/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ /** * @file * * lwIP Options Configuration */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #include "wl_api.h" #include #ifndef BOARD #error "BOARD must be defined" #endif /* ----------------------------------------------- ---------- Platform specific locking ---------- ----------------------------------------------- */ /** * NO_SYS==1: Provides VERY minimal functionality. Otherwise, * use lwIP facilities. */ #define NO_SYS 1 /* ------------------------------------ ---------- Memory options ---------- ------------------------------------ */ /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #define MEM_ALIGNMENT 4 /** * MEM_SIZE: the size of the heap memory. If the application will send * a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 16000 /* ------------------------------------------------ ---------- Internal Memory Pool Sizes ---------- ------------------------------------------------ */ /** * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). * If the application sends a lot of data out of ROM (or other static memory), * this should be set high. */ #if BOARD == EVK1101 /* Reduced RAM */ #define MEMP_NUM_PBUF 4 #else #define MEMP_NUM_PBUF 30 #endif /** * MEMP_NUM_RAW_PCB: Number of raw connection PCBs * (requires the LWIP_RAW option) */ #define MEMP_NUM_RAW_PCB 4 /** * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One * per active UDP "connection". * (requires the LWIP_UDP option) */ #define MEMP_NUM_UDP_PCB 4 /** * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB 4 /** * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB_LISTEN 2 /** * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. * (requires the LWIP_TCP option) */ #if BOARD == EVK1101 /* Reduced RAM */ #define MEMP_NUM_TCP_SEG 2 #else #define MEMP_NUM_TCP_SEG 32 #endif /** * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing * packets (pbufs) that are waiting for an ARP request (to resolve * their destination address) to finish. * (requires the ARP_QUEUEING option) */ #define MEMP_NUM_ARP_QUEUE 2 /** * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. * (requires NO_SYS==0) */ #define MEMP_NUM_SYS_TIMEOUT 0 /** * MEMP_NUM_NETBUF: the number of struct netbufs. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETBUF 0 /** * MEMP_NUM_NETCONN: the number of struct netconns. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETCONN 0 /** * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used * for callback/timeout API communication. * (only needed if you use tcpip.c) */ #define MEMP_NUM_TCPIP_MSG_API 0 /** * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used * for incoming packets. * (only needed if you use tcpip.c) */ #define MEMP_NUM_TCPIP_MSG_INPKT 0 /** * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #if BOARD == EVK1101 /* Reduced RAM */ #define PBUF_POOL_SIZE 2 #else #define PBUF_POOL_SIZE 32 #endif /* --------------------------------- ---------- ARP options ---------- --------------------------------- */ /** * LWIP_ARP==1: Enable ARP functionality. */ #define LWIP_ARP 1 /* -------------------------------- ---------- IP options ---------- -------------------------------- */ /** * IP_FORWARD==1: Enables the ability to forward IP packets across network * interfaces. If you are going to run lwIP on a device with only one network * interface, define this to 0. */ #define IP_FORWARD 0 /** * IP_OPTIONS: Defines the behavior for IP options. * IP_OPTIONS==0_ALLOWED: All packets with IP options are dropped. * IP_OPTIONS==1_ALLOWED: IP options are allowed (but not parsed). */ #define IP_OPTIONS_ALLOWED 1 /** * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that * this option does not affect outgoing packet sizes, which can be controlled * via IP_FRAG. */ #define IP_REASSEMBLY 1 /** * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #define IP_FRAG 1 /** * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived * in this time, the whole packet is discarded. */ #define IP_REASS_MAXAGE 3 /** * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. * Since the received pbufs are enqueued, be sure to configure * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive * packets even if the maximum amount of fragments is enqueued for reassembly! */ #if BOARD == EVK1101 /* Reduced RAM */ #define