From 5f8b79d4e2b1398cd5a39ba841fb5a0de0c2078c Mon Sep 17 00:00:00 2001
From: Cristian Maglie <c.maglie@bug.st>
Date: Mon, 24 Sep 2012 12:42:23 +0200
Subject: Moved SD lib into root libraries folder

---
 libraries/SD/examples/DumpFile/DumpFile.ino | 73 -----------------------------
 1 file changed, 73 deletions(-)
 delete mode 100644 libraries/SD/examples/DumpFile/DumpFile.ino

(limited to 'libraries/SD/examples/DumpFile/DumpFile.ino')

diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino
deleted file mode 100644
index d83089a..0000000
--- a/libraries/SD/examples/DumpFile/DumpFile.ino
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-  SD card file dump
- 
- This example shows how to read a file from the SD card using the
- SD library and send it over the serial port.
- 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created  22 December 2010
- by Limor Fried
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <SD.h>
-
-// On the Ethernet Shield, CS is pin 4. Note that even if it's not
-// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
-// 53 on the Mega) must be left as an output or the SD library
-// functions will not work.
-const int chipSelect = 4;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // make sure that the default chip select pin is set to
-  // output, even if you don't use it:
-  pinMode(10, OUTPUT);
-  
-  // see if the card is present and can be initialized:
-  if (!SD.begin(chipSelect)) {
-    Serial.println("Card failed, or not present");
-    // don't do anything more:
-    return;
-  }
-  Serial.println("card initialized.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  File dataFile = SD.open("datalog.txt");
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    while (dataFile.available()) {
-      Serial.write(dataFile.read());
-    }
-    dataFile.close();
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-}
-
-void loop()
-{
-}
-
-- 
cgit v1.2.3-18-g5258