// Copyright (c) 2010, Peter Barrett 
/*
** Permission to use, copy, modify, and/or distribute this software for  
** any purpose with or without fee is hereby granted, provided that the  
** above copyright notice and this permission notice appear in all copies.  
**  
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
** SOFTWARE.  
*/

#ifndef __USBCORE_H__
#define __USBCORE_H__

#include "USBAPI.h"

//	Standard requests
#define GET_STATUS			0
#define CLEAR_FEATURE		1
#define SET_FEATURE			3
#define SET_ADDRESS			5
#define GET_DESCRIPTOR		6
#define SET_DESCRIPTOR		7
#define GET_CONFIGURATION	8
#define SET_CONFIGURATION	9
#define GET_INTERFACE		10
#define SET_INTERFACE		11


// bmRequestType
#define REQUEST_HOSTTODEVICE	0x00
#define REQUEST_DEVICETOHOST	0x80
#define REQUEST_DIRECTION		0x80

#define REQUEST_STANDARD		0x00
#define REQUEST_CLASS			0x20
#define REQUEST_VENDOR			0x40
#define REQUEST_TYPE			0x60

#define REQUEST_DEVICE			0x00
#define REQUEST_INTERFACE		0x01
#define REQUEST_ENDPOINT		0x02
#define REQUEST_OTHER			0x03
#define REQUEST_RECIPIENT		0x03

#define REQUEST_DEVICETOHOST_CLASS_INTERFACE    (REQUEST_DEVICETOHOST | REQUEST_CLASS | REQUEST_INTERFACE)
#define REQUEST_HOSTTODEVICE_CLASS_INTERFACE    (REQUEST_HOSTTODEVICE | REQUEST_CLASS | REQUEST_INTERFACE)
#define REQUEST_DEVICETOHOST_STANDARD_INTERFACE (REQUEST_DEVICETOHOST | REQUEST_STANDARD | REQUEST_INTERFACE)

//	Descriptors

#define USB_DEVICE_DESC_SIZE 18
#define USB_CONFIGUARTION_DESC_SIZE 9
#define USB_INTERFACE_DESC_SIZE 9
#define USB_ENDPOINT_DESC_SIZE 7

#define USB_DEVICE_DESCRIPTOR_TYPE             1
#define USB_CONFIGURATION_DESCRIPTOR_TYPE      2
#define USB_STRING_DESCRIPTOR_TYPE             3
#define USB_INTERFACE_DESCRIPTOR_TYPE          4
#define USB_ENDPOINT_DESCRIPTOR_TYPE           5

// usb_20.pdf Table 9.6 Standard Feature Selectors
#define DEVICE_REMOTE_WAKEUP                   1
#define ENDPOINT_HALT                          2
#define TEST_MODE                              3

// usb_20.pdf Figure 9-4. Information Returned by a GetStatus() Request to a Device
#define FEATURE_SELFPOWERED_ENABLED     (1 << 0)
#define FEATURE_REMOTE_WAKEUP_ENABLED   (1 << 1)

#define USB_DEVICE_CLASS_COMMUNICATIONS        0x02
#define USB_DEVICE_CLASS_HUMAN_INTERFACE       0x03
#define USB_DEVICE_CLASS_STORAGE               0x08
#define USB_DEVICE_CLASS_VENDOR_SPECIFIC       0xFF

#define USB_CONFIG_POWERED_MASK                0x40
#define USB_CONFIG_BUS_POWERED                 0x80
#define USB_CONFIG_SELF_POWERED                0xC0
#define USB_CONFIG_REMOTE_WAKEUP               0x20

// bMaxPower in Configuration Descriptor
#define USB_CONFIG_POWER_MA(mA)                ((mA)/2)

// bEndpointAddress in Endpoint Descriptor
#define USB_ENDPOINT_DIRECTION_MASK            0x80
#define USB_ENDPOINT_OUT(addr)                 (lowByte((addr) | 0x00))
#define USB_ENDPOINT_IN(addr)                  (lowByte((addr) | 0x80))

#define USB_ENDPOINT_TYPE_MASK                 0x03
#define USB_ENDPOINT_TYPE_CONTROL              0x00
#define USB_ENDPOINT_TYPE_ISOCHRONOUS          0x01
#define USB_ENDPOINT_TYPE_BULK                 0x02
#define USB_ENDPOINT_TYPE_INTERRUPT            0x03

#define TOBYTES(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)

#ifndef USB_VERSION
#define USB_VERSION 0x200
#endif

//	Device
typedef struct {
	u8 len;				// 18
	u8 dtype;			// 1 USB_DEVICE_DESCRIPTOR_TYPE
	u16 usbVersion;		// 0x200 or 0x210
	u8	deviceClass;
	u8	deviceSubClass;
	u8	deviceProtocol;
	u8	packetSize0;	// Packet 0
	u16	idVendor;
	u16	idProduct;
	u16	deviceVersion;	// 0x100
	u8	iManufacturer;
	u8	iProduct;
	u8	iSerialNumber;
	u8	bNumConfigurations;
} DeviceDescriptor;

//	Config
typedef struct {
	u8	len;			// 9
	u8	dtype;			// 2
	u16 clen;			// total length
	u8	numInterfaces;
	u8	config;
	u8	iconfig;
	u8	attributes;
	u8	maxPower;
} ConfigDescriptor;

//	String

//	Interface
typedef struct
{
	u8 len;		// 9
	u8 dtype;	// 4
	u8 number;
	u8 alternate;
	u8 numEndpoints;
	u8 interfaceClass;
	u8 interfaceSubClass;
	u8 protocol;
	u8 iInterface;
} InterfaceDescriptor;

//	Endpoint
typedef struct
{
	u8 len;		// 7
	u8 dtype;	// 5
	u8 addr;
	u8 attr;
	u16 packetSize;
	u8 interval;
} EndpointDescriptor;

#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \
	{ 18, 1, USB_VERSION, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs }

#define D_CONFIG(_totalLength,_interfaces) \
	{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED | USB_CONFIG_REMOTE_WAKEUP, USB_CONFIG_POWER_MA(500) }

#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \
	{ 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 }

#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \
	{ 7, 5, _addr,_attr,_packetSize, _interval }

// Bootloader related fields
// Old Caterina bootloader places the MAGIC key into unsafe RAM locations (it can be rewritten
// by the running sketch before to actual reboot).
// Newer bootloaders, recognizable by the LUFA "signature" at the end of the flash, can handle both
// the usafe and the safe location.
#ifndef MAGIC_KEY
#define MAGIC_KEY 0x7777
#endif

#ifndef MAGIC_KEY_POS
#define MAGIC_KEY_POS 0x0800
#endif

#ifndef NEW_LUFA_SIGNATURE
#define NEW_LUFA_SIGNATURE 0xDCFB
#endif

#endif