From 386e059e7e6b4703e800b1b9154d52cd9b280d3e Mon Sep 17 00:00:00 2001 From: Cristian Maglie Date: Fri, 8 Jun 2012 22:37:10 +0200 Subject: Added Ethernet for ARM. Updated examples. --- .../Ethernet/examples/CosmClient/CosmClient.ino | 159 +++++++++++++++++++++ .../examples/CosmClientString/CosmClientString.ino | 146 +++++++++++++++++++ .../WebClientRepeating/WebClientRepeating.ino | 110 ++++++++++++++ 3 files changed, 415 insertions(+) create mode 100644 libraries/Ethernet/examples/CosmClient/CosmClient.ino create mode 100644 libraries/Ethernet/examples/CosmClientString/CosmClientString.ino create mode 100644 libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino (limited to 'libraries/Ethernet') diff --git a/libraries/Ethernet/examples/CosmClient/CosmClient.ino b/libraries/Ethernet/examples/CosmClient/CosmClient.ino new file mode 100644 index 0000000..22815af --- /dev/null +++ b/libraries/Ethernet/examples/CosmClient/CosmClient.ino @@ -0,0 +1,159 @@ +/* + Cosm sensor client + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the cosm.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + +http://arduino.cc/en/Tutorial/CosmClient + This code is in the public domain. + + */ + +#include +#include + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to cosm.com + +void setup() { + // start serial port: + Serial.begin(9600); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + diff --git a/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino new file mode 100644 index 0000000..05b549b --- /dev/null +++ b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino @@ -0,0 +1,146 @@ +/* + Cosm sensor client with Strings + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the Cosm.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + + http://arduino.cc/en/Tutorial/CosmClientString + This code is in the public domain. + + */ + +#include +#include + + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// fill in your address here: + byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for Cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com + +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + // convert the data to a String to send it: + + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String if your + // Cosm feed is set up to handle multiple values: + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(String thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.println(thisData); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + diff --git a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino new file mode 100644 index 0000000..e0f06c4 --- /dev/null +++ b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino @@ -0,0 +1,110 @@ +/* + Repeating Web client + + This sketch connects to a a web server and makes a request + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example uses DNS, by assigning the Ethernet client with a MAC address, + IP address, and DNS address. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 19 Apr 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/WebClientRepeating + This code is in the public domain. + + */ + +#include +#include + +// assign a MAC address for the ethernet controller. +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,0,20); + +// fill in your Domain Name Server address here: +IPAddress myDns(1,1,1,1); + +// initialize the library instance: +EthernetClient client; + +char server[] = "www.arduino.cc"; + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 60*1000; // delay between updates, in milliseconds + +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection using a fixed IP address and DNS server: + Ethernet.begin(mac, ip, myDns); + // print the Ethernet board/shield's IP address: + Serial.print("My IP address: "); + Serial.println(Ethernet.localIP()); +} + +void loop() { + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + httpRequest(); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void httpRequest() { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.println("GET /latest.txt HTTP/1.1"); + client.println("Host: www.arduino.cc"); + client.println("User-Agent: arduino-ethernet"); + client.println("Connection: close"); + client.println(); + + // note the time that the connection was made: + lastConnectionTime = millis(); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println("disconnecting."); + client.stop(); + } +} + + + + -- cgit v1.2.3-18-g5258