From 21ca174dbe051346c94c857c39dff08c96fb5939 Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Wed, 3 Jul 2013 22:55:18 +0200
Subject: GSM library to the new format and some strings adaptations

---
 .../Tools/GsmScanNetworks/GsmScanNetworks.ino      | 95 ----------------------
 1 file changed, 95 deletions(-)
 delete mode 100644 libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino

(limited to 'libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino')

diff --git a/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino b/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino
deleted file mode 100644
index 0e442eb..0000000
--- a/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- 
- GSM Scan Networks
- 
- This example prints out the IMEI number of the modem,
- then checks to see if it's connected to a carrier. If so, 
- it prints the phone number associated with the card.
- Then it scans for nearby networks and prints out their signal strengths.
- 
- Circuit:
- * GSM shield 
- * SIM card
- 
- Created 8 Mar 2012
- by Tom Igoe, implemented by Javier Carazo
- Modified 4 Feb 2013
- by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/GSMToolsGsmScanNetworks
- 
- This example code is part of the public domain
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;     // include a 'true' parameter to enable debugging
-GSMScanner scannerNetworks;
-GSMModem modemTest;
-
-// Save data variables
-String IMEI = "";
-
-// serial monitor result messages
-String errortext = "ERROR";
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("GSM networks scanner");
-  scannerNetworks.begin();
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  // get modem parameters
-  // IMEI, modem unique identifier
-  Serial.print("Modem IMEI: ");
-  IMEI = modemTest.getIMEI();
-  IMEI.replace("\n","");
-  if(IMEI != NULL)
-    Serial.println(IMEI);
-}
-
-void loop()
-{
-  // scan for existing networks, displays a list of networks
-  Serial.println("Scanning available networks. May take some seconds.");
-  Serial.println(scannerNetworks.readNetworks());
-  
-    // currently connected carrier
-  Serial.print("Current carrier: ");
-  Serial.println(scannerNetworks.getCurrentCarrier());
-    
-  // returns strength and ber
-  // signal strength in 0-31 scale. 31 means power > 51dBm
-  // BER is the Bit Error Rate. 0-7 scale. 99=not detectable
-  Serial.print("Signal Strength: ");
-  Serial.print(scannerNetworks.getSignalStrength());
-  Serial.println(" [0-31]");
-
-}
-
-- 
cgit v1.2.3-18-g5258