From 6005c59ad03446153c66a991f01ac91c31d98dac Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Sat, 7 Nov 2009 17:54:56 +0000 Subject: Moving libraries out of arduino platform / core directory and to top-level. --- libraries/Ethernet/utility/socket.c | 558 --------------- libraries/Ethernet/utility/socket.h | 23 - libraries/Ethernet/utility/spi.h | 58 -- libraries/Ethernet/utility/types.h | 165 ----- libraries/Ethernet/utility/w5100.c | 1302 ----------------------------------- libraries/Ethernet/utility/w5100.h | 299 -------- 6 files changed, 2405 deletions(-) delete mode 100755 libraries/Ethernet/utility/socket.c delete mode 100755 libraries/Ethernet/utility/socket.h delete mode 100755 libraries/Ethernet/utility/spi.h delete mode 100755 libraries/Ethernet/utility/types.h delete mode 100755 libraries/Ethernet/utility/w5100.c delete mode 100755 libraries/Ethernet/utility/w5100.h (limited to 'libraries/Ethernet/utility') diff --git a/libraries/Ethernet/utility/socket.c b/libraries/Ethernet/utility/socket.c deleted file mode 100755 index 88c81a8..0000000 --- a/libraries/Ethernet/utility/socket.c +++ /dev/null @@ -1,558 +0,0 @@ -/* -* -@file socket.c -@brief setting chip register for socket - last update : 2008. Jan -* -*/ - -#include "types.h" -#include "w5100.h" -#include "socket.h" - -static uint16 local_port; - - -/** -@brief This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it. -@return 1 for sucess else 0. -*/ -uint8 socket( - SOCKET s, /**< for socket number */ - uint8 protocol, /**< for socket protocol */ - uint16 port, /**< the source port for the socket */ - uint8 flag /**< the option for the socket */ - ) -{ - uint8 ret; -#ifdef __DEF_IINCHIP_DBG__ - printf("socket()\r\n"); -#endif - if ((protocol == Sn_MR_TCP) || (protocol == Sn_MR_UDP) || (protocol == Sn_MR_IPRAW) || (protocol == Sn_MR_MACRAW) || (protocol == Sn_MR_PPPOE)) - { - close(s); - IINCHIP_WRITE(Sn_MR(s),protocol | flag); - if (port != 0) { - IINCHIP_WRITE(Sn_PORT0(s),(uint8)((port & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(port & 0x00ff)); - } else { - local_port++; // if don't set the source port, set local_port number. - IINCHIP_WRITE(Sn_PORT0(s),(uint8)((local_port & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(local_port & 0x00ff)); - } - IINCHIP_WRITE(Sn_CR(s),Sn_CR_OPEN); // run sockinit Sn_CR - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - ret = 1; - } - else - { - ret = 0; - } -#ifdef __DEF_IINCHIP_DBG__ - printf("Sn_SR = %.2x , Protocol = %.2x\r\n", IINCHIP_READ(Sn_SR(s)), IINCHIP_READ(Sn_MR(s))); -#endif - return ret; -} - - -/** -@brief This function close the socket and parameter is "s" which represent the socket number -*/ -void close(SOCKET s) -{ -#ifdef __DEF_IINCHIP_DBG__ - printf("close()\r\n"); -#endif - - IINCHIP_WRITE(Sn_CR(s),Sn_CR_CLOSE); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - - /* +2008.01 [hwkim]: clear interrupt */ - #ifdef __DEF_IINCHIP_INT__ - /* m2008.01 [bj] : all clear */ - putISR(s, 0x00); - #else - /* m2008.01 [bj] : all clear */ - IINCHIP_WRITE(Sn_IR(s), 0xFF); - #endif -} - - -/** -@brief This function established the connection for the channel in passive (server) mode. This function waits for the request from the peer. -@return 1 for success else 0. -*/ -uint8 listen( - SOCKET s /**< the socket number */ - ) -{ - uint8 ret; -#ifdef __DEF_IINCHIP_DBG__ - printf("listen()\r\n"); -#endif - if (IINCHIP_READ(Sn_SR(s)) == SOCK_INIT) - { - IINCHIP_WRITE(Sn_CR(s),Sn_CR_LISTEN); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - ret = 1; - } - else - { - ret = 0; -#ifdef __DEF_IINCHIP_DBG__ - printf("Fail[invalid ip,port]\r\n"); -#endif - } - return ret; -} - - -/** -@brief This function established the connection for the channel in Active (client) mode. - This function waits for the untill the connection is established. - -@return 1 for success else 0. -*/ -uint8 connect(SOCKET s, uint8 * addr, uint16 port) -{ - uint8 ret; -#ifdef __DEF_IINCHIP_DBG__ - printf("connect()\r\n"); -#endif - if - ( - ((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) || - ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || - (port == 0x00) - ) - { - ret = 0; -#ifdef __DEF_IINCHIP_DBG__ - printf("Fail[invalid ip,port]\r\n"); -#endif - } - else - { - ret = 1; - // set destination IP - IINCHIP_WRITE(Sn_DIPR0(s),addr[0]); - IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); - IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); - IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); - IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff)); - IINCHIP_WRITE(Sn_CR(s),Sn_CR_CONNECT); - /* m2008.01 [bj] : wait for completion */ - while ( IINCHIP_READ(Sn_CR(s)) ) ; - - } - - return ret; -} - - - -/** -@brief This function used for disconnect the socket and parameter is "s" which represent the socket number -@return 1 for success else 0. -*/ -void disconnect(SOCKET s) -{ -#ifdef __DEF_IINCHIP_DBG__ - printf("disconnect()\r\n"); -#endif - IINCHIP_WRITE(Sn_CR(s),Sn_CR_DISCON); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ -} - - -/** -@brief This function used to send the data in TCP mode -@return 1 for success else 0. -*/ -uint16 send( - SOCKET s, /**< the socket index */ - const uint8 * buf, /**< a pointer to data */ - uint16 len /**< the data size to be send */ - ) -{ - uint8 status=0; - uint16 ret=0; - uint16 freesize=0; -#ifdef __DEF_IINCHIP_DBG__ - printf("send()\r\n"); -#endif - - if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. - else ret = len; - - // if freebuf is available, start. - do - { - freesize = getSn_TX_FSR(s); - status = IINCHIP_READ(Sn_SR(s)); - if ((status != SOCK_ESTABLISHED) && (status != SOCK_CLOSE_WAIT)) - { - ret = 0; - break; - } -#ifdef __DEF_IINCHIP_DBG__ - printf("socket %d freesize(%d) empty or error\r\n", s, freesize); -#endif - } while (freesize < ret); - - // copy data - send_data_processing(s, (uint8 *)buf, ret); - IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#else - while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#endif - { - /* m2008.01 [bj] : reduce code */ - if ( IINCHIP_READ(Sn_SR(s)) == SOCK_CLOSED ) - { -#ifdef __DEF_IINCHIP_DBG__ - printf("SOCK_CLOSED.\r\n"); -#endif - close(s); - return 0; - } - } -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); -#else - IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); -#endif - return ret; -} - - -/** -@brief This function is an application I/F function which is used to receive the data in TCP mode. - It continues to wait for data as much as the application wants to receive. - -@return received data size for success else -1. -*/ -uint16 recv( - SOCKET s, /**< socket index */ - uint8 * buf, /**< a pointer to copy the data to be received */ - uint16 len /**< the data size to be read */ - ) -{ - uint16 ret=0; -#ifdef __DEF_IINCHIP_DBG__ - printf("recv()\r\n"); -#endif - - - if ( len > 0 ) - { - recv_data_processing(s, buf, len); - IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - ret = len; - } - return ret; -} - - -/** -@brief This function is an application I/F function which is used to send the data for other then TCP mode. - Unlike TCP transmission, The peer's destination address and the port is needed. - -@return This function return send data size for success else -1. -*/ -uint16 sendto( - SOCKET s, /**< socket index */ - const uint8 * buf, /**< a pointer to the data */ - uint16 len, /**< the data size to send */ - uint8 * addr, /**< the peer's Destination IP address */ - uint16 port /**< the peer's destination port number */ - ) -{ -// uint8 status=0; -// uint8 isr=0; - uint16 ret=0; - -#ifdef __DEF_IINCHIP_DBG__ - printf("sendto()\r\n"); -#endif - if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. - else ret = len; - - if - ( - ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || - ((port == 0x00)) ||(ret == 0) - ) - { - /* +2008.01 [bj] : added return value */ - ret = 0; -#ifdef __DEF_IINCHIP_DBG__ - printf("%d Fail[%.2x.