optiboot_pro_16MHz.elf:     file format elf32-avr

Sections:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .text         000001fc  00003e00  00003e00  00000054  2**1
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  1 .debug_aranges 00000028  00000000  00000000  00000250  2**0
                  CONTENTS, READONLY, DEBUGGING
  2 .debug_pubnames 0000006a  00000000  00000000  00000278  2**0
                  CONTENTS, READONLY, DEBUGGING
  3 .debug_info   00000284  00000000  00000000  000002e2  2**0
                  CONTENTS, READONLY, DEBUGGING
  4 .debug_abbrev 000001ae  00000000  00000000  00000566  2**0
                  CONTENTS, READONLY, DEBUGGING
  5 .debug_line   00000450  00000000  00000000  00000714  2**0
                  CONTENTS, READONLY, DEBUGGING
  6 .debug_frame  00000090  00000000  00000000  00000b64  2**2
                  CONTENTS, READONLY, DEBUGGING
  7 .debug_str    00000141  00000000  00000000  00000bf4  2**0
                  CONTENTS, READONLY, DEBUGGING
  8 .debug_loc    000001e1  00000000  00000000  00000d35  2**0
                  CONTENTS, READONLY, DEBUGGING
  9 .debug_ranges 00000068  00000000  00000000  00000f16  2**0
                  CONTENTS, READONLY, DEBUGGING

Disassembly of section .text:

00003e00 <main>:
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif

/* main program starts here */
int main(void) {
    3e00:	11 24       	eor	r1, r1
#ifdef __AVR_ATmega8__
  SP=RAMEND;  // This is done by hardware reset
#endif

  // Adaboot no-wait mod
  ch = MCUSR;
    3e02:	84 b7       	in	r24, 0x34	; 52
  MCUSR = 0;
    3e04:	14 be       	out	0x34, r1	; 52
  if (!(ch & _BV(EXTRF))) appStart();
    3e06:	81 ff       	sbrs	r24, 1
    3e08:	e6 d0       	rcall	.+460    	; 0x3fd6 <appStart>

#if LED_START_FLASHES > 0
  // Set up Timer 1 for timeout counter
  TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
    3e0a:	85 e0       	ldi	r24, 0x05	; 5
    3e0c:	80 93 81 00 	sts	0x0081, r24
  UCSRA = _BV(U2X); //Double speed mode USART
  UCSRB = _BV(RXEN) | _BV(TXEN);  // enable Rx & Tx
  UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0);  // config USART; 8N1
  UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
#else
  UCSR0A = _BV(U2X0); //Double speed mode USART0
    3e10:	82 e0       	ldi	r24, 0x02	; 2
    3e12:	80 93 c0 00 	sts	0x00C0, r24
  UCSR0B = _BV(RXEN0) | _BV(TXEN0);
    3e16:	88 e1       	ldi	r24, 0x18	; 24
    3e18:	80 93 c1 00 	sts	0x00C1, r24
  UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
    3e1c:	86 e0       	ldi	r24, 0x06	; 6
    3e1e:	80 93 c2 00 	sts	0x00C2, r24
  UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
    3e22:	80 e1       	ldi	r24, 0x10	; 16
    3e24:	80 93 c4 00 	sts	0x00C4, r24
#endif
#endif

  // Set up watchdog to trigger after 500ms
  watchdogConfig(WATCHDOG_1S);
    3e28:	8e e0       	ldi	r24, 0x0E	; 14
    3e2a:	cf d0       	rcall	.+414    	; 0x3fca <watchdogConfig>

  /* Set LED pin as output */
  LED_DDR |= _BV(LED);
    3e2c:	25 9a       	sbi	0x04, 5	; 4
    3e2e:	86 e0       	ldi	r24, 0x06	; 6
}

#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
  do {
    TCNT1 = -(F_CPU/(1024*16));
    3e30:	20 e3       	ldi	r18, 0x30	; 48
    3e32:	3c ef       	ldi	r19, 0xFC	; 252
    TIFR1 = _BV(TOV1);
    3e34:	91 e0       	ldi	r25, 0x01	; 1
}

