From 8b327d7bede1c1245db99daeba4e168c92c11194 Mon Sep 17 00:00:00 2001 From: per1234 Date: Wed, 26 May 2021 04:35:59 -0700 Subject: Correct typos in comments and documentation --- .../examples/BarometricPressureSensor/BarometricPressureSensor.ino | 3 +-- libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino | 6 +++--- libraries/SPI/src/SPI.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'libraries/SPI') diff --git a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino index df73ade..1b8ad70 100644 --- a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino +++ b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino @@ -43,7 +43,7 @@ void setup() { // start the SPI library: SPI.begin(); - // initalize the data ready and chip select pins: + // initialize the data ready and chip select pins: pinMode(dataReadyPin, INPUT); pinMode(chipSelectPin, OUTPUT); @@ -140,4 +140,3 @@ void writeRegister(byte thisRegister, byte thisValue) { // take the chip select high to de-select: digitalWrite(chipSelectPin, HIGH); } - diff --git a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino index 8719058..39e5bf9 100644 --- a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino +++ b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino @@ -14,7 +14,7 @@ The circuit: * All A pins of AD5206 connected to +5V * All B pins of AD5206 connected to ground - * An LED and a 220-ohm resisor in series connected from each W pin to ground + * An LED and a 220-ohm resistor in series connected from each W pin to ground * CS - to digital pin 10 (SS pin) * SDI - to digital pin 11 (MOSI pin) * CLK - to digital pin 13 (SCK pin) @@ -27,7 +27,7 @@ */ -// inslude the SPI library: +// include the SPI library: #include @@ -64,7 +64,7 @@ void digitalPotWrite(int address, int value) { // take the SS pin low to select the chip: digitalWrite(slaveSelectPin, LOW); delay(100); - // send in the address and value via SPI: + // send in the address and value via SPI: SPI.transfer(address); SPI.transfer(value); delay(100); diff --git a/libraries/SPI/src/SPI.h b/libraries/SPI/src/SPI.h index 5206a09..1e37079 100644 --- a/libraries/SPI/src/SPI.h +++ b/libraries/SPI/src/SPI.h @@ -106,7 +106,7 @@ private: // slowest (128 == 2 ^^ 7, so clock_div = 6). uint8_t clockDiv; - // When the clock is known at compiletime, use this if-then-else + // When the clock is known at compile time, use this if-then-else // cascade, which the compiler knows how to completely optimize // away. When clock is not known, use a loop instead, which generates // shorter code. -- cgit v1.2.3-18-g5258