From 8c2b5b979a75d109ae7cc306afc50d7ffe1e0366 Mon Sep 17 00:00:00 2001
From: Cristian Maglie <c.maglie@bug.st>
Date: Wed, 4 Jan 2012 15:14:51 +0100
Subject: Moved libraries folder inside platform folder. Now libraries and
examples are searched per board/platform
---
libraries/Ethernet/utility/socket.cpp | 400 ++++++++++++++++++++++++++++++++++
1 file changed, 400 insertions(+)
create mode 100644 libraries/Ethernet/utility/socket.cpp
(limited to 'libraries/Ethernet/utility/socket.cpp')
diff --git a/libraries/Ethernet/utility/socket.cpp b/libraries/Ethernet/utility/socket.cpp
new file mode 100644
index 0000000..fd3e442
--- /dev/null
+++ b/libraries/Ethernet/utility/socket.cpp
@@ -0,0 +1,400 @@
+#include "w5100.h"
+#include "socket.h"
+
+static uint16_t local_port;
+
+/**
+ * @brief This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it.
+ * @return 1 for success else 0.
+ */
+uint8_t socket(SOCKET s, uint8_t protocol, uint16_t port, uint8_t flag)
+{
+ if ((protocol == SnMR::TCP) || (protocol == SnMR::UDP) || (protocol == SnMR::IPRAW) || (protocol == SnMR::MACRAW) || (protocol == SnMR::PPPOE))
+ {
+ close(s);
+ W5100.writeSnMR(s, protocol | flag);
+ if (port != 0) {
+ W5100.writeSnPORT(s, port);
+ }
+ else {
+ local_port++; // if don't set the source port, set local_port number.
+ W5100.writeSnPORT(s, local_port);
+ }
+
+ W5100.execCmdSn(s, Sock_OPEN);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+
+/**
+ * @brief This function close the socket and parameter is "s" which represent the socket number
+ */
+void close(SOCKET s)
+{
+ W5100.execCmdSn(s, Sock_CLOSE);
+ W5100.writeSnIR(s, 0xFF);
+}
+
+
+/**
+ * @brief This function established the connection for the channel in passive (server) mode. This function waits for the request from the peer.
+ * @return 1 for success else 0.
+ */
+uint8_t listen(SOCKET s)
+{
+ if (W5100.readSnSR(s) != SnSR::INIT)
+ return 0;
+ W5100.execCmdSn(s, Sock_LISTEN);
+ return 1;
+}
+
+
+/**
+ * @brief This function established the connection for the channel in Active (client) mode.
+ * This function waits for the untill the connection is established.
+ *
+ * @return 1 for success else 0.
+ */
+uint8_t connect(SOCKET s, uint8_t * addr, uint16_t port)
+{
+ if
+ (
+ ((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) ||
+ ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
+ (port == 0x00)
+ )
+ return 0;
+
+ // set destination IP
+ W5100.writeSnDIPR(s, addr);
+ W5100.writeSnDPORT(s, port);
+ W5100.execCmdSn(s, Sock_CONNECT);
+
+ return 1;
+}
+
+
+
+/**
+ * @brief This function used for disconnect the socket and parameter is "s" which represent the socket number
+ * @return 1 for success else 0.
+ */
+void disconnect(SOCKET s)
+{
+ W5100.execCmdSn(s, Sock_DISCON);
+}
+
+
+/**
+ * @brief This function used to send the data in TCP mode
+ * @return 1 for success else 0.
+ */
+uint16_t send(SOCKET s, const uint8_t * buf, uint16_t len)
+{
+ uint8_t status=0;
+ uint16_t ret=0;
+ uint16_t freesize=0;
+
+ if (len > W5100.SSIZE)
+ ret = W5100.SSIZE; // check size not to exceed MAX size.
+ else
+ ret = len;
+
+ // if freebuf is available, start.