#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
  do {
    TCNT1 = -(F_CPU/(1024*16));
    3e36:	30 93 85 00 	sts	0x0085, r19
    3e3a:	20 93 84 00 	sts	0x0084, r18
    TIFR1 = _BV(TOV1);
    3e3e:	96 bb       	out	0x16, r25	; 22
    while(!(TIFR1 & _BV(TOV1)));
    3e40:	b0 9b       	sbis	0x16, 0	; 22
    3e42:	fe cf       	rjmp	.-4      	; 0x3e40 <main+0x40>
#ifdef __AVR_ATmega8__
    LED_PORT ^= _BV(LED);
#else
    LED_PIN |= _BV(LED);
    3e44:	1d 9a       	sbi	0x03, 5	; 3
  return getch();
}

// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
  __asm__ __volatile__ (
    3e46:	a8 95       	wdr
    LED_PORT ^= _BV(LED);
#else
    LED_PIN |= _BV(LED);
#endif
    watchdogReset();
  } while (--count);
    3e48:	81 50       	subi	r24, 0x01	; 1
    3e4a:	a9 f7       	brne	.-22     	; 0x3e36 <main+0x36>
    /* get character from UART */
    ch = getch();

    if(ch == STK_GET_PARAMETER) {
      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
      getNch(1);
    3e4c:	dd 24       	eor	r13, r13
    3e4e:	d3 94       	inc	r13
        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
        addrPtr += 2;
      } while (--ch);
      
      // Write from programming buffer
      __boot_page_write_short((uint16_t)(void*)address);
    3e50:	a5 e0       	ldi	r26, 0x05	; 5
    3e52:	ea 2e       	mov	r14, r26
      boot_spm_busy_wait();

#if defined(RWWSRE)
      // Reenable read access to flash
      boot_rww_enable();
    3e54:	f1 e1       	ldi	r31, 0x11	; 17
    3e56:	ff 2e       	mov	r15, r31
#endif

  /* Forever loop */
  for (;;) {
    /* get character from UART */
    ch = getch();
    3e58:	ab d0       	rcall	.+342    	; 0x3fb0 <getch>

