From 5f8b79d4e2b1398cd5a39ba841fb5a0de0c2078c Mon Sep 17 00:00:00 2001
From: Cristian Maglie <c.maglie@bug.st>
Date: Mon, 24 Sep 2012 12:42:23 +0200
Subject: Moved SD lib into root libraries folder

---
 libraries/SD/examples/ReadWrite/ReadWrite.ino | 85 ---------------------------
 1 file changed, 85 deletions(-)
 delete mode 100644 libraries/SD/examples/ReadWrite/ReadWrite.ino

(limited to 'libraries/SD/examples/ReadWrite')

diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino
deleted file mode 100644
index 5805fc8..0000000
--- a/libraries/SD/examples/ReadWrite/ReadWrite.ino
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-  SD card read/write
- 
- This example shows how to read and write data to and from an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
- 
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-   pinMode(10, OUTPUT);
-   
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  myFile = SD.open("test.txt", FILE_WRITE);
-  
-  // if the file opened okay, write to it:
-  if (myFile) {
-    Serial.print("Writing to test.txt...");
-    myFile.println("testing 1, 2, 3.");
-	// close the file:
-    myFile.close();
-    Serial.println("done.");
-  } else {
-    // if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-  
-  // re-open the file for reading:
-  myFile = SD.open("test.txt");
-  if (myFile) {
-    Serial.println("test.txt:");
-    
-    // read from the file until there's nothing else in it:
-    while (myFile.available()) {
-    	Serial.write(myFile.read());
-    }
-    // close the file:
-    myFile.close();
-  } else {
-  	// if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-}
-
-void loop()
-{
-	// nothing happens after setup
-}
-
-
-- 
cgit v1.2.3-18-g5258