From 4bfbbb3484cbc8ffccb90609e59a04796f618470 Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Wed, 26 Jun 2013 19:13:04 +0200
Subject: Ethernet, SD and LiquidCrystal to the new library format

---
 .../Ethernet/examples/WebClient/WebClient.ino      | 88 ----------------------
 1 file changed, 88 deletions(-)
 delete mode 100644 libraries/Ethernet/examples/WebClient/WebClient.ino

(limited to 'libraries/Ethernet/examples/WebClient')

diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino
deleted file mode 100644
index 40523a4..0000000
--- a/libraries/Ethernet/examples/WebClient/WebClient.ino
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-  Web client
- 
- This sketch connects to a website (http://www.google.com)
- using an Arduino Wiznet Ethernet shield. 
- 
- Circuit:
- * Ethernet shield attached to pins 10, 11, 12, 13
- 
- created 18 Dec 2009
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe, based on work by Adrian McEwen
- 
- */
-
-#include <SPI.h>
-#include <Ethernet.h>
-
-// Enter a MAC address for your controller below.
-// Newer Ethernet shields have a MAC address printed on a sticker on the shield
-byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
-char server[] = "www.google.com";    // name address for Google (using DNS)
-
-// Set the static IP address to use if the DHCP fails to assign
-IPAddress ip(192,168,0,177);
-
-// Initialize the Ethernet client library
-// with the IP address and port of the server 
-// that you want to connect to (port 80 is default for HTTP):
-EthernetClient client;
-
-void setup() {
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  // start the Ethernet connection:
-  if (Ethernet.begin(mac) == 0) {
-    Serial.println("Failed to configure Ethernet using DHCP");
-    // no point in carrying on, so do nothing forevermore:
-    // try to congifure using IP address instead of DHCP:
-    Ethernet.begin(mac, ip);
-  }
-  // give the Ethernet shield a second to initialize:
-  delay(1000);
-  Serial.println("connecting...");
-
-  // if you get a connection, report back via serial:
-  if (client.connect(server, 80)) {
-    Serial.println("connected");
-    // Make a HTTP request:
-    client.println("GET /search?q=arduino HTTP/1.1");
-    client.println("Host: www.google.com");
-    client.println("Connection: close");
-    client.println();
-  } 
-  else {
-    // kf you didn't get a connection to the server:
-    Serial.println("connection failed");
-  }
-}
-
-void loop()
-{
-  // if there are incoming bytes available 
-  // from the server, read them and print them:
-  if (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if the server's disconnected, stop the client:
-  if (!client.connected()) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-
-    // do nothing forevermore:
-    while(true);
-  }
-}
-
-- 
cgit v1.2.3-18-g5258