From 5527c44aa443b20d63cf7a276180a36695233924 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Fri, 19 Jul 2013 16:20:34 +0200 Subject: WiFi library to the new format --- .../WiFiPachubeClientString.ino | 177 --------------------- 1 file changed, 177 deletions(-) delete mode 100644 libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino (limited to 'libraries/WiFi/examples/WiFiPachubeClientString') diff --git a/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino b/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino deleted file mode 100644 index 243fe83..0000000 --- a/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino +++ /dev/null @@ -1,177 +0,0 @@ -/* - Wifi Pachube sensor client with Strings - - This sketch connects an analog sensor to Pachube (http://www.pachube.com) - using a Arduino Wifi shield. - - This example is written for a network using WPA encryption. For - WEP or WPA, change the Wifi.begin() call accordingly. - - This example has been updated to use version 2.0 of the pachube.com API. - To make it work, create a feed with a datastream, and give it the ID - sensor1. Or change the code below to match your feed. - - This example uses the String library, which is part of the Arduino core from - version 0019. - - Circuit: - * Analog sensor attached to analog in 0 - * Wifi shield attached to pins 10, 11, 12, 13 - - created 16 Mar 2012 - modified 31 May 2012 - by Tom Igoe - modified 8 Sept 2012 - by Scott Fitzgerald - - This code is in the public domain. - - */ - -#include -#include - -#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here -#define FEEDID 00000 // replace your feed ID -#define USERAGENT "My Arduino Project" // user agent is the project name - -char ssid[] = "yourNetwork"; // your network SSID (name) -char pass[] = "secretPassword"; // your network password - -int status = WL_IDLE_STATUS; - -// initialize the library instance: -WiFiClient client; - -// if you don't want to use DNS (and reduce your sketch size) -// use the numeric IP instead of the name for the server: -//IPAddress server(216,52,233,121); // numeric IP for api.pachube.com -char server[] = "api.pachube.com"; // name address for pachube API - -unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds -boolean lastConnected = false; // state of the connection last time through the main loop -const unsigned long postingInterval = 10*1000; //delay between updates to pachube.com - -void setup() { - //Initialize serial and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - // check for the presence of the shield: - if (WiFi.status() == WL_NO_SHIELD) { - Serial.println("WiFi shield not present"); - // don't continue: - while(true); - } - - // attempt to connect to Wifi network: - while ( status != WL_CONNECTED) { - Serial.print("Attempting to connect to SSID: "); - Serial.println(ssid); - // Connect to WPA/WPA2 network. Change this line if using open or WEP network: - status = WiFi.begin(ssid, pass); - - // wait 10 seconds for connection: - delay(10000); - } - // you're connected now, so print out the status: - printWifiStatus(); -} - -void loop() { - // read the analog sensor: - int sensorReading = analogRead(A0); - // convert the data to a String to send it: - - String dataString = "sensor1,"; - dataString += sensorReading; - - // you can append multiple readings to this String if your - // pachube feed is set up to handle multiple values: - int otherSensorReading = analogRead(A1); - dataString += "\nsensor2,"; - dataString += otherSensorReading; - - // if there's incoming data from the net connection. - // send it out the serial port. This is for debugging - // purposes only: - while (client.available()) { - char c = client.read(); - Serial.print(c); - } - - // if there's no net connection, but there was one last time - // through the loop, then stop the client: - if (!client.connected() && lastConnected) { - Serial.println(); - Serial.println("disconnecting."); - client.stop(); - } - - // if you're not connected, and ten seconds have passed since - // your last connection, then connect again and send data: - if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { - sendData(dataString); - } - // store the state of the connection for next time through - // the loop: - lastConnected = client.connected(); -} - -// this method makes a HTTP connection to the server: -void sendData(String thisData) { - // if there's a successful connection: - if (client.connect(server, 80)) { - Serial.println("connecting..."); - // send the HTTP PUT request: - client.print("PUT /v2/feeds/"); - client.print(FEEDID); - client.println(".csv HTTP/1.1"); - client.println("Host: api.pachube.com"); - client.print("X-ApiKey: "); - client.println(APIKEY); - client.print("User-Agent: "); - client.println(USERAGENT); - client.print("Content-Length: "); - client.println(thisData.length()); - - // last pieces of the HTTP PUT request: - client.println("Content-Type: text/csv"); - client.println("Connection: close"); - client.println(); - - // here's the actual content of the PUT request: - client.println(thisData); - } - else { - // if you couldn't make a connection: - Serial.println("connection failed"); - Serial.println(); - Serial.println("disconnecting."); - client.stop(); - } - // note the time that the connection was made or attempted: - lastConnectionTime = millis(); -} - - -void printWifiStatus() { - // print the SSID of the network you're attached to: - Serial.print("SSID: "); - Serial.println(WiFi.SSID()); - - // print your WiFi shield's IP address: - IPAddress ip = WiFi.localIP(); - Serial.print("IP Address: "); - Serial.println(ip); - - // print the received signal strength: - long rssi = WiFi.RSSI(); - Serial.print("signal strength (RSSI):"); - Serial.print(rssi); - Serial.println(" dBm"); -} - - -- cgit v1.2.3-18-g5258