    if(ch == STK_GET_PARAMETER) {
    3e5a:	81 34       	cpi	r24, 0x41	; 65
    3e5c:	21 f4       	brne	.+8      	; 0x3e66 <main+0x66>
      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
      getNch(1);
    3e5e:	81 e0       	ldi	r24, 0x01	; 1
    3e60:	c5 d0       	rcall	.+394    	; 0x3fec <getNch>
      putch(0x03);
    3e62:	83 e0       	ldi	r24, 0x03	; 3
    3e64:	20 c0       	rjmp	.+64     	; 0x3ea6 <main+0xa6>
    }
    else if(ch == STK_SET_DEVICE) {
    3e66:	82 34       	cpi	r24, 0x42	; 66
    3e68:	11 f4       	brne	.+4      	; 0x3e6e <main+0x6e>
      // SET DEVICE is ignored
      getNch(20);
    3e6a:	84 e1       	ldi	r24, 0x14	; 20
    3e6c:	03 c0       	rjmp	.+6      	; 0x3e74 <main+0x74>
    }
    else if(ch == STK_SET_DEVICE_EXT) {
    3e6e:	85 34       	cpi	r24, 0x45	; 69
    3e70:	19 f4       	brne	.+6      	; 0x3e78 <main+0x78>
      // SET DEVICE EXT is ignored
      getNch(5);
    3e72:	85 e0       	ldi	r24, 0x05	; 5
    3e74:	bb d0       	rcall	.+374    	; 0x3fec <getNch>
    3e76:	91 c0       	rjmp	.+290    	; 0x3f9a <main+0x19a>
    }
    else if(ch == STK_LOAD_ADDRESS) {
    3e78:	85 35       	cpi	r24, 0x55	; 85
    3e7a:	81 f4       	brne	.+32     	; 0x3e9c <main+0x9c>
      // LOAD ADDRESS
      uint16_t newAddress;
      newAddress = getch();
    3e7c:	99 d0       	rcall	.+306    	; 0x3fb0 <getch>
      newAddress = (newAddress & 0xff) | (getch() << 8);
    3e7e:	08 2f       	mov	r16, r24
    3e80:	10 e0       	ldi	r17, 0x00	; 0
    3e82:	96 d0       	rcall	.+300    	; 0x3fb0 <getch>
    3e84:	90 e0       	ldi	r25, 0x00	; 0
    3e86:	98 2f       	mov	r25, r24
    3e88:	88 27       	eor	r24, r24
    3e8a:	80 2b       	or	r24, r16
    3e8c:	91 2b       	or	r25, r17
#ifdef RAMPZ
      // Transfer top bit to RAMPZ
      RAMPZ = (newAddress & 0x8000) ? 1 : 0;
#endif
      newAddress += newAddress; // Convert from word address to byte address
    3e8e:	88 0f       	add	r24, r24
    3e90:	99 1f       	adc	r25, r25
      address = newAddress;
    3e92:	90 93 01 02 	sts	0x0201, r25
    3e96:	80 93 00 02 	sts	0x0200, r24
    3e9a:	7e c0       	rjmp	.+252    	; 0x3f98 <main+0x198>
      verifySpace();
    }
    else if(ch == STK_UNIVERSAL) {
    3e9c:	86 35       	cpi	r24, 0x56	; 86
    3e9e:	29 f4       	brne	.+10     	; 0x3eaa <main+0xaa>
      // UNIVERSAL command is ignored
      getNch(4);
    3ea0:	84 e0       	ldi	r24, 0x04	; 4
    3ea2:	a4 d0       	rcall	.+328    	; 0x3fec <getNch>
      putch(0x00);
    3ea4:	80 e0       	ldi	r24, 0x00	; 0
    3ea6:	7c d0       	rcall	.+248    	; 0x3fa0 <putch>
    3ea8:	78 c0       	rjmp	.+240    	; 0x3f9a <main+0x19a>
    }
    /* Write memory, length is big endian and is in bytes */
    else if(ch == STK_PROG_PAGE) {
    3eaa:	84 36       	cpi	r24, 0x64	; 100
    3eac:	09 f0       	breq	.+2      	; 0x3eb0 <main+0xb0>
    3eae:	4e c0       	rjmp	.+156    	; 0x3f4c <main+0x14c>
      // PROGRAM PAGE - we support flash programming only, not EEPROM
      uint8_t *bufPtr;
      uint16_t addrPtr;

      getLen();
    3eb0:	87 d0       	rcall	.+270    	; 0x3fc0 <getLen>

      // If we are in RWW section, immediately start page erase
      if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
    3eb2:	e0 91 00 02 	lds	r30, 0x0200
    3eb6:	f0 91 01 02 	lds	r31, 0x0201
    3eba:	88 e3       	ldi	r24, 0x38	; 56
    3ebc:	e0 30       	cpi	r30, 0x00	; 0
    3ebe:	f8 07       	cpc	r31, r24
    3ec0:	18 f4       	brcc	.+6      	; 0x3ec8 <main+0xc8>
    3ec2:	83 e0       	ldi	r24, 0x03	; 3
    3ec4:	87 bf       	out	0x37, r24	; 55
    3ec6:	e8 95       	spm
    3ec8:	c0 e0       	ldi	r28, 0x00	; 0
    3eca:	d1 e0       	ldi	r29, 0x01	; 1
      
      // While that is going on, read in page contents
      bufPtr = buff;
      do *bufPtr++ = getch();
    3ecc:	71 d0       	rcall	.+226    	; 0x3fb0 <getch>
    3ece:	89 93       	st	Y+, r24
      while (--length);
    3ed0:	80 91 02 02 	lds	r24, 0x0202
    3ed4:	81 50       	subi	r24, 0x01	; 1
    3ed6:	80 93 02 02 	sts	0x0202, r24
    3eda:	88 23       	and	r24, r24
    3edc:	b9 f7       	brne	.-18     	; 0x3ecc <main+0xcc>

