From 5abc6d147f2e834fe310388d3197bf184bdd4cb7 Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Thu, 27 Jun 2013 13:12:07 +0200
Subject: Servo library to the new format

---
 libraries/Servo/examples/Knob/Knob.ino   | 22 ----------------------
 libraries/Servo/examples/Sweep/Sweep.ino | 31 -------------------------------
 2 files changed, 53 deletions(-)
 delete mode 100644 libraries/Servo/examples/Knob/Knob.ino
 delete mode 100644 libraries/Servo/examples/Sweep/Sweep.ino

(limited to 'libraries/Servo/examples')

diff --git a/libraries/Servo/examples/Knob/Knob.ino b/libraries/Servo/examples/Knob/Knob.ino
deleted file mode 100644
index 886e107..0000000
--- a/libraries/Servo/examples/Knob/Knob.ino
+++ /dev/null
@@ -1,22 +0,0 @@
-// Controlling a servo position using a potentiometer (variable resistor) 
-// by Michal Rinott <http://people.interaction-ivrea.it/m.rinott> 
-
-#include <Servo.h> 
- 
-Servo myservo;  // create servo object to control a servo 
- 
-int potpin = 0;  // analog pin used to connect the potentiometer
-int val;    // variable to read the value from the analog pin 
- 
-void setup() 
-{ 
-  myservo.attach(9);  // attaches the servo on pin 9 to the servo object 
-} 
- 
-void loop() 
-{ 
-  val = analogRead(potpin);            // reads the value of the potentiometer (value between 0 and 1023) 
-  val = map(val, 0, 1023, 0, 179);     // scale it to use it with the servo (value between 0 and 180) 
-  myservo.write(val);                  // sets the servo position according to the scaled value 
-  delay(15);                           // waits for the servo to get there 
-} 
diff --git a/libraries/Servo/examples/Sweep/Sweep.ino b/libraries/Servo/examples/Sweep/Sweep.ino
deleted file mode 100644
index fb326e7..0000000
--- a/libraries/Servo/examples/Sweep/Sweep.ino
+++ /dev/null
@@ -1,31 +0,0 @@
-// Sweep
-// by BARRAGAN <http://barraganstudio.com> 
-// This example code is in the public domain.
-
-
-#include <Servo.h> 
- 
-Servo myservo;  // create servo object to control a servo 
-                // a maximum of eight servo objects can be created 
- 
-int pos = 0;    // variable to store the servo position 
- 
-void setup() 
-{ 
-  myservo.attach(9);  // attaches the servo on pin 9 to the servo object 
-} 
- 
- 
-void loop() 
-{ 
-  for(pos = 0; pos < 180; pos += 1)  // goes from 0 degrees to 180 degrees 
-  {                                  // in steps of 1 degree 
-    myservo.write(pos);              // tell servo to go to position in variable 'pos' 
-    delay(15);                       // waits 15ms for the servo to reach the position 
-  } 
-  for(pos = 180; pos>=1; pos-=1)     // goes from 180 degrees to 0 degrees 
-  {                                
-    myservo.write(pos);              // tell servo to go to position in variable 'pos' 
-    delay(15);                       // waits 15ms for the servo to reach the position 
-  } 
-} 
-- 
cgit v1.2.3-18-g5258