From fd8c367304fe62a107332db19880c88f9ac0d082 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 3 Jul 2013 22:00:02 +0200 Subject: SPI library to the new format and moved Robot_Motor and Robot_Control libraries --- .../learn/keyboardTest/keyboardTest.ino.orig | 49 ---------------------- 1 file changed, 49 deletions(-) delete mode 100644 libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig (limited to 'libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig') diff --git a/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig b/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig deleted file mode 100644 index 6ee6c05..0000000 --- a/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig +++ /dev/null @@ -1,49 +0,0 @@ -/* - Keyboard Test - - Check how the robot's keyboard works. This example - sends the data about the key pressed through the - serial port. - - All the buttons on the Control Board are tied up to a - single analog input pin, in this way it is possible to multiplex a - whole series of buttons on one single pin. - - It is possible to recalibrate the thresholds of the buttons using - the Robot.keyboardCalibrate() function, that takes a 5 ints long - array as parameter - - Circuit: - * Arduino Robot - - created 1 May 2013 - by X. Yang - modified 12 May 2013 - by D. Cuartielles - - This example is in the public domain - */ - -#include - -<<<<<<< HEAD -// it is possible to use an array to calibrate -//int vals[] = { 0, 133, 305, 481, 724 }; - -void setup() { - // initialize the serial port - Serial.begin(9600); - - // calibrate the keyboard - //Robot.keyboardCalibrate(vals);//For the new robot only. -======= -void setup(){ - Serial.begin(9600); ->>>>>>> f062f704463222e83390b4a954e211f0f7e6e66f -} - -void loop() { - // print out the keyboard readings - Serial.println(Robot.keyboardRead()); - delay(100); -} -- cgit v1.2.3-18-g5258