%.2x.%.2x.%.2x, %.d, %d]\r\n",s, addr[0], addr[1], addr[2], addr[3] , port, len); - printf("Fail[invalid ip,port]\r\n"); -#endif - } - else - { - IINCHIP_WRITE(Sn_DIPR0(s),addr[0]); - IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); - IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); - IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); - IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff)); - - // copy data - send_data_processing(s, (uint8 *)buf, ret); - IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#else - while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#endif - { -#ifdef __DEF_IINCHIP_INT__ - if (getISR(s) & Sn_IR_TIMEOUT) -#else - if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT) -#endif - { -#ifdef __DEF_IINCHIP_DBG__ - printf("send fail.\r\n"); -#endif -/* +2008.01 [bj]: clear interrupt */ -#ifdef __DEF_IINCHIP_INT__ - putISR(s, getISR(s) & ~(Sn_IR_SEND_OK | Sn_IR_TIMEOUT)); /* clear SEND_OK & TIMEOUT */ -#else - IINCHIP_WRITE(Sn_IR(s), (Sn_IR_SEND_OK | Sn_IR_TIMEOUT)); /* clear SEND_OK & TIMEOUT */ -#endif - return 0; - } - } - -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); -#else - IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); -#endif - - } - return ret; -} - - -/** -@brief This function is an application I/F function which is used to receive the data in other then - TCP mode. This function is used to receive UDP, IP_RAW and MAC_RAW mode, and handle the header as well. - -@return This function return received data size for success else -1. -*/ -uint16 recvfrom( - SOCKET s, /**< the socket number */ - uint8 * buf, /**< a pointer to copy the data to be received */ - uint16 len, /**< the data size to read */ - uint8 * addr, /**< a pointer to store the peer's IP address */ - uint16 *port /**< a pointer to store the peer's port number. */ - ) -{ - uint8 head[8]; - uint16 data_len=0; - uint16 ptr=0; -#ifdef __DEF_IINCHIP_DBG__ - printf("recvfrom()\r\n"); -#endif - - if ( len > 0 ) - { - ptr = IINCHIP_READ(Sn_RX_RD0(s)); - ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_RX_RD0(s) + 1); -#ifdef __DEF_IINCHIP_DBG__ - printf("ISR_RX: rd_ptr : %.4x\r\n", ptr); -#endif - switch (IINCHIP_READ(Sn_MR(s)) & 0x07) - { - case Sn_MR_UDP : - read_data(s, (uint8 *)ptr, head, 0x08); - ptr += 8; - // read peer's IP address, port number. - addr[0] = head[0]; - addr[1] = head[1]; - addr[2] = head[2]; - addr[3] = head[3]; - *port = head[4]; - *port = (*port << 8) + head[5]; - data_len = head[6]; - data_len = (data_len << 8) + head[7]; - -#ifdef __DEF_IINCHIP_DBG__ - printf("UDP msg arrived\r\n"); - printf("source Port : %d\r\n", *port); - printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]); -#endif - - read_data(s, (uint8 *)ptr, buf, data_len); // data copy. - ptr += data_len; - - IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); - break; - - case Sn_MR_IPRAW : - read_data(s, (uint8 *)ptr, head, 0x06); - ptr += 6; - - addr[0] = head[0]; - addr[1] = head[1]; - addr[2] = head[2]; - addr[3] = head[3]; - data_len = head[4]; - data_len = (data_len << 8) + head[5]; - -#ifdef __DEF_IINCHIP_DBG__ - printf("IP RAW msg arrived\r\n"); - printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]); -#endif - read_data(s, (uint8 *)ptr, buf, data_len); // data copy. - ptr += data_len; - - IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); - break; - case Sn_MR_MACRAW : - read_data(s,(uint8*)ptr,head,2); - ptr+=2; - data_len = head[0]; - data_len = (data_len<<8) + head[1] - 2; - - read_data(s,(uint8*) ptr,buf,data_len); - ptr += data_len; - IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); - -#ifdef __DEF_IINCHIP_DGB__ - printf("MAC RAW msg arrived\r\n"); - printf("dest mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[0],buf[1],buf[2],buf[3],buf[4],buf[5]); - printf("src mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[6],buf[7],buf[8],buf[9],buf[10],buf[11]); - printf("type =%.2X%.2X\r\n",buf[12],buf[13]); -#endif - break; - - default : - break; - } - IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; - /* ------- */ - } -#ifdef __DEF_IINCHIP_DBG__ - printf("recvfrom() end ..\r\n"); -#endif - return data_len; -} - - -uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len) -{ - uint8 status=0; -// uint8 isr=0; - uint16 ret=0; - -#ifdef __DEF_IINCHIP_DBG__ - printf("igmpsend()\r\n"); -#endif - if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. - else ret = len; - - if (ret == 0) - { - ; -#ifdef __DEF_IINCHIP_DBG__ - printf("%d Fail[%d]\r\n",len); -#endif - } - else - { - // copy data - send_data_processing(s, (uint8 *)buf, ret); - IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); -/* +2008.01 bj */ - while( IINCHIP_READ(Sn_CR(s)) ) - ; -/* ------- */ - -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#else - while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) -#endif - { - status = IINCHIP_READ(Sn_SR(s)); -#ifdef __DEF_IINCHIP_INT__ - if (getISR(s) & Sn_IR_TIMEOUT) -#else - if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT) -#endif - { -#ifdef __DEF_IINCHIP_DBG__ - printf("igmpsend fail.\r\n"); -#endif - /* in case of igmp, if send fails, then socket closed */ - /* if you want change, remove this code. */ - close(s); - /* ----- */ - - return 0; - } - } - -/* +2008.01 bj */ -#ifdef __DEF_IINCHIP_INT__ - putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); -#else - IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); -#endif - } - return ret; -} - diff --git a/libraries/Ethernet/utility/socket.h b/libraries/Ethernet/utility/socket.h deleted file mode 100755 index a5cce42..0000000 --- a/libraries/Ethernet/utility/socket.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -* -@file socket.h -@brief define function of socket API -* -*/ - -#ifndef _SOCKET_H_ -#define _SOCKET_H_ - -extern uint8 socket(SOCKET s, uint8 protocol, uint16 port, uint8 flag); // Opens a socket(TCP or UDP or IP_RAW mode) -extern void close(SOCKET s); // Close socket -extern uint8 connect(SOCKET s, uint8 * addr, uint16 port); // Establish TCP connection (Active connection) -extern void disconnect(SOCKET s); // disconnect the connection -extern uint8 listen(SOCKET s); // Establish TCP connection (Passive connection) -extern uint16 send(SOCKET s, const uint8 * buf, uint16 len); // Send data (TCP) -extern uint16 recv(SOCKET s, uint8 * buf, uint16 len); // Receive data (TCP) -extern uint16 sendto(SOCKET s, const uint8 * buf, uint16 len, uint8 * addr, uint16 port); // Send data (UDP/IP RAW) -extern uint16 recvfrom(SOCKET s, uint8 * buf, uint16 len, uint8 * addr, uint16 *port); // Receive data (UDP/IP RAW) - -extern uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len); -#endif -/* _SOCKET_H_ */ diff --git a/libraries/Ethernet/utility/spi.h b/libraries/Ethernet/utility/spi.h deleted file mode 100755 index 000705d..0000000 --- a/libraries/Ethernet/utility/spi.h +++ /dev/null @@ -1,58 +0,0 @@ -//----------------------------------------------------------------------------- -//AVR Mega168 SPI HAL -#define BIT0 0x01 -#define BIT1 0x02 -#define BIT2 0x04 -#define BIT3 0x08 -#define BIT4 0x10 -#define BIT5 0x20 -#define BIT6 0x40 -#define BIT7 0x80 - -#define SPI0_SS_BIT BIT2 -#define SPI0_SS_DDR DDRB -#define SPI0_SS_PORT PORTB - -#define SPI0_SCLK_BIT BIT5 -#define SPI0_SCLK_DDR DDRB -#define SPI0_SCLK_PORT PORTB - -#define SPI0_MOSI_BIT BIT3 -#define SPI0_MOSI_DDR DDRB -#define SPI0_MOSI_PORT PORTB - -#define SPI0_MISO_BIT BIT4 -#define SPI0_MISO_DDR DDRB -#define SPI0_MISO_PORT PORTB - - -#define SPI0_WaitForReceive() -#define SPI0_RxData() (SPDR) - -#define SPI0_TxData(Data) (SPDR = Data) -#define SPI0_WaitForSend() while( (SPSR & 0x80)==0x00 ) - -#define SPI0_SendByte(Data) SPI0_TxData(Data);SPI0_WaitForSend() -#define SPI0_RecvBute() SPI0_RxData() - -// PB4(MISO), PB3(MOSI), PB5(SCK), PB2(/SS) // CS=1, waiting for SPI start // SPI mode 0, 4MHz -#define SPI0_Init() DDRB |= SPI0_SS_BIT|SPI0_SCLK_BIT|SPI0_MOSI_BIT;\ - PORTB |= SPI0_SS_BIT; PORTB &= ~(SPI0_SCLK_BIT|SPI0_MOSI_BIT);\ - SPCR = 0x50 -//----------------------------------------------------------------------------- - -//----------------------------------------------------------------------------- -//IInChip SPI HAL -#define IINCHIP_SpiInit SPI0_Init -#define IINCHIP_SpiSendData SPI0_SendByte -#define IINCHIP_SpiRecvData SPI0_RxData - - -#define IINCHIP_CS_BIT BIT2 -#define IINCHIP_CS_DDR DDRB -#define IINCHIP_CS_PORT PORTB - -#define IINCHIP_CSInit() (IINCHIP_CS_DDR |= IINCHIP_CS_BIT) -#define IINCHIP_CSon() (IINCHIP_CS_PORT |= IINCHIP_CS_BIT) -#define IINCHIP_CSoff() (IINCHIP_CS_PORT &= ~IINCHIP_CS_BIT) -//----------------------------------------------------------------------------- diff --git a/libraries/Ethernet/utility/types.h b/libraries/Ethernet/utility/types.h deleted file mode 100755 index 6c350da..0000000 --- a/libraries/Ethernet/utility/types.h +++ /dev/null @@ -1,165 +0,0 @@ -/* -* -@file type.h -* -*/ - -#ifndef _TYPE_H_ -#define _TYPE_H_ - - -/*************************************************** - * attribute for mcu ( types, ... ) - ***************************************************/ -//#include "mcu_define.h" -#define __MCU_AVR__ 1 -#define __MCU_TYPE__ __MCU_AVR__ - -//---- Refer "Rom File Maker Manual Vx.x.pdf" -#include - -#define _ENDIAN_LITTLE_ 0 /**< This must be defined if system is little-endian alignment */ -#define _ENDIAN_BIG_ 1 -#define SYSTEM_ENDIAN _ENDIAN_LITTLE_ - -#define MAX_SOCK_NUM 4 /**< Maxmium number of socket */ -#define CLK_CPU F_CPU /**< 8Mhz(for serial) */ - -/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/ -//#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */ -//#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */ -//#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */ - /* If it is defined, the source files(md5.h,md5.c) must be included in your project. - Otherwize, the source files must be removed in your project. */ - -#define __DEF_IINCHIP_DIRECT_MODE__ 1 -#define __DEF_IINCHIP_INDIRECT_MODE__ 2 -#define __DEF_IINCHIP_SPI_MODE__ 3 - -//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__ -//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__ -#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/ - - -/** -@brief __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip -*/ -#define __DEF_IINCHIP_MAP_BASE__ 0x8000 -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) - #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__ -#else - #define COMMON_BASE 0x0000 -#endif -#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */ -#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */ - - -#if (__MCU_TYPE__ == __MCU_AVR__) - #ifdef __DEF_IINCHIP_INT__ - // iinchip use external interrupt 4 - #define IINCHIP_ISR_DISABLE() (EIMSK &= ~(0x10)) - #define IINCHIP_ISR_ENABLE() (EIMSK |= 0x10) - #define IINCHIP_ISR_GET(X) (X = EIMSK) - #define IINCHIP_ISR_SET(X) (EIMSK = X) - #else - #define IINCHIP_ISR_DISABLE() - #define IINCHIP_ISR_ENABLE() - #define IINCHIP_ISR_GET(X) - #define IINCHIP_ISR_SET(X) - #endif -#else -#error "unknown MCU type" -#endif - -#ifndef NULL -#define NULL ((void *) 0) -#endif - -//typedef enum { false, true } bool; - -#ifndef _SIZE_T -#define _SIZE_T -typedef unsigned int size_t; -#endif - -/** - * The 8-bit signed data type. - */ -typedef char int8; -/** - * The volatile 8-bit signed data type. - */ -typedef volatile char vint8; -/** - * The 8-bit unsigned data type. - */ -typedef unsigned char uint8; -/** - * The volatile 8-bit unsigned data type. - */ -typedef volatile unsigned char vuint8; - -/** - * The 16-bit signed data type. - */ -typedef int int16; -/** - * The volatile 16-bit signed data type. - */ -typedef volatile int vint16; -/** - * The 16-bit unsigned data type. - */ -typedef unsigned int uint16; -/** - * The volatile 16-bit unsigned data type. - */ -typedef volatile unsigned int vuint16; -/** - * The 32-bit signed data type. - */ -typedef long int32; -/** - * The volatile 32-bit signed data type. - */ -typedef volatile long vint32; -/** - * The 32-bit unsigned data type. - */ -typedef unsigned long uint32; -/** - * The volatile 32-bit unsigned data type. - */ -typedef volatile unsigned long vuint32; - -/* bsd */ -typedef uint8 u_char; /**< 8-bit value */ -typedef uint8 SOCKET; -typedef uint16 u_short; /**< 16-bit value */ -typedef uint16 u_int; /**< 16-bit value */ -typedef uint32 u_long; /**< 32-bit value */ - -typedef union _un_l2cval { - u_long lVal; - u_char cVal[4]; -}un_l2cval; - -typedef union _un_i2cval { - u_int iVal; - u_char cVal[2]; -}un_i2cval; - - -/** global define */ -#define FW_VERSION 0x01010000 /* System F/W Version : 1.1.0.0 */ -#define HW_VERSION 0x01000000 - - -#define TX_RX_MAX_BUF_SIZE 2048 -#define TX_BUF 0x1100 -#define RX_BUF (TX_BUF+TX_RX_MAX_BUF_SIZE) - -#define UART_DEVICE_CNT 1 /**< UART device number */ -/* #define SUPPORT_UART_ONE */ - -#endif /* _TYPE_H_ */ diff --git a/libraries/Ethernet/utility/w5100.c b/libraries/Ethernet/utility/w5100.c deleted file mode 100755 index 7d0f55a..0000000 --- a/libraries/Ethernet/utility/w5100.c +++ /dev/null @@ -1,1302 +0,0 @@ -/* - * (c)COPYRIGHT - * ALL RIGHT RESERVED - * - * FileName : w5100.c - * Revision History : - * ---------- ------- ------------------------------------------------ - * Date version Description - * ---------- ------- ------------------------------------------------ - * 01/25/2007 1.1 Bug is Fixed in the Indirect Mode - * : Memory mapping error - * ---------- ------- ------------------------------------------------ - * 01/08/2008 1.2 Modification of Socket Command Part - * : Check if the appropriately performed after writing Sn_CR - * - * Modification of SPI Part - * : SPI code changed by adding 'spi.h'. - * : Change control type for SPI port from byte to bit. - * ---------- ------- ------------------------------------------------ - * 01/15/2008 1.3 Bug is Fixed in the pppinit() fuction. - * : do not clear interrupt value, so fixed. - * - * Modification of ISR - * : Do not exit ISR, if there is interrupt. - * ---------- ------- ------------------------------------------------ - * 03/21/2008 1.4 Modification of SetMR() function - * : Use IINCHIP_WRITE() function in Direct or SPI mode. - * ---------- ------- ------------------------------------------------ - */ -#include -#include - -#include -// #include - -#include "types.h" -#include "socket.h" -#include "w5100.h" - - - -#ifdef __DEF_IINCHIP_PPP__ - #include "md5.h" -#endif - - -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) -#include "spi.h" //+2007113[jhpark] -#endif - -static uint8 I_STATUS[MAX_SOCK_NUM]; -static uint16 SMASK[MAX_SOCK_NUM]; /**< Variable for Tx buffer MASK in each channel */ -static uint16 RMASK[MAX_SOCK_NUM]; /**< Variable for Rx buffer MASK in each channel */ -static uint16 SSIZE[MAX_SOCK_NUM]; /**< Max Tx buffer size by each channel */ -static uint16 RSIZE[MAX_SOCK_NUM]; /**< Max Rx buffer size by each channel */ -static uint16 SBUFBASEADDRESS[MAX_SOCK_NUM]; /**< Tx buffer base address by each channel */ -static uint16 RBUFBASEADDRESS[MAX_SOCK_NUM]; /**< Rx buffer base address by each channel */ - -uint8 getISR(uint8 s) -{ - return I_STATUS[s]; -} - -void putISR(uint8 s, uint8 val) -{ - I_STATUS[s] = val; -} - -uint16 getIINCHIP_RxMAX(uint8 s) -{ - return RSIZE[s]; -} -uint16 getIINCHIP_TxMAX(uint8 s) -{ - return SSIZE[s]; -} -uint16 getIINCHIP_RxMASK(uint8 s) -{ - return RMASK[s]; -} -uint16 getIINCHIP_TxMASK(uint8 s) -{ - return SMASK[s]; -} -uint16 getIINCHIP_RxBASE(uint8 s) -{ - return RBUFBASEADDRESS[s]; -} -uint16 getIINCHIP_TxBASE(uint8 s) -{ - return SBUFBASEADDRESS[s]; -} - - /** -@brief This function writes the data into W5100 registers. -*/ -uint8 IINCHIP_WRITE(uint16 addr,uint8 data) -{ -// DIRECT MODE I/F -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) - IINCHIP_ISR_DISABLE(); - *((vuint8*)(addr)) = data; - IINCHIP_ISR_ENABLE(); -#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) /* INDIRECT