From cb3003082e7e140850071eba914c0b4347bc3bf1 Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Wed, 3 Jul 2013 16:25:45 +0200
Subject: TFT library to new format

---
 .../Arduino/TFTBitmapLogo/TFTBitmapLogo.ino        | 108 ---------------------
 1 file changed, 108 deletions(-)
 delete mode 100644 libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino

(limited to 'libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino')

diff --git a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino b/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
deleted file mode 100644
index da7a94d..0000000
--- a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-
- Arduino TFT Bitmap Logo example
- 
- This example reads an image file from a micro-SD card
- and draws it on the screen, at random locations.
- 
- In this sketch, the Arduino logo is read from a micro-SD card.
- There is a .bmp file included with this sketch. 
- - open the sketch folder (Ctrl-K or Cmd-K)
- - copy the "arduino.bmp" file to a micro-SD
- - put the SD into the SD slot of the Arduino TFT module.
- 
- This example code is in the public domain.
- 
- Created 19 April 2013 by Enrico Gueli
- 
- http://arduino.cc/en/Tutorial/TFTBitmapLogo
- 
- */
- 
-// include the necessary libraries
-#include <SPI.h>
-#include <SD.h>
-#include <TFT.h>  // Arduino LCD library
-
-// pin definition for the Uno
-#define sd_cs  4
-#define lcd_cs 10
-#define dc     9
-#define rst    8  
-
-// pin definition for the Leonardo
-//#define sd_cs  8
-//#define lcd_cs 7
-//#define dc     0
-//#define rst    1  
-
-TFT TFTscreen = TFT(lcd_cs, dc, rst);
-
-// this variable represents the image to be drawn on screen
-PImage logo;
-
-
-void setup() {
-  // initialize the GLCD and show a message
-  // asking the user to open the serial line
-  TFTscreen.begin();
-  TFTscreen.background(255, 255, 255);
-
-  TFTscreen.stroke(0, 0, 255);
-  TFTscreen.println();
-  TFTscreen.println("Arduino TFT Bitmap Example");
-  TFTscreen.stroke(0, 0, 0);
-  TFTscreen.println("Open serial monitor");
-  TFTscreen.println("to run the sketch");
-
-  // initialize the serial port: it will be used to 
-  // print some diagnostic info  
-  Serial.begin(9600);
-  while (!Serial) {
-    // wait for serial line to be ready
-  }
-
-  // clear the GLCD screen before starting
-  TFTscreen.background(255, 255, 255);
-  
-  // try to access the SD card. If that fails (e.g.
-  // no card present), the setup process will stop.
-  Serial.print("Initializing SD card...");
-  if (!SD.begin(sd_cs)) {
-    Serial.println("failed!");
-    return;
-  }
-  Serial.println("OK!");
-  
-  // initialize and clear the GLCD screen
-  TFTscreen.begin();
-  TFTscreen.background(255, 255, 255);
-
-  // now that the SD card can be access, try to load the
-  // image file.
-  logo = TFTscreen.loadImage("arduino.bmp");
-  if (!logo.isValid()) {
-    Serial.println("error while loading arduino.bmp");
-  }
-}
-
-void loop() {
-  // don't do anything if the image wasn't loaded correctly.
-  if (logo.isValid() == false) {
-    return;
-  }
-  
-  Serial.println("drawing image");
-
-  // get a random location where to draw the image.
-  // To avoid the image to be draw outside the screen,
-  // take into account the image size.
-  int x = random(TFTscreen.width() - logo.width());
-  int y = random(TFTscreen.height() - logo.height());
-
-  // draw the image to the screen
-  TFTscreen.image(logo, x, y);
-
-  // wait a little bit before drawing again
-  delay(1500);
-}
-- 
cgit v1.2.3-18-g5258