.01 [bj] : added return value */
 	   ret = 0;
#ifdef __DEF_IINCHIP_DBG__
	printf("%d Fail[%.2x.%.2x.%.2x.%.2x, %.d, %d]\r\n",s, addr[0], addr[1], addr[2], addr[3] , port, len);
	printf("Fail[invalid ip,port]\r\n");
#endif
	}
	else
	{
		IINCHIP_WRITE(Sn_DIPR0(s),addr[0]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]);
		IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]);
		IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8));
		IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff));

  		// copy data
  		send_data_processing(s, (uint8 *)buf, ret);
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND);

		/* +20071122[chungs]:wait to process the command... */
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
		/* ------- */
		
/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
   	while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#else
	   while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#endif
		{
#ifdef __DEF_IINCHIP_INT__
      	if (getISR(s) & Sn_IR_TIMEOUT)
#else
	      if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT)
#endif
			{
#ifdef __DEF_IINCHIP_DBG__
				printf("send fail.\r\n");
#endif
/* +2008.01 [bj]: clear interrupt */
#ifdef __DEF_IINCHIP_INT__
         	putISR(s, getISR(s) & ~(Sn_IR_SEND_OK | Sn_IR_TIMEOUT));  /* clear SEND_OK & TIMEOUT */
#else
         	IINCHIP_WRITE(Sn_IR(s), (Sn_IR_SEND_OK | Sn_IR_TIMEOUT)); /* clear SEND_OK & TIMEOUT */
#endif
			return 0;
			}
		}

/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
     	putISR(s, getISR(s) & (~Sn_IR_SEND_OK));
#else
	   IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK);
#endif

	}
	return ret;
}


/**
@brief	This function is an application I/F function which is used to receive the data in other then
	TCP mode. This function is used to receive UDP, IP_RAW and MAC_RAW mode, and handle the header as well. 
	
@return	This function return received data size for success else -1.
*/ 
uint16 recvfrom(
	SOCKET s, 	/**< the socket number */
	uint8 * buf, 	/**< a pointer to copy the data to be received */
	uint16 len, 	/**< the data size to read */
	uint8 * addr, 	/**< a pointer to store the peer's IP address */
	uint16 *port	/**< a pointer to store the peer's port number. */
	)
{
	uint8 head[8];
	uint16 data_len=0;
	uint16 ptr=0;
#ifdef __DEF_IINCHIP_DBG__
	printf("recvfrom()\r\n");
#endif

	if ( len > 0 )
	{
   	ptr = IINCHIP_READ(Sn_RX_RD0(s));
   	ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_RX_RD0(s) + 1);
#ifdef __DEF_IINCHIP_DBG__
   	printf("ISR_RX: rd_ptr : %.4x\r\n", ptr);
#endif
   	switch (IINCHIP_READ(Sn_MR(s)) & 0x07)
   	{
   	case Sn_MR_UDP :
   			read_data(s, (uint8 *)ptr, head, 0x08);
   			ptr += 8;
   			// read peer's IP address, port number.
    			addr[0] = head[0];
   			addr[1] = head[1];
   			addr[2] = head[2];
   			addr[3] = head[3];
   			*port = head[4];
   			*port = (*port << 8) + head[5];
   			data_len = head[6];
   			data_len = (data_len << 8) + head[7];
   			
#ifdef __DEF_IINCHIP_DBG__
   			printf("UDP msg arrived\r\n");
   			printf("source Port : %d\r\n", *port);
   			printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]);
#endif

			read_data(s, (uint8 *)ptr, buf, data_len); // data copy.
			ptr += data_len;

			IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8));
			IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff));
   			break;
   
   	case Sn_MR_IPRAW :
   			read_data(s, (uint8 *)ptr, head, 0x06);
   			ptr += 6;
   
   			addr[0] = head[0];
   			addr[1] = head[1];
   			addr[2] = head[2];
   			addr[3] = head[3];
   			data_len = head[4];
   			data_len = (data_len << 8) + head[5];
   	
#ifdef __DEF_IINCHIP_DBG__
   			printf("IP RAW msg arrived\r\n");
   			printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]);
#endif
			read_data(s, (uint8 *)ptr, buf, data_len); // data copy.
			ptr += data_len;

			IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8));
			IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff));
   			break;
   	case Sn_MR_MACRAW :
   			read_data(s,(uint8*)ptr,head,2);
   			ptr+=2;
   			data_len = head[0];
   			data_len = (data_len<<8) + head[1] - 2;

   			read_data(s,(uint8*) ptr,buf,data_len);
   			ptr += data_len;
   			IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8));
   			IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff));
   			
#ifdef __DEF_IINCHIP_DGB__
			printf("MAC RAW msg arrived\r\n");
			printf("dest mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[0],buf[1],buf[2],buf[3],buf[4],buf[5]);
			printf("src  mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[6],buf[7],buf[8],buf[9],buf[10],buf[11]);
			printf("type    =%.2X%.2X\r\n",buf[12],buf[13]); 
#endif			
			break;

   	default :
   			break;
   	}
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV);

		/* +20071122[chungs]:wait to process the command... */
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
		/* ------- */
	}
#ifdef __DEF_IINCHIP_DBG__
	printf("recvfrom() end ..\r\n");
#endif
 	return data_len;
}


uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len)
{
	uint8 status=0;
//	uint8 isr=0;
	uint16 ret=0;
	
#ifdef __DEF_IINCHIP_DBG__
	printf("igmpsend()\r\n");
#endif
   if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size.
   else ret = len;

	if	(ret == 0) 
 	{
 	   ;
#ifdef __DEF_IINCHIP_DBG__
	printf("%d Fail[%d]\r\n",len);
#endif
	}
	else
	{
		// copy data
		send_data_processing(s, (uint8 *)buf, ret);
		IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND);
/* +2008.01 bj */	
		while( IINCHIP_READ(Sn_CR(s)) ) 
			;
/* ------- */
		
/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
   	while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#else
	   while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) 
#endif
		{
			status = IINCHIP_READ(Sn_SR(s));
#ifdef __DEF_IINCHIP_INT__
      	if (getISR(s) & Sn_IR_TIMEOUT)
#else
	      if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT)
#endif
			{
#ifdef __DEF_IINCHIP_DBG__
				printf("igmpsend fail.\r\n");
#endif
			   /* in case of igmp, if send fails, then socket closed */
			   /* if you want change, remove this code. */
			   close(s);
			   /* ----- */
			   
				return 0;
			}
		}

/* +2008.01 bj */	
#ifdef __DEF_IINCHIP_INT__
     	putISR(s, getISR(s) & (~Sn_IR_SEND_OK));
#else
	   IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK);
#endif
   }
	return ret;
}