MODE I/F */ - IINCHIP_ISR_DISABLE(); - *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); - *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); - *((vuint8*)IDM_DR) = data; - IINCHIP_ISR_ENABLE(); -#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) - IINCHIP_ISR_DISABLE(); - IINCHIP_SpiInit(); - - //SPI MODE I/F - IINCHIP_CSoff(); // CS=0, SPI start - - IINCHIP_SpiSendData(0xF0); - IINCHIP_SpiSendData((addr & 0xFF00) >> 8); - IINCHIP_SpiSendData(addr & 0x00FF); - IINCHIP_SpiSendData(data); - - IINCHIP_CSon(); - - IINCHIP_ISR_ENABLE(); -#else - #error "unknown bus type" -#endif - return 1; -} - - -/** -@brief This function reads the value from W5100 registers. -*/ -uint8 IINCHIP_READ(uint16 addr) -{ - uint8 data; - -// DIRECT MODE I/F - -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) - IINCHIP_ISR_DISABLE(); - data = *((vuint8*)(addr)); - IINCHIP_ISR_ENABLE(); -#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) - IINCHIP_ISR_DISABLE(); - *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); - *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); - data = *((vuint8*)IDM_DR); - IINCHIP_ISR_ENABLE(); - -#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) - IINCHIP_ISR_DISABLE(); - IINCHIP_SpiInit(); - IINCHIP_CSoff(); // CS=0, SPI start - - IINCHIP_SpiSendData(0x0F); - IINCHIP_SpiSendData((addr & 0xFF00) >> 8); - IINCHIP_SpiSendData(addr & 0x00FF); - - - IINCHIP_SpiSendData(0); - data = IINCHIP_SpiRecvData(); - - IINCHIP_CSon(); // SPI end - IINCHIP_ISR_ENABLE(); -#else - #error "unknown bus type" -#endif - return data; -} - - -/** -@brief This function writes into W5100 memory(Buffer) -*/ -uint16 wiz_write_buf(uint16 addr,uint8* buf,uint16 len) -{ -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) - IINCHIP_ISR_DISABLE(); - memcpy((uint8 *)addr, buf, len); - IINCHIP_ISR_ENABLE(); -#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) - uint16 idx = 0; - IINCHIP_ISR_DISABLE(); - *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); - *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); - for (idx = 0; idx < len ; idx++) *((vuint8*)IDM_DR) = buf[idx]; - IINCHIP_ISR_ENABLE(); -#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) - uint16 idx = 0; - - IINCHIP_ISR_DISABLE(); - IINCHIP_SpiInit(); - - //SPI MODE I/F - for(idx=0;idx> 8); - IINCHIP_SpiSendData((addr+idx) & 0x00FF); - IINCHIP_SpiSendData(buf[idx]); - - IINCHIP_CSon(); // CS=0, SPI end - } - - IINCHIP_ISR_ENABLE(); -#else - #error "unknown bus type" -#endif - return len; -} - - -/** -@brief This function reads into W5100 memory(Buffer) -*/ -uint16 wiz_read_buf(uint16 addr, uint8* buf,uint16 len) -{ -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) - IINCHIP_ISR_DISABLE(); - memcpy(buf, (uint8 *)addr, len); - IINCHIP_ISR_ENABLE(); -#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) - uint16 idx = 0; - IINCHIP_ISR_DISABLE(); - *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); - *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); - for (idx = 0; idx < len ; idx++) buf[idx] = *((vuint8*)IDM_DR); - IINCHIP_ISR_ENABLE(); -#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) - uint16 idx = 0; - IINCHIP_ISR_DISABLE(); - - IINCHIP_SpiInit(); - - for (idx=0; idx> 8); - IINCHIP_SpiSendData((addr+idx) & 0x00FF); - - - IINCHIP_SpiSendData(0); - buf[idx] = IINCHIP_SpiRecvData(); - - IINCHIP_CSon(); // CS=0, SPI end - } - - IINCHIP_ISR_ENABLE(); -#else - #error "unknown bus type" -#endif - return len; -} - - -/** -@brief Socket interrupt routine -*/ -#ifdef __DEF_IINCHIP_INT__ -ISR(INT4_vect) -{ - uint8 int_val; - IINCHIP_ISR_DISABLE(); - int_val = IINCHIP_READ(IR); - - /* +200801[bj] process all of interupt */ - do { - /*---*/ - - if (int_val & IR_CONFLICT) - { - printf("IP conflict : %.2x\r\n", int_val); - } - if (int_val & IR_UNREACH) - { - printf("INT Port Unreachable : %.2x\r\n", int_val); - printf("UIPR0 : %d.%d.%d.%d\r\n", IINCHIP_READ(UIPR0), IINCHIP_READ(UIPR0+1), IINCHIP_READ(UIPR0+2), IINCHIP_READ(UIPR0+3)); - printf("UPORT0 : %.2x %.2x\r\n", IINCHIP_READ(UPORT0), IINCHIP_READ(UPORT0+1)); - } - - /* +200801[bj] interrupt clear */ - IINCHIP_WRITE(IR, 0xf0); - /*---*/ - - if (int_val & IR_SOCK(0)) - { - /* +-200801[bj] save interrupt value*/ - I_STATUS[0] |= IINCHIP_READ(Sn_IR(0)); // can be come to over two times. - IINCHIP_WRITE(Sn_IR(0), I_STATUS[0]); - /*---*/ - } - if (int_val & IR_SOCK(1)) - { - /* +-200801[bj] save interrupt value*/ - I_STATUS[1] |= IINCHIP_READ(Sn_IR(1)); - IINCHIP_WRITE(Sn_IR(1), I_STATUS[1]); - /*---*/ - } - if (int_val & IR_SOCK(2)) - { - /* +-200801[bj] save interrupt value*/ - I_STATUS[2] |= IINCHIP_READ(Sn_IR(2)); - IINCHIP_WRITE(Sn_IR(2), I_STATUS[2]); - /*---*/ - } - if (int_val & IR_SOCK(3)) - { - /* +-200801[bj] save interrupt value*/ - I_STATUS[3] |= IINCHIP_READ(Sn_IR(3)); - IINCHIP_WRITE(Sn_IR(3), I_STATUS[3]); - /*---*/ - } - - /* +-200801[bj] re-read interrupt value*/ - int_val = IINCHIP_READ(IR); - - /* +200801[bj] if exist, contiue to process */ - } while (int_val != 0x00); - /*---*/ - - IINCHIP_ISR_ENABLE(); -} -#endif - -/** -@brief This function is for resetting of the iinchip. Initializes the iinchip to work in whether DIRECT or INDIRECT mode -*/ -void iinchip_init(void) -{ - setMR( MR_RST ); -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) - setMR( MR_IND | MR_AI ); -#ifdef __DEF_IINCHIP_DBG__ - printf("MR value is %d \r\n",IINCHIP_READ(MR)); -#endif -#endif -} - - -/** -@brief This function set the transmit & receive buffer size as per the channels is used - -Note for TMSR and RMSR bits are as follows\n -bit 1-0 : memory size of channel #0 \n -bit 3-2 : memory size of channel #1 \n -bit 5-4 : memory size of channel #2 \n -bit 7-6 : memory size of channel #3 \n\n -Maximum memory size for Tx, Rx in the W5100 is 8K Bytes,\n -In the range of 8KBytes, the memory size could be allocated dynamically by each channel.\n -Be attentive to sum of memory size shouldn't exceed 8Kbytes\n -and to data transmission and receiption from non-allocated channel may cause some problems.\n -If the 8KBytes memory is already assigned to centain channel, \n -other 3 channels couldn't be used, for there's no available memory.\n -If two 4KBytes memory are assigned to two each channels, \n -other 2 channels couldn't be used, for there's no available memory.\n -*/ -void sysinit( - uint8 tx_size, /**< tx_size Tx memory size (00 - 1KByte, 01- 2KBtye, 10 - 4KByte, 11 - 8KByte) */ - uint8 rx_size /**< rx_size Rx memory size (00 - 1KByte, 01- 2KBtye, 10 - 4KByte, 11 - 8KByte) */ - ) -{ - int16 i; - int16 ssum,rsum; - -#ifdef __DEF_IINCHIP_DBG__ - printf("sysinit()\r\n"); -#endif - - ssum = 0; - rsum = 0; - - IINCHIP_WRITE(TMSR,tx_size); /* Set Tx memory size for each channel */ - IINCHIP_WRITE(RMSR,rx_size); /* Set Rx memory size for each channel */ - - SBUFBASEADDRESS[0] = (uint16)(__DEF_IINCHIP_MAP_TXBUF__); /* Set base address of Tx memory for channel #0 */ - RBUFBASEADDRESS[0] = (uint16)(__DEF_IINCHIP_MAP_RXBUF__); /* Set base address of Rx memory for channel #0 */ - -#ifdef __DEF_IINCHIP_DBG__ - printf("Channel : SEND MEM SIZE : RECV MEM SIZE\r\n"); -#endif - - for (i = 0 ; i < MAX_SOCK_NUM; i++) // Set the size, masking and base address of Tx & Rx memory by each channel - { - SSIZE[i] = (int16)(0); - RSIZE[i] = (int16)(0); - if (ssum < 8192) - { - switch((tx_size >> i*2) & 0x03) // Set Tx memory size - { - case 0: - SSIZE[i] = (int16)(1024); - SMASK[i] = (uint16)(0x03FF); - break; - case 1: - SSIZE[i] = (int16)(2048); - SMASK[i] = (uint16)(0x07FF); - break; - case 2: - SSIZE[i] = (int16)(4096); - SMASK[i] = (uint16)(0x0FFF); - break; - case 3: - SSIZE[i] = (int16)(8192); - SMASK[i] = (uint16)(0x1FFF); - break; - } - } - if (rsum < 8192) - { - switch((rx_size >> i*2) & 0x03) // Set Rx memory size - { - case 0: - RSIZE[i] = (int16)(1024); - RMASK[i] = (uint16)(0x03FF); - break; - case 