From e01b23840354acd6c260b1f552bf0c5f5d7cdede Mon Sep 17 00:00:00 2001 From: Fede85 Date: Thu, 27 Jun 2013 19:24:16 +0200 Subject: Stepper library to the new format --- libraries/Stepper/examples/MotorKnob/MotorKnob.ino | 41 ---------------------- 1 file changed, 41 deletions(-) delete mode 100644 libraries/Stepper/examples/MotorKnob/MotorKnob.ino (limited to 'libraries/Stepper/examples/MotorKnob/MotorKnob.ino') diff --git a/libraries/Stepper/examples/MotorKnob/MotorKnob.ino b/libraries/Stepper/examples/MotorKnob/MotorKnob.ino deleted file mode 100644 index d428186..0000000 --- a/libraries/Stepper/examples/MotorKnob/MotorKnob.ino +++ /dev/null @@ -1,41 +0,0 @@ -/* - * MotorKnob - * - * A stepper motor follows the turns of a potentiometer - * (or other sensor) on analog input 0. - * - * http://www.arduino.cc/en/Reference/Stepper - * This example code is in the public domain. - */ - -#include - -// change this to the number of steps on your motor -#define STEPS 100 - -// create an instance of the stepper class, specifying -// the number of steps of the motor and the pins it's -// attached to -Stepper stepper(STEPS, 8, 9, 10, 11); - -// the previous reading from the analog input -int previous = 0; - -void setup() -{ - // set the speed of the motor to 30 RPMs - stepper.setSpeed(30); -} - -void loop() -{ - // get the sensor value - int val = analogRead(0); - - // move a number of steps equal to the change in the - // sensor reading - stepper.step(val - previous); - - // remember the previous value of the sensor - previous = val; -} \ No newline at end of file -- cgit v1.2.3-18-g5258