+ do
+ {
+ freesize = W5100.getTXFreeSize(s);
+ status = W5100.readSnSR(s);
+ if ((status != SnSR::ESTABLISHED) && (status != SnSR::CLOSE_WAIT))
+ {
+ ret = 0;
+ break;
+ }
+ }
+ while (freesize < ret);
+
+ // copy data
+ W5100.send_data_processing(s, (uint8_t *)buf, ret);
+ W5100.execCmdSn(s, Sock_SEND);
+
+ /* +2008.01 bj */
+ while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
+ {
+ /* m2008.01 [bj] : reduce code */
+ if ( W5100.readSnSR(s) == SnSR::CLOSED )
+ {
+ close(s);
+ return 0;
+ }
+ }
+ /* +2008.01 bj */
+ W5100.writeSnIR(s, SnIR::SEND_OK);
+ return ret;
+}
+
+
+/**
+ * @brief This function is an application I/F function which is used to receive the data in TCP mode.
+ * It continues to wait for data as much as the application wants to receive.
+ *
+ * @return received data size for success else -1.
+ */
+int16_t recv(SOCKET s, uint8_t *buf, int16_t len)
+{
+ // Check how much data is available
+ int16_t ret = W5100.getRXReceivedSize(s);
+ if ( ret == 0 )
+ {
+ // No data available.
+ uint8_t status = W5100.readSnSR(s);
+ if ( status == SnSR::LISTEN || status == SnSR::CLOSED || status == SnSR::CLOSE_WAIT )
+ {
+ // The remote end has closed its side of the connection, so this is the eof state
+ ret = 0;
+ }
+ else
+ {
+ // The connection is still up, but there's no data waiting to be read
+ ret = -1;
+ }
+ }
+ else if (ret > len)
+ {
+ ret = len;
+ }
+
+ if ( ret > 0 )
+ {
+ W5100.recv_data_processing(s, buf, ret);
+ W5100.execCmdSn(s, Sock_RECV);
+ }
+ return ret;
+}
+
+
+/**
+ * @brief Returns the first byte in the receive queue (no checking)
+ *
+ * @return
+ */
+uint16_t peek(SOCKET s, uint8_t *buf)
+{
+ W5100.recv_data_processing(s, buf, 1, 1);
+
+ return 1;
+}
+
+
+/**
+ * @brief This function is an application I/F function which is used to send the data for other then TCP mode.
+ * Unlike TCP transmission, The peer's destination address and the port is needed.
+ *
+ * @return This function return send data size for success else -1.
+ */
+uint16_t sendto(SOCKET s, const uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t port)
+{
+ uint16_t ret=0;
+
+ if (len > W5100.SSIZE) ret = W5100.SSIZE; // check size not to exceed MAX size.
+ else ret = len;
+
+ if
+ (
+ ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
+ ((port == 0x00)) ||(ret == 0)
+ )
+ {
+ /* +2008.01 [bj] : added return value */
+ ret = 0;
+ }
+ else
+ {
+ W5100.writeSnDIPR(s, addr);
+ W5100.writeSnDPORT(s, port);
+
+ // copy data
+ W5100.send_data_processing(s, (uint8_t *)buf, ret);
+ W5100.execCmdSn(s, Sock_SEND);
+
+ /* +2008.01 bj */
+ while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
+ {
+ if (W5100.readSnIR(s) & SnIR::TIMEOUT)
+ {
+ /* +2008.01 [bj]: clear interrupt */
+ W5100.writeSnIR(s, (SnIR::SEND_OK | SnIR::TIMEOUT)); /* clear SEND_OK & TIMEOUT */
+ return 0;
+ }
+ }
+
+ /* +2008.01 bj */
+ W5100.writeSnIR(s, SnIR::SEND_OK);
+ }
+ return ret;
+}
+
+
+/**
+ * @brief This function is an application I/F function which is used to receive the data in other then
+ * TCP mode. This function is used to receive UDP, IP_RAW and MAC_RAW mode, and handle the header as well.
+ *
+ * @return This function return received data size for success else -1.
+ */
+uint16_t recvfrom(SOCKET s, uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t *port)
+{
+ uint8_t head[8];
+ uint16_t data_len=0;
+ uint16_t ptr=0;
+
+ if ( len > 0 )
+ {
+ ptr = W5100.readSnRX_RD(s);
+ switch (W5100.readSnMR(s) & 0x07)
+ {
+ case SnMR::UDP :
+ W5100.read_data(s, (uint8_t *)ptr, head, 0x08);
+ ptr += 8;
+ // read peer's IP address, port number.