1: - RSIZE[i] = (int16)(2048); - RMASK[i] = (uint16)(0x07FF); - break; - case 2: - RSIZE[i] = (int16)(4096); - RMASK[i] = (uint16)(0x0FFF); - break; - case 3: - RSIZE[i] = (int16)(8192); - RMASK[i] = (uint16)(0x1FFF); - break; - } - } - ssum += SSIZE[i]; - rsum += RSIZE[i]; - - if (i != 0) // Sets base address of Tx and Rx memory for channel #1,#2,#3 - { - SBUFBASEADDRESS[i] = SBUFBASEADDRESS[i-1] + SSIZE[i-1]; - RBUFBASEADDRESS[i] = RBUFBASEADDRESS[i-1] + RSIZE[i-1]; - } -#ifdef __DEF_IINCHIP_DBG__ - printf("%d : %.4x : %.4x : %.4x : %.4x\r\n", i, (uint16)SBUFBASEADDRESS[i], (uint16)RBUFBASEADDRESS[i], SSIZE[i], RSIZE[i]); -#endif - } -} - - -void setMR(uint8 val) -{ - -#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) - *((volatile uint8*)(MR)) = val; -#else - /* DIRECT ACCESS */ - IINCHIP_WRITE(MR,val); -#endif -} - - -/** -@brief This function sets up gateway IP address. -*/ -void setGAR( - uint8 * addr /**< a pointer to a 4 -byte array responsible to set the Gateway IP address. */ - ) -{ - IINCHIP_WRITE((GAR0 + 0),addr[0]); - IINCHIP_WRITE((GAR0 + 1),addr[1]); - IINCHIP_WRITE((GAR0 + 2),addr[2]); - IINCHIP_WRITE((GAR0 + 3),addr[3]); -} -void getGWIP(uint8 * addr) -{ - addr[0] = IINCHIP_READ((GAR0 + 0)); - addr[1] = IINCHIP_READ((GAR0 + 1)); - addr[2] = IINCHIP_READ((GAR0 + 2)); - addr[3] = IINCHIP_READ((GAR0 + 3)); -} - - -/** -@brief It sets up SubnetMask address -*/ -void setSUBR( - uint8 * addr /**< a pointer to a 4 -byte array responsible to set the SubnetMask address */ - ) -{ - IINCHIP_WRITE((SUBR0 + 0),addr[0]); - IINCHIP_WRITE((SUBR0 + 1),addr[1]); - IINCHIP_WRITE((SUBR0 + 2),addr[2]); - IINCHIP_WRITE((SUBR0 + 3),addr[3]); -} - - -/** -@brief This function sets up MAC address. -*/ -void setSHAR( - uint8 * addr /**< a pointer to a 6 -byte array responsible to set the MAC address. */ - ) -{ - IINCHIP_WRITE((SHAR0 + 0),addr[0]); - IINCHIP_WRITE((SHAR0 + 1),addr[1]); - IINCHIP_WRITE((SHAR0 + 2),addr[2]); - IINCHIP_WRITE((SHAR0 + 3),addr[3]); - IINCHIP_WRITE((SHAR0 + 4),addr[4]); - IINCHIP_WRITE((SHAR0 + 5),addr[5]); -} - - -/** -@brief This function sets up Source IP address. -*/ -void setSIPR( - uint8 * addr /**< a pointer to a 4 -byte array responsible to set the Source IP address. */ - ) -{ - IINCHIP_WRITE((SIPR0 + 0),addr[0]); - IINCHIP_WRITE((SIPR0 + 1),addr[1]); - IINCHIP_WRITE((SIPR0 + 2),addr[2]); - IINCHIP_WRITE((SIPR0 + 3),addr[3]); -} - - -/** -@brief This function gets Interrupt register in common register. - */ -uint8 getIR( void ) -{ - return IINCHIP_READ(IR); -} - - - -/** -@brief This function sets up Retransmission time. - -If there is no response from the peer or delay in response then retransmission -will be there as per RTR (Retry Time-value Register)setting -*/ -void setRTR(uint16 timeout) -{ - IINCHIP_WRITE(RTR0,(uint8)((timeout & 0xff00) >> 8)); - IINCHIP_WRITE((RTR0 + 1),(uint8)(timeout & 0x00ff)); -} - - -/** -@brief This function set the number of Retransmission. - -If there is no response from the peer or delay in response then recorded time -as per RTR & RCR register seeting then time out will occur. -*/ -void setRCR(uint8 retry) -{ - IINCHIP_WRITE(RCR,retry); -} - - -/** -@brief This function set the interrupt mask Enable/Disable appropriate Interrupt. ('1' : interrupt enable) - -If any bit in IMR is set as '0' then there is not interrupt signal though the bit is -set in IR register. -*/ -void setIMR(uint8 mask) -{ - IINCHIP_WRITE(IMR,mask); // must be setted 0x10. -} - - -/** -@brief These below functions are used to get the Gateway, SubnetMask - and Source Hardware Address (MAC Address) and Source IP address -*/ -void getGAR(uint8 * addr) -{ - addr[0] = IINCHIP_READ(GAR0); - addr[1] = IINCHIP_READ(GAR0+1); - addr[2] = IINCHIP_READ(GAR0+2); - addr[3] = IINCHIP_READ(GAR0+3); -} -void getSUBR(uint8 * addr) -{ - addr[0] = IINCHIP_READ(SUBR0); - addr[1] = IINCHIP_READ(SUBR0+1); - addr[2] = IINCHIP_READ(SUBR0+2); - addr[3] = IINCHIP_READ(SUBR0+3); -} -void getSHAR(uint8 * addr) -{ - addr[0] = IINCHIP_READ(SHAR0); - addr[1] = IINCHIP_READ(SHAR0+1); - addr[2] = IINCHIP_READ(SHAR0+2); - addr[3] = IINCHIP_READ(SHAR0+3); - addr[4] = IINCHIP_READ(SHAR0+4); - addr[5] = IINCHIP_READ(SHAR0+5); -} -void getSIPR(uint8 * addr) -{ - addr[0] = IINCHIP_READ(SIPR0); - addr[1] = IINCHIP_READ(SIPR0+1); - addr[2] = IINCHIP_READ(SIPR0+2); - addr[3] = IINCHIP_READ(SIPR0+3); -} - - -/** -@brief These below functions are used to get the Destination Hardware Address (MAC Address), Destination IP address and Destination Port. -*/ -void getSn_DHAR(SOCKET s, uint8 * addr) -{ - addr[0] = IINCHIP_READ(Sn_DHAR0(s)); - addr[1] = IINCHIP_READ(Sn_DHAR0(s)+1); - addr[2] = IINCHIP_READ(Sn_DHAR0(s)+2); - addr[3] = IINCHIP_READ(Sn_DHAR0(s)+3); - addr[4] = IINCHIP_READ(Sn_DHAR0(s)+4); - addr[5] = IINCHIP_READ(Sn_DHAR0(s)+5); -} -void setSn_DHAR(SOCKET s, uint8 * addr) -{ - IINCHIP_WRITE((Sn_DHAR0(s) + 0),addr[0]); - IINCHIP_WRITE((Sn_DHAR0(s) + 1),addr[1]); - IINCHIP_WRITE((Sn_DHAR0(s) + 2),addr[2]); - IINCHIP_WRITE((Sn_DHAR0(s) + 3),addr[3]); - IINCHIP_WRITE((Sn_DHAR0(s) + 4),addr[4]); - IINCHIP_WRITE((Sn_DHAR0(s) + 5),addr[5]); -} -void getSn_DIPR(SOCKET s, uint8 * addr) -{ - addr[0] = IINCHIP_READ(Sn_DIPR0(s)); - addr[1] = IINCHIP_READ(Sn_DIPR0(s)+1); - addr[2] = IINCHIP_READ(Sn_DIPR0(s)+2); - addr[3] = IINCHIP_READ(Sn_DIPR0(s)+3); -} -void setSn_DIPR(SOCKET s, uint8 * addr) -{ - IINCHIP_WRITE((Sn_DIPR0(s) + 0),addr[0]); - IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); - IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); - IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); -} -void getSn_DPORT(SOCKET s, uint8 * addr) -{ - addr[0] = IINCHIP_READ(Sn_DPORT0(s)); - addr[1] = IINCHIP_READ(Sn_DPORT0(s)+1); -} -void setSn_DPORT(SOCKET s, uint8 * addr) -{ - IINCHIP_WRITE((Sn_DPORT0(s) + 0),addr[0]); - IINCHIP_WRITE((Sn_DPORT0(s) + 1),addr[1]); -} - - -/** -@brief This sets the maximum segment size of TCP in Active Mode), while in Passive Mode this is set by peer -*/ -void setSn_MSS(SOCKET s, uint16 Sn_MSSR0) -{ - IINCHIP_WRITE(Sn_MSSR0(s),(uint8)((Sn_MSSR0 & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_MSSR0(s) + 1),(uint8)(Sn_MSSR0 & 0x00ff)); -} - -void setSn_TTL(SOCKET s, uint8 ttl) -{ - IINCHIP_WRITE(Sn_TTL(s), ttl); -} - - -/** -@brief These below function is used to setup the Protocol Field of IP Header when - executing the IP Layer RAW mode. -*/ -void setSn_PROTO(SOCKET s, uint8 proto) -{ - IINCHIP_WRITE(Sn_PROTO(s),proto); -} - - -/** -@brief get socket interrupt status - -These below functions are used to read the Interrupt & Soket Status register -*/ -uint8 getSn_IR(SOCKET s) -{ - return IINCHIP_READ(Sn_IR(s)); -} - - -/** -@brief get socket status -*/ -uint8 getSn_SR(SOCKET s) -{ - return IINCHIP_READ(Sn_SR(s)); -} - - -/** -@brief get socket TX free buf size - -This gives free buffer size of transmit buffer. This is the data size that user can transmit. -User shuold check this value first and control the size of transmitting data -*/ -uint16 getSn_TX_FSR(SOCKET s) -{ - uint16 val=0,val1=0; - do - { - val1 = IINCHIP_READ(Sn_TX_FSR0(s)); - val1 = (val1 << 8) + IINCHIP_READ(Sn_TX_FSR0(s) + 1); - if (val1 != 0) - { - val = IINCHIP_READ(Sn_TX_FSR0(s)); - val = (val << 8) + IINCHIP_READ(Sn_TX_FSR0(s) + 1); - } - } while (val != val1); - return val; -} - - -/** -@brief get socket RX recv buf size - -This gives size of received data in receive buffer. -*/ -uint16 getSn_RX_RSR(SOCKET s) -{ - uint16 val=0,val1=0; - do - { - val1 = IINCHIP_READ(Sn_RX_RSR0(s)); - val1 = (val1 << 8) + IINCHIP_READ(Sn_RX_RSR0(s) + 1); - if(val1 != 0) - { - val = IINCHIP_READ(Sn_RX_RSR0(s)); - val = (val << 8) + IINCHIP_READ(Sn_RX_RSR0(s) + 1); - } - } while (val != val1); - return val; -} - - -/** -@brief This function is being called by send() and sendto() function also. - -This function read the Tx write pointer register and after copy the data in buffer update the Tx