From f40a546151183f58ce5d801283134e9f7b070a07 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 3 Jul 2013 23:18:21 +0200 Subject: SoftwareSerial library to the new format --- .../SoftwareSerialExample.ino | 55 ---------------------- 1 file changed, 55 deletions(-) delete mode 100644 libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino (limited to 'libraries/SoftwareSerial/examples/SoftwareSerialExample') diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino deleted file mode 100644 index 6101bb1..0000000 --- a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino +++ /dev/null @@ -1,55 +0,0 @@ -/* - Software serial multple serial test - - Receives from the hardware serial, sends to software serial. - Receives from software serial, sends to hardware serial. - - The circuit: - * RX is digital pin 10 (connect to TX of other device) - * TX is digital pin 11 (connect to RX of other device) - - Note: - Not all pins on the Mega and Mega 2560 support change interrupts, - so only the following can be used for RX: - 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 - - Not all pins on the Leonardo support change interrupts, - so only the following can be used for RX: - 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). - - created back in the mists of time - modified 25 May 2012 - by Tom Igoe - based on Mikal Hart's example - - This example code is in the public domain. - - */ -#include - -SoftwareSerial mySerial(10, 11); // RX, TX - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(57600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.println("Goodnight moon!"); - - // set the data rate for the SoftwareSerial port - mySerial.begin(4800); - mySerial.println("Hello, world?"); -} - -void loop() // run over and over -{ - if (mySerial.available()) - Serial.write(mySerial.read()); - if (Serial.available()) - mySerial.write(Serial.read()); -} - -- cgit v1.2.3-18-g5258