From 5527c44aa443b20d63cf7a276180a36695233924 Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Fri, 19 Jul 2013 16:20:34 +0200
Subject: WiFi library to the new format

---
 .../WiFi/examples/ScanNetworks/ScanNetworks.ino    | 119 ---------------------
 1 file changed, 119 deletions(-)
 delete mode 100644 libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino

(limited to 'libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino')

diff --git a/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino b/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino
deleted file mode 100644
index 93b3000..0000000
--- a/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- 
- This example  prints the Wifi shield's MAC address, and
- scans for available Wifi networks using the Wifi shield.
- Every ten seconds, it scans again. It doesn't actually 
- connect to any network, so no encryption scheme is specified.
- 
- Circuit:
- * WiFi shield attached
- 
- created 13 July 2010
- by dlf (Metodo2 srl)
- modified 21 Junn 2012
- by Tom Igoe and Jaymes Dec
- */
-
-
-#include <SPI.h>
-#include <WiFi.h>
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-
-  // Print WiFi MAC address:
-  printMacAddress();
-
-  // scan for existing networks:
-  Serial.println("Scanning available networks...");
-  listNetworks();
-}
-
-void loop() {
-  delay(10000);
-  // scan for existing networks:
-  Serial.println("Scanning available networks...");
-  listNetworks();
-}
-
-void printMacAddress() {
-  // the MAC address of your Wifi shield
-  byte mac[6];                     
-
-  // print your MAC address:
-  WiFi.macAddress(mac);
-  Serial.print("MAC: ");
-  Serial.print(mac[5],HEX);
-  Serial.print(":");
-  Serial.print(mac[4],HEX);
-  Serial.print(":");
-  Serial.print(mac[3],HEX);
-  Serial.print(":");
-  Serial.print(mac[2],HEX);
-  Serial.print(":");
-  Serial.print(mac[1],HEX);
-  Serial.print(":");
-  Serial.println(mac[0],HEX);
-}
-
-void listNetworks() {
-  // scan for nearby networks:
-  Serial.println("** Scan Networks **");
-  int numSsid = WiFi.scanNetworks();
-  if (numSsid == -1)
-  { 
-    Serial.println("Couldn't get a wifi connection");
-    while(true);
-  } 
-
-  // print the list of networks seen:
-  Serial.print("number of available networks:");
-  Serial.println(numSsid);
-
-  // print the network number and name for each network found:
-  for (int thisNet = 0; thisNet<numSsid; thisNet++) {
-    Serial.print(thisNet);
-    Serial.print(") ");
-    Serial.print(WiFi.SSID(thisNet));
-    Serial.print("\tSignal: ");
-    Serial.print(WiFi.RSSI(thisNet));
-    Serial.print(" dBm");
-    Serial.print("\tEncryption: ");
-    printEncryptionType(WiFi.encryptionType(thisNet));
-  }
-}
-
-void printEncryptionType(int thisType) {
-  // read the encryption type and print out the name:
-  switch (thisType) {
-  case ENC_TYPE_WEP:
-    Serial.println("WEP");
-    break;
-  case ENC_TYPE_TKIP:
-    Serial.println("WPA");
-    break;
-  case ENC_TYPE_CCMP:
-    Serial.println("WPA2");
-    break;
-  case ENC_TYPE_NONE:
-    Serial.println("None");
-    break;
-  case ENC_TYPE_AUTO:
-    Serial.println("Auto");
-    break;
-  } 
-}
-
-
-
-- 
cgit v1.2.3-18-g5258