/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */

/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
 *
 * \brief Memory access control configuration file.
 *
 * This file contains the possible external configuration of the memory access
 * control.
 *
 * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
 * - Supported devices:  All AVR32 devices can be used.
 * - AppNote:
 *
 * \author               Atmel Corporation: http://www.atmel.com \n
 *                       Support and FAQ: http://support.atmel.no/
 *
 ******************************************************************************/

/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an Atmel
 * AVR product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
 *
 */

#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_

#include "compiler.h"
#include "board.h"


/*! \name Activation of Logical Unit Numbers
 */
//! @{
#define LUN_0                DISABLE  //!< On-Chip Virtual Memory.
#define LUN_1                ENABLE   //!< AT45DBX Data Flash.
#define LUN_2                DISABLE  //!< SD/MMC Card over SPI.
#define LUN_3                DISABLE
#define LUN_4                DISABLE
#define LUN_5                DISABLE
#define LUN_6                DISABLE
#define LUN_7                DISABLE
#define LUN_USB              DISABLE  //!< Host Mass-Storage Memory.
//! @}

/*! \name LUN 0 Definitions
 */
//! @{
#define VIRTUAL_MEM                             LUN_0
#define LUN_ID_VIRTUAL_MEM                      LUN_ID_0
#define LUN_0_INCLUDE                           "virtual_mem.h"
#define Lun_0_test_unit_ready                   virtual_test_unit_ready
#define Lun_0_read_capacity                     virtual_read_capacity
#define Lun_0_wr_protect                        virtual_wr_protect
#define Lun_0_removal                           virtual_removal
#define Lun_0_usb_read_10                       virtual_usb_read_10
#define Lun_0_usb_write_10                      virtual_usb_write_10
#define Lun_0_mem_2_ram                         virtual_mem_2_ram
#define Lun_0_ram_2_mem                         virtual_ram_2_mem
#define LUN_0_NAME                              "\"On-Chip Virtual Memory\""
//! @}

/*! \name LUN 1 Definitions
 */
//! @{
#define AT45DBX_MEM                             LUN_1
#define LUN_ID_AT45DBX_MEM                      LUN_ID_1
#define LUN_1_INCLUDE                           "at45dbx_mem.h"
#define Lun_1_test_unit_ready                   at45dbx_test_unit_ready
#define Lun_1_read_capacity                     at45dbx_read_capacity
#define Lun_1_wr_protect                        at45dbx_wr_protect
#define Lun_1_removal                           at45dbx_removal
#define Lun_1_usb_read_10                       at45dbx_usb_read_10
#define Lun_1_usb_write_10                      at45dbx_usb_write_10
#define Lun_1_mem_2_ram                         at45dbx_df_2_ram
#define Lun_1_ram_2_mem                         at45dbx_ram_2_df
#define LUN_1_NAME                              "\"AT45DBX Data Flash\""
//! @}

/*! \name LUN 2 Definitions
 */
//! @{
#define SD_MMC_SPI_MEM                          LUN_2
#define LUN_ID_SD_MMC_SPI_MEM                   LUN_ID_2
#define LUN_2_INCLUDE                           "sd_mmc_spi_mem.h"
#define Lun_2_test_unit_ready                   sd_mmc_spi_test_unit_ready
#define Lun_2_read_capacity                     sd_mmc_spi_read_capacity
#define Lun_2_wr_protect                        sd_mmc_spi_wr_protect
#define Lun_2_removal                           sd_mmc_spi_removal
#define Lun_2_usb_read_10                       sd_mmc_spi_usb_read_10
#define Lun_2_usb_write_10                      sd_mmc_spi_usb_write_10
#define Lun_2_mem_2_ram                         sd_mmc_spi_mem_2_ram
#define Lun_2_ram_2_mem                         sd_mmc_spi_ram_2_mem
#define LUN_2_NAME                              "\"SD/MMC Card over SPI\""
//! @}

/*! \name USB LUNs Definitions
 */
//! @{
#define MEM_USB                                 LUN_USB
#define LUN_ID_MEM_USB                          LUN_ID_USB
#define LUN_USB_INCLUDE                         "host_mem.h"
#define Lun_usb_test_unit_ready(lun)            host_test_unit_ready(lun)
#define Lun_usb_read_capacity(lun, nb_sect)     host_read_capacity(lun, nb_sect)
#define Lun_usb_read_sector_size(lun)           host_read_sector_size(lun)
#define Lun_usb_wr_protect(lun)                 host_wr_protect(lun)
#define Lun_usb_removal()                       host_removal()
#define Lun_usb_mem_2_ram(addr, ram)            host_read_10_ram(addr, ram)
#define Lun_usb_ram_2_mem(addr, ram)            host_write_10_ram(addr, ram)
#define LUN_USB_NAME                            "\"Host Mass-Storage Memory\""
//! @}

/*! \name Actions Associated with Memory Accesses
 *
 * Write here the action to associate with each memory access.
 *
 * \warning Be careful not to waste time in order not to disturb the functions.
 */
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}

/*! \name Activation of Interface Features
 */
//! @{
#define ACCESS_USB           DISABLED //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM    ENABLED  //!< MEM <-> RAM interface.
#define ACCESS_STREAM        ENABLED  //!< Streaming MEM <-> MEM interface.	//mlf
#define ACCESS_STREAM_RECORD DISABLED //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM    DISABLED //!< MEM <-> MEM interface.
#define ACCESS_CODEC         DISABLED //!< Codec interface.
//! @}

/*! \name Specific Options for Access Control
 */
//! @{
#define GLOBAL_WR_PROTECT    DISABLED //!< Management of a global write protection.
//! @}


#endif  // _CONF_ACCESS_H_