IP_REASS_MAX_PBUFS PBUF_POOL_SIZE #define MEMP_NUM_REASSDATA PBUF_POOL_SIZE-1 #else #define IP_REASS_MAX_PBUFS 10 #endif /** * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP * fragmentation. Otherwise pbufs are allocated and reference the original * packet data to be fragmented. */ #define IP_FRAG_USES_STATIC_BUF 0 /** * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. */ #define IP_DEFAULT_TTL 255 /* ---------------------------------- ---------- ICMP options ---------- ---------------------------------- */ /** * LWIP_ICMP==1: Enable ICMP module inside the IP stack. * Be careful, disable that make your product non-compliant to RFC1122 */ #define LWIP_ICMP 1 /** * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. */ #define ICMP_TTL (IP_DEFAULT_TTL) /* --------------------------------- ---------- RAW options ---------- --------------------------------- */ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #define LWIP_RAW 1 /* ---------------------------------- ---------- DHCP options ---------- ---------------------------------- */ /** * LWIP_DHCP==1: Enable DHCP module. */ #define LWIP_DHCP 1 /* ------------------------------------ ---------- AUTOIP options ---------- ------------------------------------ */ /** * LWIP_AUTOIP==1: Enable AUTOIP module. */ #define LWIP_AUTOIP 0 /* ---------------------------------- ---------- SNMP options ---------- ---------------------------------- */ /** * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP * transport. */ #define LWIP_SNMP 0 #define SNMP_PRIVATE_MIB 0 /* ---------------------------------- ---------- IGMP options ---------- ---------------------------------- */ /** * LWIP_IGMP==1: Turn on IGMP module. */ #define LWIP_IGMP 0 /* ---------------------------------- ---------- DNS options ----------- ---------------------------------- */ /** * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS * transport. */ #define LWIP_DNS 1 /* --------------------------------- ---------- UDP options ---------- --------------------------------- */ /** * LWIP_UDP==1: Turn on UDP. */ #define LWIP_UDP 1 /** * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) */ #define LWIP_UDPLITE 0 /** * UDP_TTL: Default Time-To-Live value. */ #define UDP_TTL (IP_DEFAULT_TTL) /* --------------------------------- ---------- TCP options ---------- --------------------------------- */ /** * LWIP_TCP==1: Turn on TCP. */ #define LWIP_TCP 1 /* ---------------------------------- ---------- Pbuf options ---------- ---------------------------------- */ /** * PBUF_LINK_HLEN: the number of bytes that should be allocated for a * link level header. The default is 14, the standard value for * Ethernet. */ #define PBUF_LINK_HLEN (14 + ETH_PAD_SIZE) /* ------------------------------------ ---------- LOOPIF options ---------- ------------------------------------ */ /** * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c */ #define LWIP_HAVE_LOOPIF 1 #define LWIP_LOOPIF_MULTITHREADING 0 /* ---------------------------------------------- ---------- Sequential layer options ---------- ---------------------------------------------- */ /** * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) */ #define LWIP_NETCONN 0 /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #define LWIP_SOCKET 0 /* ---------------------------------------- ---------- Statistics options ---------- ---------------------------------------- */ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #define LWIP_STATS 1 #define LINK_STATS 1 /* Misc */ #define LWIP_NETIF_LINK_CALLBACK 1 #define LWIP_NETIF_STATUS_CALLBACK 1 #define LWIP_TIMEVAL_PRIVATE 0 #undef DHCP_DOES_ARP_CHECK #if 0 #define LWIP_DEBUG 1 //#define NETIF_DEBUG LWIP_DBG_ON //#define DHCP_DEBUG LWIP_DBG_ON //#define ICMP_DEBUG LWIP_DBG_ON //#define TCP_DEBUG LWIP_DBG_ON //#define TCP_RTO_DEBUG LWIP_DBG_ON //#define IP_DEBUG LWIP_DBG_ON //#define TCP_CWND_DEBUG LWIP_DBG_ON //#define ETHARP_DEBUG LWIP_DBG_ON #define PBUF_DEBUG LWIP_DBG_ON //#define TCP_INPUT_DEBUG LWIP_DBG_ON //#define TCP_OUTPUT_DEBUG LWIP_DBG_ON #endif #define ETH_PAD_SIZE WL_HEADER_SIZE /* size of wifiengine header */ #define MEM_LIBC_MALLOC 1 #define TCP_MSS 512 #if BOARD == EVK1101 /* Reduced RAM */ #define TCP_SND_BUF (1460*1) /* MTU (1500) - IP - TCP hdrs == 1460 */ #else #define TCP_SND_BUF 4096 #endif #endif /* __LWIPOPTS_H__ */