+ addr[0] = head[0];
+ addr[1] = head[1];
+ addr[2] = head[2];
+ addr[3] = head[3];
+ *port = head[4];
+ *port = (*port << 8) + head[5];
+ data_len = head[6];
+ data_len = (data_len << 8) + head[7];
+
+ W5100.read_data(s, (uint8_t *)ptr, buf, data_len); // data copy.
+ ptr += data_len;
+
+ W5100.writeSnRX_RD(s, ptr);
+ break;
+
+ case SnMR::IPRAW :
+ W5100.read_data(s, (uint8_t *)ptr, head, 0x06);
+ ptr += 6;
+
+ addr[0] = head[0];
+ addr[1] = head[1];
+ addr[2] = head[2];
+ addr[3] = head[3];
+ data_len = head[4];
+ data_len = (data_len << 8) + head[5];
+
+ W5100.read_data(s, (uint8_t *)ptr, buf, data_len); // data copy.
+ ptr += data_len;
+
+ W5100.writeSnRX_RD(s, ptr);
+ break;
+
+ case SnMR::MACRAW:
+ W5100.read_data(s,(uint8_t*)ptr,head,2);
+ ptr+=2;
+ data_len = head[0];
+ data_len = (data_len<<8) + head[1] - 2;
+
+ W5100.read_data(s,(uint8_t*) ptr,buf,data_len);
+ ptr += data_len;
+ W5100.writeSnRX_RD(s, ptr);
+ break;
+
+ default :
+ break;
+ }
+ W5100.execCmdSn(s, Sock_RECV);
+ }
+ return data_len;
+}
+
+
+uint16_t igmpsend(SOCKET s, const uint8_t * buf, uint16_t len)
+{
+ uint8_t status=0;
+ uint16_t ret=0;
+
+ if (len > W5100.SSIZE)
+ ret = W5100.SSIZE; // check size not to exceed MAX size.
+ else
+ ret = len;
+
+ if (ret == 0)
+ return 0;
+
+ W5100.send_data_processing(s, (uint8_t *)buf, ret);
+ W5100.execCmdSn(s, Sock_SEND);
+
+ while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
+ {
+ status = W5100.readSnSR(s);
+ if (W5100.readSnIR(s) & SnIR::TIMEOUT)
+ {
+ /* in case of igmp, if send fails, then socket closed */
+ /* if you want change, remove this code. */
+ close(s);
+ return 0;
+ }
+ }
+
+ W5100.writeSnIR(s, SnIR::SEND_OK);
+ return ret;
+}
+
+uint16_t bufferData(SOCKET s, uint16_t offset, const uint8_t* buf, uint16_t len)
+{
+ uint16_t ret =0;
+ if (len > W5100.getTXFreeSize(s))
+ {
+ ret = W5100.getTXFreeSize(s); // check size not to exceed MAX size.
+ }
+ else
+ {
+ ret = len;
+ }
+ W5100.send_data_processing_offset(s, offset, buf, ret);
+ return ret;
+}
+
+int startUDP(SOCKET s, uint8_t* addr, uint16_t port)
+{
+ if
+ (
+ ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
+ ((port == 0x00))
+ )
+ {
+ return 0;
+ }
+ else
+ {
+ W5100.writeSnDIPR(s, addr);
+ W5100.writeSnDPORT(s, port);
+ return 1;
+ }
+}
+
+int sendUDP(SOCKET s)
+{
+ W5100.execCmdSn(s, Sock_SEND);
+
+ /* +2008.01 bj */
+ while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
+ {
+ if (W5100.readSnIR(s) & SnIR::TIMEOUT)
+ {
+ /* +2008.01 [bj]: clear interrupt */
+ W5100.writeSnIR(s, (SnIR::SEND_OK|SnIR::TIMEOUT));
+ return 0;
+ }
+ }
+
+ /* +2008.01 bj */
+ W5100.writeSnIR(s, SnIR::SEND_OK);
+
+ /* Sent ok */
+ return 1;
+}
+
--
cgit v1.2.3-18-g5258