      // If we are in NRWW section, page erase has to be delayed until now.
      // Todo: Take RAMPZ into account
      if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
    3ede:	e0 91 00 02 	lds	r30, 0x0200
    3ee2:	f0 91 01 02 	lds	r31, 0x0201
    3ee6:	88 e3       	ldi	r24, 0x38	; 56
    3ee8:	e0 30       	cpi	r30, 0x00	; 0
    3eea:	f8 07       	cpc	r31, r24
    3eec:	18 f0       	brcs	.+6      	; 0x3ef4 <main+0xf4>
    3eee:	83 e0       	ldi	r24, 0x03	; 3
    3ef0:	87 bf       	out	0x37, r24	; 55
    3ef2:	e8 95       	spm

      // Read command terminator, start reply
      verifySpace();
    3ef4:	75 d0       	rcall	.+234    	; 0x3fe0 <verifySpace>
      
      // If only a partial page is to be programmed, the erase might not be complete.
      // So check that here
      boot_spm_busy_wait();
    3ef6:	07 b6       	in	r0, 0x37	; 55
    3ef8:	00 fc       	sbrc	r0, 0
    3efa:	fd cf       	rjmp	.-6      	; 0x3ef6 <main+0xf6>
      }
#endif

      // Copy buffer into programming buffer
      bufPtr = buff;
      addrPtr = (uint16_t)(void*)address;
    3efc:	40 91 00 02 	lds	r20, 0x0200
    3f00:	50 91 01 02 	lds	r21, 0x0201
    3f04:	a0 e0       	ldi	r26, 0x00	; 0
    3f06:	b1 e0       	ldi	r27, 0x01	; 1
      ch = SPM_PAGESIZE / 2;
      do {
        uint16_t a;
        a = *bufPtr++;
    3f08:	2c 91       	ld	r18, X
    3f0a:	30 e0       	ldi	r19, 0x00	; 0
        a |= (*bufPtr++) << 8;
    3f0c:	11 96       	adiw	r26, 0x01	; 1
    3f0e:	8c 91       	ld	r24, X
    3f10:	11 97       	sbiw	r26, 0x01	; 1
    3f12:	90 e0       	ldi	r25, 0x00	; 0
    3f14:	98 2f       	mov	r25, r24
    3f16:	88 27       	eor	r24, r24
    3f18:	82 2b       	or	r24, r18
    3f1a:	93 2b       	or	r25, r19
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif

/* main program starts here */
int main(void) {
    3f1c:	12 96       	adiw	r26, 0x02	; 2
      ch = SPM_PAGESIZE / 2;
      do {
        uint16_t a;
        a = *bufPtr++;
        a |= (*bufPtr++) << 8;
        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
    3f1e:	fa 01       	movw	r30, r20
    3f20:	0c 01       	movw	r0, r24
    3f22:	d7 be       	out	0x37, r13	; 55
    3f24:	e8 95       	spm
    3f26:	11 24       	eor	r1, r1
        addrPtr += 2;
    3f28:	4e 5f       	subi	r20, 0xFE	; 254
    3f2a:	5f 4f       	sbci	r21, 0xFF	; 255
      } while (--ch);
    3f2c:	f1 e0       	ldi	r31, 0x01	; 1
    3f2e:	a0 38       	cpi	r26, 0x80	; 128
    3f30:	bf 07       	cpc	r27, r31
    3f32:	51 f7       	brne	.-44     	; 0x3f08 <main+0x108>
      
      // Write from programming buffer
      __boot_page_write_short((uint16_t)(void*)address);
    3f34:	e0 91 00 02 	lds	r30, 0x0200
    3f38:	f0 91 01 02 	lds	r31, 0x0201
    3f3c:	e7 be       	out	0x37, r14	; 55
    3f3e:	e8 95       	spm
      boot_spm_busy_wait();
    3f40:	07 b6       	in	r0, 0x37	; 55
    3f42:	00 fc       	sbrc	r0, 0
    3f44:	fd cf       	rjmp	.-6      	; 0x3f40 <main+0x140>

#if defined(RWWSRE)
      // Reenable read access to flash
      boot_rww_enable();
    3f46:	f7 be       	out	0x37, r15	; 55
    3f48:	e8 95       	spm
    3f4a:	27 c0       	rjmp	.+78     	; 0x3f9a <main+0x19a>
#endif