write pointer -register. User should read upper byte first and lower byte later to get proper value. -*/ -void send_data_processing(SOCKET s, uint8 *data, uint16 len) -{ - uint16 ptr; - ptr = IINCHIP_READ(Sn_TX_WR0(s)); - ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_TX_WR0(s) + 1); - write_data(s, data, (uint8 *)(ptr), len); - ptr += len; - IINCHIP_WRITE(Sn_TX_WR0(s),(uint8)((ptr & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_TX_WR0(s) + 1),(uint8)(ptr & 0x00ff)); -} - - -/** -@brief This function is being called by recv() also. - -This function read the Rx read pointer register -and after copy the data from receive buffer update the Rx write pointer register. -User should read upper byte first and lower byte later to get proper value. -*/ -void recv_data_processing(SOCKET s, uint8 *data, uint16 len) -{ - uint16 ptr; - ptr = IINCHIP_READ(Sn_RX_RD0(s)); - ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_RX_RD0(s) + 1); -#ifdef __DEF_IINCHIP_DBG__ - printf("ISR_RX: rd_ptr : %.4x\r\n", ptr); -#endif - read_data(s, (uint8 *)ptr, data, len); // read data - ptr += len; - IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); - IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); -} - - -/** -@brief for copy the data form application buffer to Transmite buffer of the chip. - -This function is being used for copy the data form application buffer to Transmite -buffer of the chip. It calculate the actual physical address where one has to write -the data in transmite buffer. Here also take care of the condition while it exceed -the Tx memory uper-bound of socket. -*/ -void write_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len) -{ - uint16 size; - uint16 dst_mask; - uint8 * dst_ptr; - - dst_mask = (uint16)dst & getIINCHIP_TxMASK(s); - dst_ptr = (uint8 *)(getIINCHIP_TxBASE(s) + dst_mask); - - if (dst_mask + len > getIINCHIP_TxMAX(s)) - { - size = getIINCHIP_TxMAX(s) - dst_mask; - wiz_write_buf((uint16)dst_ptr, (uint8*)src, size); - src += size; - size = len - size; - dst_ptr = (uint8 *)(getIINCHIP_TxBASE(s)); - wiz_write_buf((uint16)dst_ptr, (uint8*)src, size); - } - else - { - wiz_write_buf((uint16)dst_ptr, (uint8*)src, len); - } -} - - -/** -@brief This function is being used for copy the data form Receive buffer of the chip to application buffer. - -It calculate the actual physical address where one has to read -the data from Receive buffer. Here also take care of the condition while it exceed -the Rx memory uper-bound of socket. -*/ -void read_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len) -{ - uint16 size; - uint16 src_mask; - uint8 * src_ptr; - - src_mask = (uint16)src & getIINCHIP_RxMASK(s); - src_ptr = (uint8 *)(getIINCHIP_RxBASE(s) + src_mask); - - if( (src_mask + len) > getIINCHIP_RxMAX(s) ) - { - size = getIINCHIP_RxMAX(s) - src_mask; - wiz_read_buf((uint16)src_ptr, (uint8*)dst,size); - dst += size; - size = len - size; - src_ptr = (uint8 *)(getIINCHIP_RxBASE(s)); - wiz_read_buf((uint16)src_ptr, (uint8*) dst,size); - } - else - { - wiz_read_buf((uint16)src_ptr, (uint8*) dst,len); - } -} - - -#ifdef __DEF_IINCHIP_PPP__ -#define PPP_OPTION_BUF_LEN 64 - -uint8 pppinit_in(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen); - - -/** -@brief make PPPoE connection -@return 1 => success to connect, 2 => Auth fail, 3 => timeout, 4 => Auth type not support - -*/ -uint8 pppinit(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen) -{ - uint8 ret; - uint8 isr; - - // PHASE0. W5100 PPPoE(ADSL) setup - // enable pppoe mode - printf("-- PHASE 0. W5100 PPPoE(ADSL) setup process --\r\n"); - printf("\r\n"); - IINCHIP_WRITE(MR,IINCHIP_READ(MR) | MR_PPPOE); - - // open socket in pppoe mode - isr = IINCHIP_READ(Sn_IR(0));// first clear isr(0), W5100 at present time - IINCHIP_WRITE(Sn_IR(0),isr); - - IINCHIP_WRITE(PTIMER,200); // 5sec timeout - IINCHIP_WRITE(PMAGIC,0x01); // magic number - IINCHIP_WRITE(Sn_MR(0),Sn_MR_PPPOE); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_OPEN); - - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - - ret = pppinit_in(id, idlen, passwd, passwdlen); - - // close ppp connection socket - /* +200801 (hwkim) */ - close(0); - /* ------- */ - - return ret; -} - - -uint8 pppinit_in(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen) -{ - uint8 loop_idx = 0; - uint8 isr = 0; - uint8 buf[PPP_OPTION_BUF_LEN]; - uint16 len; - uint8 str[PPP_OPTION_BUF_LEN]; - uint8 str_idx,dst_idx; - - // PHASE1. PPPoE Discovery - // start to connect pppoe connection - printf("-- PHASE 1. PPPoE Discovery process --"); - printf(" ok\r\n"); - printf("\r\n"); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCON); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - - wait_10ms(100); - - loop_idx = 0; - //check whether PPPoE discovery end or not - while (!(IINCHIP_READ(Sn_IR(0)) & Sn_IR_PNEXT)) - { - printf("."); - if (loop_idx++ == 10) // timeout - { - printf("timeout before LCP\r\n"); - return 3; - } - wait_10ms(100); - } - - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - - // PHASE2. LCP process - printf("-- PHASE 2. LCP process --"); - - // send LCP Request - { - // Magic number option - // option format (type value + length value + data) - // write magic number value - buf[0] = 0x05; // type value - buf[1] = 0x06; // length value - buf[2] = 0x01; buf[3] = 0x01; buf[4] = 0x01; buf[5]= 0x01; // data - // for MRU option, 1492 0x05d4 - // buf[6] = 0x01; buf[7] = 0x04; buf[8] = 0x05; buf[9] = 0xD4; - } - send_data_processing(0, buf, 0x06); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send request - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - - wait_10ms(100); - - while (!((isr = IINCHIP_READ(Sn_IR(0))) & Sn_IR_PNEXT)) - { - if (isr & Sn_IR_PRECV) // Not support option - { - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), Sn_IR_PRECV); - /*---*/ - len = getSn_RX_RSR(0); - if ( len > 0 ) - { - recv_data_processing(0, str, len); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - - // for debug - //printf("LCP proc\r\n"); for (i = 0; i < len; i++) printf ("%02x ", str[i]); printf("\r\n"); - // get option length - len = str[4]; len = ((len & 0x00ff) << 8) + str[5]; - len += 2; - str_idx = 6; dst_idx = 0; // ppp header is 6 byte, so starts at 6. - do - { - if ((str[str_idx] == 0x01) || (str[str_idx] == 0x02) || (str[str_idx] == 0x03) || (str[str_idx] == 0x05)) - { - // skip as length of support option. str_idx+1 is option's length. - str_idx += str[str_idx+1]; - } - else - { - // not support option , REJECT - memcpy((uint8 *)(buf+dst_idx), (uint8 *)(str+str_idx), str[str_idx+1]); - dst_idx += str[str_idx+1]; str_idx += str[str_idx+1]; - } - } while (str_idx != len); - // for debug - // printf("LCP dst proc\r\n"); for (i = 0; i < dst_idx; i++) printf ("%02x ", dst[i]); printf("\r\n"); - - // send LCP REJECT packet - send_data_processing(0, buf, dst_idx); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCJ); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - } - } - printf("."); - if (loop_idx++ == 10) // timeout - { - printf("timeout after LCP\r\n"); - return 3; - } - wait_10ms(100); - } - printf(" ok\r\n"); - printf("\r\n"); - - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - - printf("-- PHASE 3. PPPoE(ADSL) Authentication mode --\r\n"); - printf("Authentication protocol : %.2x %.2x, ", IINCHIP_READ(PATR0), IINCHIP_READ(PATR0+1)); - - loop_idx = 0; - if (IINCHIP_READ(PATR0) == 0xc0 && IINCHIP_READ(PATR0+1) == 0x23) - { - printf("PAP\r\n"); // in case of adsl normally supports PAP. - // send authentication data - // copy (idlen + id + passwdlen + passwd) - buf[loop_idx] = idlen; loop_idx++; - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(id), idlen); loop_idx += idlen; - buf[loop_idx] = passwdlen; loop_idx++; - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(passwd), passwdlen); loop_idx += passwdlen; - send_data_processing(0, buf, loop_idx); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_10ms(100); - } - else