From 4bfbbb3484cbc8ffccb90609e59a04796f618470 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Wed, 26 Jun 2013 19:13:04 +0200 Subject: Ethernet, SD and LiquidCrystal to the new library format --- .../UDPSendReceiveString/UDPSendReceiveString.ino | 118 --------------------- 1 file changed, 118 deletions(-) delete mode 100644 libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino (limited to 'libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino') diff --git a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino deleted file mode 100644 index 4d4045c..0000000 --- a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino +++ /dev/null @@ -1,118 +0,0 @@ -/* - UDPSendReceive.pde: - This sketch receives UDP message strings, prints them to the serial port - and sends an "acknowledge" string back to the sender - - A Processing sketch is included at the end of file that can be used to send - and received messages for testing with a computer. - - created 21 Aug 2010 - by Michael Margolis - - This code is in the public domain. - */ - - -#include // needed for Arduino versions later than 0018 -#include -#include // UDP library from: bjoern@cs.stanford.edu 12/30/2008 - - -// Enter a MAC address and IP address for your controller below. -// The IP address will be dependent on your local network: -byte mac[] = { - 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; -IPAddress ip(192, 168, 1, 177); - -unsigned int localPort = 8888; // local port to listen on - -// buffers for receiving and sending data -char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet, -char ReplyBuffer[] = "acknowledged"; // a string to send back - -// An EthernetUDP instance to let us send and receive packets over UDP -EthernetUDP Udp; - -void setup() { - // start the Ethernet and UDP: - Ethernet.begin(mac,ip); - Udp.begin(localPort); - - Serial.begin(9600); -} - -void loop() { - // if there's data available, read a packet - int packetSize = Udp.parsePacket(); - if(packetSize) - { - Serial.print("Received packet of size "); - Serial.println(packetSize); - Serial.print("From "); - IPAddress remote = Udp.remoteIP(); - for (int i =0; i < 4; i++) - { - Serial.print(remote[i], DEC); - if (i < 3) - { - Serial.print("."); - } - } - Serial.print(", port "); - Serial.println(Udp.remotePort()); - - // read the packet into packetBufffer - Udp.read(packetBuffer,UDP_TX_PACKET_MAX_SIZE); - Serial.println("Contents:"); - Serial.println(packetBuffer); - - // send a reply, to the IP address and port that sent us the packet we received - Udp.beginPacket(Udp.remoteIP(), Udp.remotePort()); - Udp.write(ReplyBuffer); - Udp.endPacket(); - } - delay(10); -} - - -/* - Processing sketch to run with this example - ===================================================== - - // Processing UDP example to send and receive string data from Arduino - // press any key to send the "Hello Arduino" message - - - import hypermedia.net.*; - - UDP udp; // define the UDP object - - - void setup() { - udp = new UDP( this, 6000 ); // create a new datagram connection on port 6000 - //udp.log( true ); // <-- printout the connection activity - udp.listen( true ); // and wait for incoming message - } - - void draw() - { - } - - void keyPressed() { - String ip = "192.168.1.177"; // the remote IP address - int port = 8888; // the destination port - - udp.send("Hello World", ip, port ); // the message to send - - } - - void receive( byte[] data ) { // <-- default handler - //void receive( byte[] data, String ip, int port ) { // <-- extended handler - - for(int i=0; i < data.length; i++) - print(char(data[i])); - println(); - } - */ - - -- cgit v1.2.3-18-g5258