/*! \page License * Copyright (C) 2009, H&D Wireless AB All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of H&D Wireless AB may not be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY H&D WIRELESS AB ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef STARTUP_H #define STARTUP_H #include <board.h> #include <wl_api.h> /* defines SPB104, SPB105 */ void board_init(void); /* * * EVK1100 * --------------------------------------------------------------------------- * */ #if BOARD == EVK1100 /* USART0 physical assignment */ #define BOARD_RS232_0 AVR32_USART1 #define BOARD_RS232_0_TX \ { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } #define BOARD_RS232_0_RX \ { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } /* USART1 physical assignment */ #define BOARD_RS232_1 AVR32_USART0 #define BOARD_RS232_1_TX \ { AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION } #define BOARD_RS232_1_RX \ { AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION }, /* Clocks */ #define USE_PLL #define OSC 0 #define PLL_MUL 10 /* Wifi (SPB104 only) */ #if defined(EXT_BOARD) #if EXT_BOARD == SPB104 #define WL_SPI AVR32_SPI1 /* Pin 8 NC, so no irq support if using SD-slot */ #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX #define WL_SPI_CS 1 #define WL_SPI_NPCS0 { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION } #define WL_SPI_NPCS { AVR32_SPI1_NPCS_1_0_PIN, AVR32_SPI1_NPCS_1_0_FUNCTION } #define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION } #define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION } #define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION } #endif #endif /* EXT_BOARD */ /* * * EVK1101 * --------------------------------------------------------------------------- * */ #elif BOARD == EVK1101 /* USART0 physical assignment */ #define BOARD_RS232_0 AVR32_USART1 #define BOARD_RS232_0_TX \ { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } #define BOARD_RS232_0_RX \ { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } /* Clocks */ #define USE_PLL #define OSC 0 #define PLL_MUL 9 /* Wifi (SPB104 only) */ #if defined(EXT_BOARD) #if EXT_BOARD == SPB104 /* Pin 8 NC, so no irq support if using SD-slot */ #define WL_SPI AVR32_SPI #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI_TX #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI_RX #define WL_SPI_CS 1 #if EXT_BOARD == SPB105 #define WL_SHUTDOWN_PIN AVR32_PIN_PA06 #define WL_POWER_PIN AVR32_PIN_PA30 #endif #define WL_SPI_NPCS0 { AVR32_SPI_NPCS_0_0_PIN, AVR32_SPI_NPCS_0_0_FUNCTION } #define WL_SPI_NPCS { AVR32_SPI_NPCS_1_0_PIN, AVR32_SPI_NPCS_1_0_FUNCTION } #define WL_SPI_MISO { AVR32_SPI_MISO_0_0_PIN, AVR32_SPI_MISO_0_0_FUNCTION } #define WL_SPI_MOSI { AVR32_SPI_MOSI_0_0_PIN, AVR32_SPI_MOSI_0_0_FUNCTION } #define WL_SPI_SCK { AVR32_SPI_SCK_0_0_PIN, AVR32_SPI_SCK_0_0_FUNCTION } #endif #endif /* EXT_BOARD */ /* * * EVK1104 * --------------------------------------------------------------------------- * */ #elif BOARD == EVK1104 /* EVK1104 */ /* USART0 physical assignment */ #define BOARD_RS232_0 AVR32_USART1 #define BOARD_RS232_0_TX \ { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } #define BOARD_RS232_0_RX \ { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } /* Clocks */ #define USE_PLL #define OSC 0 #define PLL_MUL 9 /* for some reason we cant use 66 MHz */ /* Wifi (SDIO: SPB104 only; SPI: SPB105 only) */ #if defined(EXT_BOARD) #if EXT_BOARD == SPB105 #define WL_SPI AVR32_SPI0 #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ #define WL_SHUTDOWN_PIN AVR32_PIN_PA17 /* Pin 8 on RF-head -> Pin 4 on wifi */ #define WL_IRQ_PIN AVR32_PIN_PA18 /* Pin 6 on RF-head -> Pin 3 on wifi */ #define WL_IRQ AVR32_GPIO_IRQ_2 #define WL_SPI_CS 3 #define WL_SPI_NPCS { AVR32_SPI0_NPCS_3_1_PIN, AVR32_SPI0_NPCS_3_1_FUNCTION } #define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION } #define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION } #define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION } #elif EXT_BOARD == SPB104 #ifdef SDIO_SLOT_A #define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION } #define WL_SDIO_CMD { AVR32_MCI_CMD_0_PIN, AVR32_MCI_CMD_0_FUNCTION } #define WL_SDIO_DAT0 { AVR32_MCI_DATA_0_PIN, AVR32_MCI_DATA_0_FUNCTION } #define WL_SDIO_DAT1 { AVR32_MCI_DATA_1_PIN, AVR32_MCI_DATA_1_FUNCTION } #define WL_SDIO_DAT2 { AVR32_MCI_DATA_2_PIN, AVR32_MCI_DATA_2_FUNCTION } #define WL_SDIO_DAT3 { AVR32_MCI_DATA_3_PIN, AVR32_MCI_DATA_3_FUNCTION } #else #define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION } #define WL_SDIO_CMD { AVR32_MCI_CMD_1_0_PIN, AVR32_MCI_CMD_1_0_FUNCTION } #define WL_SDIO_DAT0 { AVR32_MCI_DATA_8_0_PIN, AVR32_MCI_DATA_8_0_FUNCTION } #define WL_SDIO_DAT1 { AVR32_MCI_DATA_9_0_PIN, AVR32_MCI_DATA_9_0_FUNCTION } #define WL_SDIO_DAT2 { AVR32_MCI_DATA_10_0_PIN, AVR32_MCI_DATA_10_0_FUNCTION } #define WL_SDIO_DAT3 { AVR32_MCI_DATA_11_0_PIN, AVR32_MCI_DATA_11_0_FUNCTION } #endif #endif #endif /* EXT_BOARD */ /* * * EVK1105 * --------------------------------------------------------------------------- * */ #elif BOARD == EVK1105 /* EVK1105 */ /* USART0 physical assignment */ #define BOARD_RS232_0 AVR32_USART0 #define BOARD_RS232_0_TX \ { AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION } #define BOARD_RS232_0_RX \ { AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION } /* Clocks */ #define USE_PLL #define OSC 1 #define PLL_MUL 10 /* Wifi SPB104/SPB105 */ #if defined(EXT_BOARD) #define WL_SPI AVR32_SPI0 #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX #if EXT_BOARD == SPB105 #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ #define WL_SHUTDOWN_PIN AVR32_PIN_PB31 /* Pin 8 on RF-head -> Pin 4 on wifi */ #define WL_IRQ_PIN AVR32_PIN_PB30 /* Pin 6 on RF-head -> Pin 3 on wifi */ #define WL_IRQ AVR32_GPIO_IRQ_7 #define WL_SPI_CS 2 #elif EXT_BOARD == SPB104 #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ #define WL_SPI_CS 1 #endif #define WL_SPI_NPCS0 { AVR32_SPI0_NPCS_0_0_PIN, AVR32_SPI0_NPCS_0_0_FUNCTION } #if WL_SPI_CS == 1 #define WL_SPI_NPCS { AVR32_SPI0_NPCS_1_0_PIN, AVR32_SPI0_NPCS_1_0_FUNCTION } #elif WL_SPI_CS == 2 #define WL_SPI_NPCS { AVR32_SPI0_NPCS_2_0_PIN, AVR32_SPI0_NPCS_2_0_FUNCTION } #endif #define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION } #define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION } #define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION } #endif /* EXT_BOARD */ /* * * ARDUINO * --------------------------------------------------------------------------- * */ #elif BOARD == ARDUINO /* ARDUINO */ /* USART0 physical assignment */ #define BOARD_RS232_1 AVR32_USART1 #define BOARD_RS232_1_TX \ { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } #define BOARD_RS232_1_RX \ { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } /* Clocks */ #define USE_PLL #define OSC 0 #define PLL_MUL 8 #define WL_SPI AVR32_SPI1 #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX #define WL_SHUTDOWN_PIN AVR32_PIN_PA09 #define WL_IRQ_PIN AVR32_PIN_PA03 /* * WL_IRQ_# = (WL_IRQ_PIN / 32) * 4 + (WL_IRQ_PIN / 8) % 4 * 3 => 0 * 4 + 0 = 0 */ #define WL_IRQ AVR32_GPIO_IRQ_0 #define WL_SPI_CS 0 #define WL_RESET_PIN AVR32_PIN_PA07 #define WL_EXTERNAL_RESET 1 #define WL_SPI_NPCS { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION } #define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION } #define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION } #define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION } #endif /* EVKxxxx */ #if OSC == 0 # define FOSC FOSC0 /* 12 MHz */ #else # define FOSC FOSC1 /* 11.2896 MHz */ #endif #ifdef USE_PLL # define FMCK_HZ ((FOSC * (PLL_MUL + 1)) / 2) #else # define FMCK_HZ FOSC #endif #define FCPU_HZ FMCK_HZ #define FHSB_HZ FCPU_HZ #define FPBB_HZ FMCK_HZ #define FPBA_HZ FMCK_HZ #ifndef CONFIG_CONSOLE_PORT #define CONFIG_CONSOLE_PORT BOARD_RS232_1 #endif #endif