From e01b23840354acd6c260b1f552bf0c5f5d7cdede Mon Sep 17 00:00:00 2001 From: Fede85 Date: Thu, 27 Jun 2013 19:24:16 +0200 Subject: Stepper library to the new format --- .../stepper_oneRevolution.ino | 44 ---------------------- 1 file changed, 44 deletions(-) delete mode 100644 libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino (limited to 'libraries/Stepper/examples/stepper_oneRevolution') diff --git a/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino b/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino deleted file mode 100644 index 2dbb57d..0000000 --- a/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino +++ /dev/null @@ -1,44 +0,0 @@ - -/* - Stepper Motor Control - one revolution - - This program drives a unipolar or bipolar stepper motor. - The motor is attached to digital pins 8 - 11 of the Arduino. - - The motor should revolve one revolution in one direction, then - one revolution in the other direction. - - - Created 11 Mar. 2007 - Modified 30 Nov. 2009 - by Tom Igoe - - */ - -#include - -const int stepsPerRevolution = 200; // change this to fit the number of steps per revolution - // for your motor - -// initialize the stepper library on pins 8 through 11: -Stepper myStepper(stepsPerRevolution, 8,9,10,11); - -void setup() { - // set the speed at 60 rpm: - myStepper.setSpeed(60); - // initialize the serial port: - Serial.begin(9600); -} - -void loop() { - // step one revolution in one direction: - Serial.println("clockwise"); - myStepper.step(stepsPerRevolution); - delay(500); - - // step one revolution in the other direction: - Serial.println("counterclockwise"); - myStepper.step(-stepsPerRevolution); - delay(500); -} - -- cgit v1.2.3-18-g5258