From 21ca174dbe051346c94c857c39dff08c96fb5939 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 3 Jul 2013 22:55:18 +0200 Subject: GSM library to the new format and some strings adaptations --- .../examples/GSMPachubeClient/GSMPachubeClient.ino | 186 --------------------- 1 file changed, 186 deletions(-) delete mode 100644 libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino (limited to 'libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino') diff --git a/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino b/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino deleted file mode 100644 index 2885c9b..0000000 --- a/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino +++ /dev/null @@ -1,186 +0,0 @@ -/* - GSM Pachube client - - This sketch connects an analog sensor to Pachube (http://www.pachube.com) - using a Telefonica GSM/GPRS shield. - - This example has been updated to use version 2.0 of the Pachube.com API. - To make it work, create a feed with a datastream, and give it the ID - sensor1. Or change the code below to match your feed. - - Circuit: - * Analog sensor attached to analog in 0 - * GSM shield attached to an Arduino - * SIM card with a data plan - - created 4 March 2012 - by Tom Igoe - and adapted for GSM shield by David Del Peral - - This code is in the public domain. - - http://arduino.cc/en/Tutorial/GSMExamplesPachubeClient - - */ - -// libraries -#include - -// Pachube Client data -#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here -#define FEEDID 00000 // replace your feed ID -#define USERAGENT "My Project" // user agent is the project name - -// PIN Number -#define PINNUMBER "" - -// APN data -#define GPRS_APN "GPRS_APN" // replace your GPRS APN -#define GPRS_LOGIN "login" // replace with your GPRS login -#define GPRS_PASSWORD "password" // replace with your GPRS password - -// initialize the library instance: -GSMClient client; -GPRS gprs; -GSM gsmAccess; - -// if you don't want to use DNS (and reduce your sketch size) -// use the numeric IP instead of the name for the server: -// IPAddress server(216,52,233,121); // numeric IP for api.pachube.com -char server[] = "api.pachube.com"; // name address for pachube API - -unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds -boolean lastConnected = false; // state of the connection last time through the main loop -const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com - -void setup() -{ - // initialize serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - // connection state - boolean notConnected = true; - - // After starting the modem with GSM.begin() - // attach the shield to the GPRS network with the APN, login and password - while(notConnected) - { - if((gsmAccess.begin(PINNUMBER)==GSM_READY) & - (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) - notConnected = false; - else - { - Serial.println("Not connected"); - delay(1000); - } - } -} - -void loop() -{ - // read the analog sensor: - int sensorReading = analogRead(A0); - - // if there's incoming data from the net connection. - // send it out the serial port. This is for debugging - // purposes only: - if (client.available()) - { - char c = client.read(); - Serial.print(c); - } - - // if there's no net connection, but there was one last time - // through the loop, then stop the client: - if (!client.connected() && lastConnected) - { - client.stop(); - } - - // if you're not connected, and ten seconds have passed since - // your last connection, then connect again and send data: - if(!client.connected() && ((millis() - lastConnectionTime) > postingInterval)) - { - sendData(sensorReading); - } - - // store the state of the connection for next time through - // the loop: - lastConnected = client.connected(); -} - -/* - This method makes a HTTP connection to the server. -*/ -void sendData(int thisData) -{ - // if there's a successful connection: - if (client.connect(server, 80)) - { - Serial.println("connecting..."); - - // send the HTTP PUT request: - client.print("PUT /v2/feeds/"); - client.print(FEEDID); - client.println(".csv HTTP/1.1"); - client.println("Host: api.pachube.com"); - client.print("X-ApiKey: "); - client.println(APIKEY); - client.print("User-Agent: "); - client.println(USERAGENT); - client.print("Content-Length: "); - - // calculate the length of the sensor reading in bytes: - // 8 bytes for "sensor1," + number of digits of the data: - int thisLength = 8 + getLength(thisData); - client.println(thisLength); - - // last pieces of the HTTP PUT request: - client.println("Content-Type: text/csv"); - client.println("Connection: close"); - client.println(); - - // here's the actual content of the PUT request: - client.print("sensor1,"); - client.println(thisData); - } - else - { - // if you couldn't make a connection: - Serial.println("connection failed"); - Serial.println(); - Serial.println("disconnecting."); - client.stop(); - } - // note the time that the connection was made or attempted - lastConnectionTime = millis(); -} - -/* - This method calculates the number of digits in the - sensor reading. Since each digit of the ASCII decimal - representation is a byte, the number of digits equals - the number of bytes. -*/ -int getLength(int someValue) -{ - // there's at least one byte: - int digits = 1; - - // continually divide the value by ten, - // adding one to the digit count for each - // time you divide, until you're at 0: - int dividend = someValue /10; - while (dividend > 0) - { - dividend = dividend /10; - digits++; - } - - // return the number of digits: - return digits; -} - -- cgit v1.2.3-18-g5258