    }
    /* Read memory block mode, length is big endian.  */
    else if(ch == STK_READ_PAGE) {
    3f4c:	84 37       	cpi	r24, 0x74	; 116
    3f4e:	b9 f4       	brne	.+46     	; 0x3f7e <main+0x17e>
      // READ PAGE - we only read flash
      getLen();
    3f50:	37 d0       	rcall	.+110    	; 0x3fc0 <getLen>
      verifySpace();
    3f52:	46 d0       	rcall	.+140    	; 0x3fe0 <verifySpace>
        putch(result);
        address++;
      }
      while (--length);
#else
      do putch(pgm_read_byte_near(address++));
    3f54:	e0 91 00 02 	lds	r30, 0x0200
    3f58:	f0 91 01 02 	lds	r31, 0x0201
    3f5c:	31 96       	adiw	r30, 0x01	; 1
    3f5e:	f0 93 01 02 	sts	0x0201, r31
    3f62:	e0 93 00 02 	sts	0x0200, r30
    3f66:	31 97       	sbiw	r30, 0x01	; 1
    3f68:	e4 91       	lpm	r30, Z+
    3f6a:	8e 2f       	mov	r24, r30
    3f6c:	19 d0       	rcall	.+50     	; 0x3fa0 <putch>
      while (--length);
    3f6e:	80 91 02 02 	lds	r24, 0x0202
    3f72:	81 50       	subi	r24, 0x01	; 1
    3f74:	80 93 02 02 	sts	0x0202, r24
    3f78:	88 23       	and	r24, r24
    3f7a:	61 f7       	brne	.-40     	; 0x3f54 <main+0x154>
    3f7c:	0e c0       	rjmp	.+28     	; 0x3f9a <main+0x19a>
#endif
#endif
    }

    /* Get device signature bytes  */
    else if(ch == STK_READ_SIGN) {
    3f7e:	85 37       	cpi	r24, 0x75	; 117
    3f80:	39 f4       	brne	.+14     	; 0x3f90 <main+0x190>
      // READ SIGN - return what Avrdude wants to hear
      verifySpace();
    3f82:	2e d0       	rcall	.+92     	; 0x3fe0 <verifySpace>
      putch(SIGNATURE_0);
    3f84:	8e e1       	ldi	r24, 0x1E	; 30
    3f86:	0c d0       	rcall	.+24     	; 0x3fa0 <putch>
      putch(SIGNATURE_1);
    3f88:	84 e9       	ldi	r24, 0x94	; 148
    3f8a:	0a d0       	rcall	.+20     	; 0x3fa0 <putch>
      putch(SIGNATURE_2);
    3f8c:	86 e0       	ldi	r24, 0x06	; 6
    3f8e:	8b cf       	rjmp	.-234    	; 0x3ea6 <main+0xa6>
    }
    else if (ch == 'Q') {
    3f90:	81 35       	cpi	r24, 0x51	; 81
    3f92:	11 f4       	brne	.+4      	; 0x3f98 <main+0x198>
      // Adaboot no-wait mod
      watchdogConfig(WATCHDOG_16MS);
    3f94:	88 e0       	ldi	r24, 0x08	; 8
    3f96:	19 d0       	rcall	.+50     	; 0x3fca <watchdogConfig>
      verifySpace();
    }
    else {
      // This covers the response to commands like STK_ENTER_PROGMODE
      verifySpace();
    3f98:	23 d0       	rcall	.+70     	; 0x3fe0 <verifySpace>
    }
    putch(STK_OK);
    3f9a:	80 e1       	ldi	r24, 0x10	; 16
    3f9c:	01 d0       	rcall	.+2      	; 0x3fa0 <putch>
    3f9e:	5c cf       	rjmp	.-328    	; 0x3e58 <main+0x58>

