From 0887b98f627500271b5ad8b3c4f6c7b90bc227ee Mon Sep 17 00:00:00 2001
From: Thibaut VIARD <thibaut.viard@atmel.com>
Date: Tue, 21 Jun 2011 00:20:43 +0200
Subject: Moving all AVR specific libraries to hardware/avr

---
 libraries/Servo/examples/Knob/Knob.pde   | 22 ++++++++++++++++++++++
 libraries/Servo/examples/Sweep/Sweep.pde | 31 +++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 libraries/Servo/examples/Knob/Knob.pde
 create mode 100644 libraries/Servo/examples/Sweep/Sweep.pde

(limited to 'libraries/Servo/examples')

diff --git a/libraries/Servo/examples/Knob/Knob.pde b/libraries/Servo/examples/Knob/Knob.pde
new file mode 100644
index 0000000..886e107
--- /dev/null
+++ b/libraries/Servo/examples/Knob/Knob.pde
@@ -0,0 +1,22 @@
+// Controlling a servo position using a potentiometer (variable resistor) 
+// by Michal Rinott <http://people.interaction-ivrea.it/m.rinott> 
+
+#include <Servo.h> 
+ 
+Servo myservo;  // create servo object to control a servo 
+ 
+int potpin = 0;  // analog pin used to connect the potentiometer
+int val;    // variable to read the value from the analog pin 
+ 
+void setup() 
+{ 
+  myservo.attach(9);  // attaches the servo on pin 9 to the servo object 
+} 
+ 
+void loop() 
+{ 
+  val = analogRead(potpin);            // reads the value of the potentiometer (value between 0 and 1023) 
+  val = map(val, 0, 1023, 0, 179);     // scale it to use it with the servo (value between 0 and 180) 
+  myservo.write(val);                  // sets the servo position according to the scaled value 
+  delay(15);                           // waits for the servo to get there 
+} 
diff --git a/libraries/Servo/examples/Sweep/Sweep.pde b/libraries/Servo/examples/Sweep/Sweep.pde
new file mode 100644
index 0000000..fb326e7
--- /dev/null
+++ b/libraries/Servo/examples/Sweep/Sweep.pde
@@ -0,0 +1,31 @@
+// Sweep
+// by BARRAGAN <http://barraganstudio.com> 
+// This example code is in the public domain.
+
+
+#include <Servo.h> 
+ 
+Servo myservo;  // create servo object to control a servo 
+                // a maximum of eight servo objects can be created 
+ 
+int pos = 0;    // variable to store the servo position 
+ 
+void setup() 
+{ 
+  myservo.attach(9);  // attaches the servo on pin 9 to the servo object 
+} 
+ 
+ 
+void loop() 
+{ 
+  for(pos = 0; pos < 180; pos += 1)  // goes from 0 degrees to 180 degrees 
+  {                                  // in steps of 1 degree 
+    myservo.write(pos);              // tell servo to go to position in variable 'pos' 
+    delay(15);                       // waits 15ms for the servo to reach the position 
+  } 
+  for(pos = 180; pos>=1; pos-=1)     // goes from 180 degrees to 0 degrees 
+  {                                
+    myservo.write(pos);              // tell servo to go to position in variable 'pos' 
+    delay(15);                       // waits 15ms for the servo to reach the position 
+  } 
+} 
-- 
cgit v1.2.3-18-g5258