From fd8c367304fe62a107332db19880c88f9ac0d082 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 3 Jul 2013 22:00:02 +0200 Subject: SPI library to the new format and moved Robot_Motor and Robot_Control libraries --- libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp | 265 ----------------------- 1 file changed, 265 deletions(-) delete mode 100644 libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp (limited to 'libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp') diff --git a/libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp b/libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp deleted file mode 100644 index 7740a06..0000000 --- a/libraries/Robot_Motor/ArduinoRobotMotorBoard.cpp +++ /dev/null @@ -1,265 +0,0 @@ -#include "ArduinoRobotMotorBoard.h" -#include "EasyTransfer2.h" -#include "Multiplexer.h" -#include "LineFollow.h" - -RobotMotorBoard::RobotMotorBoard(){ - //LineFollow::LineFollow(); -} -/*void RobotMotorBoard::beginIRReceiver(){ - IRrecv::enableIRIn(); -}*/ -void RobotMotorBoard::begin(){ - //initialze communication - Serial1.begin(9600); - messageIn.begin(&Serial1); - messageOut.begin(&Serial1); - - //init MUX - uint8_t MuxPins[]={MUXA,MUXB,MUXC}; - this->IRs.begin(MuxPins,MUX_IN,3); - pinMode(MUXI,INPUT); - digitalWrite(MUXI,LOW); - - isPaused=false; -} - -void RobotMotorBoard::process(){ - if(isPaused)return;//skip process if the mode is paused - - if(mode==MODE_SIMPLE){ - //Serial.println("s"); - //do nothing? Simple mode is just about getting commands - }else if(mode==MODE_LINE_FOLLOW){ - //do line following stuff here. - LineFollow::runLineFollow(); - }else if(mode==MODE_ADJUST_MOTOR){ - //Serial.println('a'); - //motorAdjustment=analogRead(POT); - //setSpeed(255,255); - //delay(100); - } -} -void RobotMotorBoard::pauseMode(bool onOff){ - if(onOff){ - isPaused=true; - }else{ - isPaused=false; - } - stopCurrentActions(); - -} -void RobotMotorBoard::parseCommand(){ - uint8_t modeName; - uint8_t codename; - int value; - int speedL; - int speedR; - if(this->messageIn.receiveData()){ - //Serial.println("data received"); - uint8_t command=messageIn.readByte(); - //Serial.println(command); - switch(command){ - case COMMAND_SWITCH_MODE: - modeName=messageIn.readByte(); - setMode(modeName); - break; - case COMMAND_RUN: - if(mode==MODE_LINE_FOLLOW)break;//in follow line mode, the motor does not follow commands - speedL=messageIn.readInt(); - speedR=messageIn.readInt(); - motorsWrite(speedL,speedR); - break; - case COMMAND_MOTORS_STOP: - motorsStop(); - break; - case COMMAND_ANALOG_WRITE: - codename=messageIn.readByte(); - value=messageIn.readInt(); - _analogWrite(codename,value); - break; - case COMMAND_DIGITAL_WRITE: - codename=messageIn.readByte(); - value=messageIn.readByte(); - _digitalWrite(codename,value); - break; - case COMMAND_ANALOG_READ: - codename=messageIn.readByte(); - _analogRead(codename); - break; - case COMMAND_DIGITAL_READ: - codename=messageIn.readByte(); - _digitalRead(codename); - break; - case COMMAND_READ_IR: - _readIR(); - break; - case COMMAND_READ_TRIM: - _readTrim(); - break; - case COMMAND_PAUSE_MODE: - pauseMode(messageIn.readByte());//onOff state - break; - case COMMAND_LINE_FOLLOW_CONFIG: - LineFollow::config( - messageIn.readByte(), //KP - messageIn.readByte(), //KD - messageIn.readByte(), //robotSpeed - messageIn.readByte() //IntegrationTime - ); - break; - } - } - //delay(5); -} -uint8_t