From 7b658714de746b9c3da1e05157413942d349ff1b Mon Sep 17 00:00:00 2001 From: Hans-Christoph Steiner Date: Fri, 12 Sep 2008 16:35:07 +0000 Subject: copying Firmata-0.4beta2 release into trunk, then I'll adjust it to Arduino-0012 --- .../Firmata/examples/SimpleAnalogFirmata/Makefile | 263 +++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 libraries/Firmata/examples/SimpleAnalogFirmata/Makefile (limited to 'libraries/Firmata/examples/SimpleAnalogFirmata/Makefile') diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile b/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + -- cgit v1.2.3-18-g5258