if (IINCHIP_READ(PATR0) == 0xc2 && IINCHIP_READ(PATR0+1) == 0x23) - { - uint8 chal_len; - md5_ctx context; - uint8 digest[16]; - - len = getSn_RX_RSR(0); - if ( len > 0 ) - { - recv_data_processing(0, str, len); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ -#ifdef __DEF_IINCHIP_DBG__ - printf("recv CHAP\r\n"); - { - int16 i; - - for (i = 0; i < 32; i++) - printf ("%02x ", str[i]); - } - printf("\r\n"); -#endif -// str is C2 23 xx CHAL_ID xx xx CHAP_LEN CHAP_DATA -// index 0 1 2 3 4 5 6 7 ... - - memset(buf,0x00,64); - buf[loop_idx] = str[3]; loop_idx++; // chal_id - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(passwd), passwdlen); loop_idx += passwdlen; //passwd - chal_len = str[6]; // chal_id - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(str+7), chal_len); loop_idx += chal_len; //challenge - buf[loop_idx] = 0x80; -#ifdef __DEF_IINCHIP_DBG__ - printf("CHAP proc d1\r\n"); - { - int16 i; - for (i = 0; i < 64; i++) - printf ("%02x ", buf[i]); - } - printf("\r\n"); -#endif - - md5_init(&context); - md5_update(&context, buf, loop_idx); - md5_final(digest, &context); - -#ifdef __DEF_IINCHIP_DBG__ - printf("CHAP proc d1\r\n"); - { - int16 i; - for (i = 0; i < 16; i++) - printf ("%02x", digest[i]); - } - printf("\r\n"); -#endif - loop_idx = 0; - buf[loop_idx] = 16; loop_idx++; // hash_len - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(digest), 16); loop_idx += 16; // hashed value - memcpy((uint8 *)(buf+loop_idx), (uint8 *)(id), idlen); loop_idx += idlen; // id - send_data_processing(0, buf, loop_idx); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_10ms(100); - } - } - else - { - printf("Not support\r\n"); -#ifdef __DEF_IINCHIP_DBG__ - printf("Not support PPP Auth type: %.2x%.2x\r\n",IINCHIP_READ(PATR0), IINCHIP_READ(PATR0+1)); -#endif - return 4; - } - printf("\r\n"); - - printf("-- Waiting for PPPoE server's admission --"); - loop_idx = 0; - while (!((isr = IINCHIP_READ(Sn_IR(0))) & Sn_IR_PNEXT)) - { - if (isr & Sn_IR_PFAIL) - { - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - printf("failed\r\nReinput id, password..\r\n"); - return 2; - } - printf("."); - if (loop_idx++ == 10) // timeout - { - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - printf("timeout after PAP\r\n"); - return 3; - } - wait_10ms(100); - } - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - printf("ok\r\n"); - printf("\r\n"); - printf("-- PHASE 4. IPCP process --"); - // IP Address - buf[0] = 0x03; buf[1] = 0x06; buf[2] = 0x00; buf[3] = 0x00; buf[4] = 0x00; buf[5] = 0x00; - send_data_processing(0, buf, 6); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_10ms(100); - - loop_idx = 0; - while (1) - { - if (IINCHIP_READ(Sn_IR(0)) & Sn_IR_PRECV) - { - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - len = getSn_RX_RSR(0); - if ( len > 0 ) - { - recv_data_processing(0, str, len); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - //for debug - //printf("IPCP proc\r\n"); for (i = 0; i < len; i++) printf ("%02x ", str[i]); printf("\r\n"); - str_idx = 6; dst_idx = 0; - if (str[2] == 0x03) // in case of NAK - { - do - { - if (str[str_idx] == 0x03) // request only ip information - { - memcpy((uint8 *)(buf+dst_idx), (uint8 *)(str+str_idx), str[str_idx+1]); - dst_idx += str[str_idx+1]; str_idx += str[str_idx+1]; - } - else - { - // skip byte - str_idx += str[str_idx+1]; - } - // for debug - //printf("s: %d, d: %d, l: %d", str_idx, dst_idx, len); - } while (str_idx != len); - send_data_processing(0, buf, dst_idx); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send ipcp request - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_10ms(100); - break; - } - } - } - printf("."); - if (loop_idx++ == 10) // timeout - { - printf("timeout after IPCP\r\n"); - return 3; - } - wait_10ms(100); - send_data_processing(0, buf, 6); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); //ipcp re-request - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - } - - loop_idx = 0; - while (!(IINCHIP_READ(Sn_IR(0)) & Sn_IR_PNEXT)) - { - printf("."); - if (loop_idx++ == 10) // timeout - { - printf("timeout after IPCP NAK\r\n"); - return 3; - } - wait_10ms(100); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send ipcp request - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - } - /* +200801[bj] clear interrupt value*/ - IINCHIP_WRITE(Sn_IR(0), 0xff); - /*---*/ - printf("ok\r\n"); - printf("\r\n"); - return 1; - // after this function, User must save the pppoe server's mac address and pppoe session id in current connection -} - - -/** -@brief terminate PPPoE connection -*/ -uint8 pppterm(uint8 * mac, uint8 * sessionid) -{ - uint16 i; - uint8 isr; -#ifdef __DEF_IINCHIP_DBG__ - printf("pppterm()\r\n"); -#endif - /* Set PPPoE bit in MR(Common Mode Register) : enable socket0 pppoe */ - IINCHIP_WRITE(MR,IINCHIP_READ(MR) | MR_PPPOE); - - // write pppoe server's mac address and session id - // must be setted these value. - for (i = 0; i < 6; i++) IINCHIP_WRITE((Sn_DHAR0(0)+i),mac[i]); - for (i = 0; i < 2; i++) IINCHIP_WRITE((Sn_DPORT0(0)+i),sessionid[i]); - isr = IINCHIP_READ(Sn_IR(0)); - IINCHIP_WRITE(Sn_IR(0),isr); - - //open socket in pppoe mode - IINCHIP_WRITE(Sn_MR(0),Sn_MR_PPPOE); - IINCHIP_WRITE(Sn_CR(0),Sn_CR_OPEN); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_1us(1); - // close pppoe connection - IINCHIP_WRITE(Sn_CR(0),Sn_CR_PDISCON); - /* +20071122[chungs]:wait to process the command... */ - while( IINCHIP_READ(Sn_CR(0)) ) - ; - /* ------- */ - wait_10ms(100); - // close socket - /* +200801 (hwkim) */ - close(0); - /* ------- */ - - -#ifdef __DEF_IINCHIP_DBG__ - printf("pppterm() end ..\r\n"); -#endif - - return 1; -} -#endif diff --git a/libraries/Ethernet/utility/w5100.h b/libraries/Ethernet/utility/w5100.h deleted file mode 100755 index 6eddf91..0000000 --- a/libraries/Ethernet/utility/w5100.h +++ /dev/null @@ -1,299 +0,0 @@ -/* -@file w5100.h -*/ - -#ifndef _W5100_H_ -#define _W5100_H_ - - -#define MR __DEF_IINCHIP_MAP_BASE__ -#define IDM_OR ((__DEF_IINCHIP_MAP_BASE__ + 0x00)) -#define IDM_AR0 ((__DEF_IINCHIP_MAP_BASE__ + 0x01)) -#define IDM_AR1 ((__DEF_IINCHIP_MAP_BASE__ + 0x02)) -#define IDM_DR ((__DEF_IINCHIP_MAP_BASE__ + 0x03)) - - -/** - @brief Gateway IP Register address - */ -#define GAR0 (COMMON_BASE + 0x0001) -/** - @brief Subnet mask Register address - */ -#define SUBR0 (COMMON_BASE + 0x0005) -/** - @brief Source MAC Register address - */ -#define SHAR0 (COMMON_BASE + 0x0009) -/** - @brief Source IP Register address - */ -#define SIPR0 (COMMON_BASE + 0x000F) -/** - @brief Interrupt Register - */ -#define IR (COMMON_BASE + 0x0015) -/** - @brief Interrupt mask register - */ -#define IMR (COMMON_BASE + 0x0016) -/** - @brief Timeout register address( 1 is 100us ) - */ -#define RTR0 (COMMON_BASE + 0x0017) -/** - @brief Retry count reigster - */ -#define RCR (COMMON_BASE + 0x0019) -/** - @brief Receive memory size reigster - */ -#define RMSR (COMMON_BASE + 0x001A) -/** - @brief Transmit memory size reigster - */ -#define TMSR (COMMON_BASE + 0x001B) -/** - @brief Authentication type register address in PPPoE mode - */ -#define PATR0 (COMMON_BASE + 0x001C) -//#define PPPALGO (COMMON_BASE + 0x001D) -#define PTIMER (COMMON_BASE + 0x0028) -#define PMAGIC (COMMON_BASE + 0x0029) - -/** - @brief Unreachable IP register address in UDP mode - */ -#define UIPR0 (COMMON_BASE + 0x002A) -/** - @brief Unreachable Port register address in UDP mode - */ -#define UPORT0 (COMMON_BASE + 0x002E) - -/** - @brief socket register -*/ -#define CH_BASE (COMMON_BASE + 0x0400) -/** - @brief size of each channel register map - */ -#define CH_SIZE 0x0100 -/** - @brief socket Mode register - */ -#define Sn_MR(ch) (CH_BASE + ch * CH_SIZE + 0x0000) -/** - @brief channel Sn_CR register - */ -#define Sn_CR(ch) (CH_BASE + ch * CH_SIZE + 0x0001) -/** - @brief channel interrupt register - */ -#define Sn_IR(ch) (CH_BASE + ch * CH_SIZE + 0x0002) -/** - @brief channel status register - */ -#define Sn_SR(ch) (CH_BASE + ch * CH_SIZE + 0x0003) -/** - @brief source port register - */ -#define Sn_PORT0(ch) (CH_BASE + ch * CH_SIZE + 0x0004) -/** - @brief Peer MAC register address - */ -#define Sn_DHAR0(ch) (CH_BASE + ch * CH_SIZE + 0x0006) -/** - @brief Peer IP register address - */ -#define Sn_DIPR0(ch) (CH_BASE + ch * CH_SIZE + 0x000C) -/** - @brief Peer port register address - */ -#define Sn_DPORT0(ch) (CH_BASE + ch * CH_SIZE + 0x0010) -/** - @brief Maximum Segment Size(Sn_MSSR0) register address - */ -#define Sn_MSSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0012) -/** - @brief Protocol of IP Header field register in IP raw mode - */ -#define Sn_PROTO(ch) (CH_BASE + ch * CH_SIZE + 0x0014) - -/** - @brief IP Type of Service(TOS) Register - */ -#define Sn_TOS(ch) (CH_BASE + ch * CH_SIZE + 0x0015) -/** - @brief IP Time to live(TTL) Register - */ -#define Sn_TTL(ch) (CH_BASE + ch * CH_SIZE + 0x0016) - -/** - @brief Transmit free memory size register - */ -#define Sn_TX_FSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0020) -/** - @brief Transmit memory read pointer register address - */ -#define Sn_TX_RD0(ch) (CH_BASE + ch * CH_SIZE + 0x0022) -/** - @brief Transmit memory write pointer register address - */ -#define Sn_TX_WR0(ch) (CH_BASE + ch * CH_SIZE + 0x0024) -/** - @brief Received data size register - */ -#define Sn_RX_RSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0026) -/** - @brief Read point of Receive memory - */ -#define Sn_RX_RD0(ch) (CH_BASE + ch * CH_SIZE + 0x0028) -/** - @brief Write point of Receive memory - */ -#define Sn_RX_WR0(ch) (CH_BASE + ch * CH_SIZE + 0x002A) - - - -/* MODE register values */ -#define MR_RST 0x80 /**< reset */ -#define MR_PB 0x10 /**< ping block */ -#define MR_PPPOE 0x08 /**< enable pppoe */ -#define MR_LB 0x04 /**< little or big endian selector in indirect mode */ -#define MR_AI 0x02 /**< auto-increment in indirect mode */ -#define MR_IND 0x01 /**< enable indirect mode */ - -/* IR register values */ -#define IR_CONFLICT 0x80 /**< check ip confict */ -#define IR_UNREACH 0x40 /**< get the destination unreachable message in UDP sending */ -#define IR_PPPoE 0x20 /**< get the PPPoE close message */ -#define IR_SOCK(ch) (0x01 << ch) /**< check socket interrupt */ - -/* Sn_MR values */ -#define Sn_MR_CLOSE 0x00 /**< unused socket */ -#define Sn_MR_TCP 0x01 /**< TCP */ -#define Sn_MR_UDP 0x02 /**< UDP */ -#define Sn_MR_IPRAW 0x03 /**< IP LAYER RAW SOCK */ -#define Sn_MR_MACRAW 0x04 /**< MAC LAYER RAW SOCK */ -#define Sn_MR_PPPOE 0x05 /**< PPPoE */ -#define Sn_MR_ND 0x20 /**< No Delayed Ack(TCP) flag */ -#define Sn_MR_MULTI 0x80 /**< support multicating */ - - -/* Sn_CR values */ -#define Sn_CR_OPEN 0x01 /**< initialize or open socket */ -#define Sn_CR_LISTEN 0x02 /**< wait connection request in tcp mode(Server mode) */ -#define Sn_CR_CONNECT 0x04 /**< send connection request in tcp mode(Client mode) */ -#define Sn_CR_DISCON 0x08 /**< send closing reqeuset in tcp mode */ -#define Sn_CR_CLOSE 0x10 /**< close socket */ -#define Sn_CR_SEND 0x20 /**< updata txbuf pointer, send data */ -#define Sn_CR_SEND_MAC 0x21 /**< send data with MAC address, so without ARP process */ -#define Sn_CR_SEND_KEEP 0x22 /**< send keep alive message */ -#define Sn_CR_RECV 0x40 /**< update rxbuf pointer, recv data */ - -#ifdef __DEF_IINCHIP_PPP__ - #define Sn_CR_PCON 0x23 - #define Sn_CR_PDISCON 0x24 - #define Sn_CR_PCR 0x25 - #define Sn_CR_PCN 0x26 - #define Sn_CR_PCJ 0x27 -#endif - -/* Sn_IR values */ -#ifdef __DEF_IINCHIP_PPP__ - #define Sn_IR_PRECV 0x80 - #define Sn_IR_PFAIL 0x40 - #define Sn_IR_PNEXT 0x20 -#endif -#define Sn_IR_SEND_OK 0x10 /**< complete sending */ -#define Sn_IR_TIMEOUT 0x08 /**< assert timeout */ -#define Sn_IR_RECV 0x04 /**< receiving data */ -#define Sn_IR_DISCON 0x02 /**< closed socket */ -#define Sn_IR_CON 0x01 /**< established connection */ - -/* Sn_SR values */ -#define SOCK_CLOSED 0x00 /**< closed */ -#define SOCK_INIT 0x13 /**< init state */ -#define SOCK_LISTEN 0x14 /**< listen state */ -#define SOCK_SYNSENT 0x15 /**< connection state */ -#define SOCK_SYNRECV 0x16 /**< connection state */ -#define SOCK_ESTABLISHED 0x17 /**< success to connect */ -#define SOCK_FIN_WAIT 0x18 /**< closing state */ -#define SOCK_CLOSING 0x1A /**< closing state */ -#define SOCK_TIME_WAIT 0x1B /**< closing state */ -#define SOCK_CLOSE_WAIT 0x1C /**< closing state */ -#define SOCK_LAST_ACK 0x1D /**< closing state */ -#define SOCK_UDP 0x22 /**< udp socket */ -#define SOCK_IPRAW 0x32 /**< ip raw mode socket */ -#define SOCK_MACRAW 0x42 /**< mac raw mode socket */ -#define SOCK_PPPOE 0x5F /**< pppoe socket */ - -/* IP PROTOCOL */ -#define IPPROTO_IP 0 /**< Dummy for IP */ -#define IPPROTO_ICMP 1 /**< Control message protocol */ -#define IPPROTO_IGMP 2 /**< Internet group management protocol */ -#define IPPROTO_GGP 3 /**< Gateway^2 (deprecated) */ -#define IPPROTO_TCP 6 /**< TCP */ -#define IPPROTO_PUP 12 /**< PUP */ -#define IPPROTO_UDP 17 /**< UDP */ -#define IPPROTO_IDP 22 /**< XNS idp */ -#define IPPROTO_ND 77 /**< UNOFFICIAL net disk protocol */ -#define IPPROTO_RAW 255 /**< Raw IP packet */ - - -/********************************************************* -* iinchip access function -*********************************************************/ -extern uint8 IINCHIP_READ(uint16 addr); -extern uint8 IINCHIP_WRITE(uint16 addr,uint8 data); -extern uint16 wiz_read_buf(uint16 addr, uint8* buf,uint16 len); -extern uint16 wiz_write_buf(uint16 addr,uint8* buf,uint16 len); - -extern void iinchip_init(void); // reset iinchip -extern void sysinit(uint8 tx_size, uint8 rx_size); // setting tx/rx buf size -extern uint8 getISR(uint8 s); -extern void putISR(uint8 s, uint8 val); -extern uint16 getIINCHIP_RxMAX(uint8 s); -extern uint16 getIINCHIP_TxMAX(uint8 s); -extern uint16 getIINCHIP_RxMASK(uint8 s); -extern uint16 getIINCHIP_TxMASK(uint8 s); -extern uint16 getIINCHIP_RxBASE(uint8 s); -extern uint16 getIINCHIP_TxBASE(uint8 s); -extern void setGAR(uint8 * addr); // set gateway address -extern void setSUBR(uint8 * addr); // set subnet mask address -extern void setSHAR(uint8 * addr); // set local MAC address -extern void setSIPR(uint8 * addr); // set local IP address -extern void setRTR(uint16 timeout); // set retry duration for data transmission, connection, closing ... -extern void setRCR(uint8 retry); // set retry count (above the value, assert timeout interrupt) -extern void setIMR(uint8 mask); // set interrupt mask. -extern void getGAR(uint8 * addr); -extern void getSUBR(uint8 * addr); -extern void getSHAR(uint8 * addr); -extern void getSIPR(uint8 * addr); -extern uint8 getIR( void ); -extern void setSn_MSS(SOCKET s, uint16 Sn_MSSR0); // set maximum segment size -extern void setSn_PROTO(SOCKET s, uint8 proto); // set IP Protocol value using IP-Raw mode -extern uint8 getSn_IR(SOCKET s); // get socket interrupt status -extern uint8 getSn_SR(SOCKET s); // get socket status -extern uint16 getSn_TX_FSR(SOCKET s); // get socket TX free buf size -extern uint16 getSn_RX_RSR(SOCKET s); // get socket RX recv buf size -extern void setSn_DHAR(SOCKET s, uint8 * addr); -extern void setSn_DIPR(SOCKET s, uint8 * addr); -extern void setSn_DPORT(SOCKET s, uint8 * addr); -extern void getSn_DHAR(SOCKET s, uint8 * addr); -extern void getSn_DIPR(SOCKET s, uint8 * addr); -extern void getSn_DPORT(SOCKET s, uint8 * addr); -extern void setSn_TTL(SOCKET s, uint8 ttl); -extern void setMR(uint8 val); - -#ifdef __DEF_IINCHIP_PPP__ -extern uint8 pppinit(uint8 *id, uint8 idlen, uint8 *passwd, uint8 passwdlen); -extern uint8 pppterm(uint8 *mac,uint8 *sessionid); -#endif - -extern void send_data_processing(SOCKET s, uint8 *data, uint16 len); -extern void recv_data_processing(SOCKET s, uint8 *data, uint16 len); -extern void read_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len); -extern void write_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len); - -#endif -- cgit v1.2.3-18-g5258