RobotMotorBoard::parseCodename(uint8_t codename){ - switch(codename){ - case B_TK1: - return TK1; - case B_TK2: - return TK2; - case B_TK3: - return TK3; - case B_TK4: - return TK4; - } -} -uint8_t RobotMotorBoard::codenameToAPin(uint8_t codename){ - switch(codename){ - case B_TK1: - return A0; - case B_TK2: - return A1; - case B_TK3: - return A6; - case B_TK4: - return A11; - } -} - -void RobotMotorBoard::setMode(uint8_t mode){ - if(mode==MODE_LINE_FOLLOW){ - LineFollow::calibIRs(); - } - /*if(mode==SET_MOTOR_ADJUSTMENT){ - save_motor_adjustment_to_EEPROM(); - } - */ - /*if(mode==MODE_IR_CONTROL){ - beginIRReceiver(); - }*/ - this->mode=mode; - //stopCurrentActions();//If line following, this should stop the motors -} - -void RobotMotorBoard::stopCurrentActions(){ - motorsStop(); - //motorsWrite(0,0); -} - -void RobotMotorBoard::motorsWrite(int speedL, int speedR){ - /*Serial.print(speedL); - Serial.print(" "); - Serial.println(speedR);*/ - //motor adjustment, using percentage - _refreshMotorAdjustment(); - - if(motorAdjustment<0){ - speedR*=(1+motorAdjustment); - }else{ - speedL*=(1-motorAdjustment); - } - - if(speedL>0){ - analogWrite(IN_A1,speedL); - analogWrite(IN_A2,0); - }else{ - analogWrite(IN_A1,0); - analogWrite(IN_A2,-speedL); - } - - if(speedR>0){ - analogWrite(IN_B1,speedR); - analogWrite(IN_B2,0); - }else{ - analogWrite(IN_B1,0); - analogWrite(IN_B2,-speedR); - } -} -void RobotMotorBoard::motorsWritePct(int speedLpct, int speedRpct){ - //speedLpct, speedRpct ranges from -100 to 100 - motorsWrite(speedLpct*2.55,speedRpct*2.55); -} -void RobotMotorBoard::motorsStop(){ - analogWrite(IN_A1,255); - analogWrite(IN_A2,255); - - analogWrite(IN_B1,255); - analogWrite(IN_B2,255); -} - - -/* -* -* -* Input and Output ports -* -* -*/ -void RobotMotorBoard::_digitalWrite(uint8_t codename,bool value){ - uint8_t pin=parseCodename(codename); - digitalWrite(pin,value); -} -void RobotMotorBoard::_analogWrite(uint8_t codename,int value){ - //There's no PWM available on motor board -} -void RobotMotorBoard::_digitalRead(uint8_t codename){ - uint8_t pin=parseCodename(codename); - bool value=digitalRead(pin); - messageOut.writeByte(COMMAND_DIGITAL_READ_RE); - messageOut.writeByte(codename); - messageOut.writeByte(value); - messageOut.sendData(); -} -void RobotMotorBoard::_analogRead(uint8_t codename){ - uint8_t pin=codenameToAPin(codename); - int value=analogRead(pin); - messageOut.writeByte(COMMAND_ANALOG_READ_RE); - messageOut.writeByte(codename); - messageOut.writeInt(value); - messageOut.sendData(); -} -int RobotMotorBoard::IRread(uint8_t num){ - IRs.selectPin(num-1); //To make consistant with the pins labeled on the board - return IRs.getAnalogValue(); -} - -void RobotMotorBoard::_readIR(){ - //Serial.println("readIR"); - int value; - messageOut.writeByte(COMMAND_READ_IR_RE); - for(int i=1;i<6;i++){ - value=IRread(i); - messageOut.writeInt(value); - } - messageOut.sendData(); -} - -void RobotMotorBoard::_readTrim(){ - int value=analogRead(TRIM); - messageOut.writeByte(COMMAND_READ_TRIM_RE); - messageOut.writeInt(value); - messageOut.sendData(); -} - -void RobotMotorBoard::_refreshMotorAdjustment(){ - motorAdjustment=map(analogRead(TRIM),0,1023,-30,30)/100.0; -} - -void RobotMotorBoard::reportActionDone(){ - setMode(MODE_SIMPLE); - messageOut.writeByte(COMMAND_ACTION_DONE); - messageOut.sendData(); -} - -RobotMotorBoard RobotMotor=RobotMotorBoard(); \ No newline at end of file -- cgit v1.2.3-18-g5258