00003fa0 <putch>:
  }
}

void putch(char ch) {
    3fa0:	98 2f       	mov	r25, r24
#ifndef SOFT_UART
  while (!(UCSR0A & _BV(UDRE0)));
    3fa2:	80 91 c0 00 	lds	r24, 0x00C0
    3fa6:	85 ff       	sbrs	r24, 5
    3fa8:	fc cf       	rjmp	.-8      	; 0x3fa2 <putch+0x2>
  UDR0 = ch;
    3faa:	90 93 c6 00 	sts	0x00C6, r25
      [uartBit] "I" (UART_TX_BIT)
    :
      "r25"
  );
#endif
}
    3fae:	08 95       	ret

00003fb0 <getch>:
  return getch();
}

// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
  __asm__ __volatile__ (
    3fb0:	a8 95       	wdr
      [uartBit] "I" (UART_RX_BIT)
    :
      "r25"
);
#else
  while(!(UCSR0A & _BV(RXC0)));
    3fb2:	80 91 c0 00 	lds	r24, 0x00C0
    3fb6:	87 ff       	sbrs	r24, 7
    3fb8:	fc cf       	rjmp	.-8      	; 0x3fb2 <getch+0x2>
  ch = UDR0;
    3fba:	80 91 c6 00 	lds	r24, 0x00C6
  LED_PIN |= _BV(LED);
#endif
#endif

  return ch;
}
    3fbe:	08 95       	ret

00003fc0 <getLen>:
  } while (--count);
}
#endif

uint8_t getLen() {
  getch();
    3fc0:	f7 df       	rcall	.-18     	; 0x3fb0 <getch>
  length = getch();
    3fc2:	f6 df       	rcall	.-20     	; 0x3fb0 <getch>
    3fc4:	80 93 02 02 	sts	0x0202, r24
  return getch();
}
    3fc8:	f3 cf       	rjmp	.-26     	; 0x3fb0 <getch>

00003fca <watchdogConfig>:
    "wdr\n"
  );
}

void watchdogConfig(uint8_t x) {
  WDTCSR = _BV(WDCE) | _BV(WDE);
    3fca:	e0 e6       	ldi	r30, 0x60	; 96
    3fcc:	f0 e0       	ldi	r31, 0x00	; 0
    3fce:	98 e1       	ldi	r25, 0x18	; 24
    3fd0:	90 83       	st	Z, r25
  WDTCSR = x;
    3fd2:	80 83       	st	Z, r24
}
    3fd4:	08 95       	ret

00003fd6 <appStart>:

void appStart() {
  watchdogConfig(WATCHDOG_OFF);
    3fd6:	80 e0       	ldi	r24, 0x00	; 0
    3fd8:	f8 df       	rcall	.-16     	; 0x3fca <watchdogConfig>
  __asm__ __volatile__ (
    3fda:	ee 27       	eor	r30, r30
    3fdc:	ff 27       	eor	r31, r31
    3fde:	09 94       	ijmp

00003fe0 <verifySpace>:
  do getch(); while (--count);
  verifySpace();
}

void verifySpace() {
  if (getch() != CRC_EOP) appStart();
    3fe0:	e7 df       	rcall	.-50     	; 0x3fb0 <getch>
    3fe2:	80 32       	cpi	r24, 0x20	; 32
    3fe4:	09 f0       	breq	.+2      	; 0x3fe8 <verifySpace+0x8>
    3fe6:	f7 df       	rcall	.-18     	; 0x3fd6 <appStart>
  putch(STK_INSYNC);
    3fe8:	84 e1       	ldi	r24, 0x14	; 20
}
    3fea:	da cf       	rjmp	.-76     	; 0x3fa0 <putch>

00003fec <getNch>:
    ::[count] "M" (UART_B_VALUE)
  );
}
#endif

void getNch(uint8_t count) {
    3fec:	1f 93       	push	r17
    3fee:	18 2f       	mov	r17, r24
  do getch(); while (--count);
    3ff0:	df df       	rcall	.-66     	; 0x3fb0 <getch>
    3ff2:	11 50       	subi	r17, 0x01	; 1
    3ff4:	e9 f7       	brne	.-6      	; 0x3ff0 <getNch+0x4>
  verifySpace();
    3ff6:	f4 df       	rcall	.-24     	; 0x3fe0 <verifySpace>
}
    3ff8:	1f 91       	pop	r17
    3ffa:	08 95       	ret