From f40a546151183f58ce5d801283134e9f7b070a07 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 3 Jul 2013 23:18:21 +0200 Subject: SoftwareSerial library to the new format --- .../SoftwareSerialExample.ino | 55 ------------- .../examples/TwoPortReceive/TwoPortReceive.ino | 93 ---------------------- 2 files changed, 148 deletions(-) delete mode 100644 libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino delete mode 100644 libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino (limited to 'libraries/SoftwareSerial/examples') diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino deleted file mode 100644 index 6101bb1..0000000 --- a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino +++ /dev/null @@ -1,55 +0,0 @@ -/* - Software serial multple serial test - - Receives from the hardware serial, sends to software serial. - Receives from software serial, sends to hardware serial. - - The circuit: - * RX is digital pin 10 (connect to TX of other device) - * TX is digital pin 11 (connect to RX of other device) - - Note: - Not all pins on the Mega and Mega 2560 support change interrupts, - so only the following can be used for RX: - 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 - - Not all pins on the Leonardo support change interrupts, - so only the following can be used for RX: - 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). - - created back in the mists of time - modified 25 May 2012 - by Tom Igoe - based on Mikal Hart's example - - This example code is in the public domain. - - */ -#include - -SoftwareSerial mySerial(10, 11); // RX, TX - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(57600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.println("Goodnight moon!"); - - // set the data rate for the SoftwareSerial port - mySerial.begin(4800); - mySerial.println("Hello, world?"); -} - -void loop() // run over and over -{ - if (mySerial.available()) - Serial.write(mySerial.read()); - if (Serial.available()) - mySerial.write(Serial.read()); -} - diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino deleted file mode 100644 index d607ee6..0000000 --- a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino +++ /dev/null @@ -1,93 +0,0 @@ -/* - Software serial multple serial test - - Receives from the two software serial ports, - sends to the hardware serial port. - - In order to listen on a software port, you call port.listen(). - When using two software serial ports, you have to switch ports - by listen()ing on each one in turn. Pick a logical time to switch - ports, like the end of an expected transmission, or when the - buffer is empty. This example switches ports when there is nothing - more to read from a port - - The circuit: - Two devices which communicate serially are needed. - * First serial device's TX attached to digital pin 2, RX to pin 3 - * Second serial device's TX attached to digital pin 4, RX to pin 5 - - Note: - Not all pins on the Mega and Mega 2560 support change interrupts, - so only the following can be used for RX: - 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 - - Not all pins on the Leonardo support change interrupts, - so only the following can be used for RX: - 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). - - created 18 Apr. 2011 - modified 25 May 2012 - by Tom Igoe - based on Mikal Hart's twoPortRXExample - - This example code is in the public domain. - - */ - -#include -// software serial #1: TX = digital pin 10, RX = digital pin 11 -SoftwareSerial portOne(10,11); - -// software serial #2: TX = digital pin 8, RX = digital pin 9 -// on the Mega, use other pins instead, since 8 and 9 don't work on the Mega -SoftwareSerial portTwo(8,9); - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - // Start each software serial port - portOne.begin(9600); - portTwo.begin(9600); -} - -void loop() -{ - // By default, the last intialized port is listening. - // when you want to listen on a port, explicitly select it: - portOne.listen(); - Serial.println("Data from port one:"); - // while there is data coming in, read it - // and send to the hardware serial port: - while (portOne.available() > 0) { - char inByte = portOne.read(); - Serial.write(inByte); - } - - // blank line to separate data from the two ports: - Serial.println(); - - // Now listen on the second port - portTwo.listen(); - // while there is data coming in, read it - // and send to the hardware serial port: - Serial.println("Data from port two:"); - while (portTwo.available() > 0) { - char inByte = portTwo.read(); - Serial.write(inByte); - } - - // blank line to separate data from the two ports: - Serial.println(); -} - - - - - - -- cgit v1.2.3-18-g5258