From c01bc2b62f76a5d417e5ed13dcb0c047a4f67224 Mon Sep 17 00:00:00 2001
From: Cristian Maglie <c.maglie@bug.st>
Date: Sun, 6 Jan 2013 18:38:03 +0100
Subject: Merged upcoming 1.0.4 and updated revision log

---
 .../Esplora/examples/EsploraKart/EsploraKart.ino   | 125 ---------------------
 1 file changed, 125 deletions(-)
 delete mode 100644 libraries/Esplora/examples/EsploraKart/EsploraKart.ino

(limited to 'libraries/Esplora/examples/EsploraKart')

diff --git a/libraries/Esplora/examples/EsploraKart/EsploraKart.ino b/libraries/Esplora/examples/EsploraKart/EsploraKart.ino
deleted file mode 100644
index 4c1621c..0000000
--- a/libraries/Esplora/examples/EsploraKart/EsploraKart.ino
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
-  Esplora Kart
-
-  This sketch turns the Esplora into a PC game pad.
-
-  It uses the both the analog joystick and the four switches.
-  By moving the joystick in a direction or by pressing a switch,
-  the PC will "see" that a key is pressed. If the PC is running
-  a game that has keyboard input, the Esplora can control it.
-  
-  The default configuration is suitable for SuperTuxKart, an
-  open-source racing game. It can be downloaded from
-  http://supertuxkart.sourceforge.net/ .
-
-  Created on 22 november 2012
-  By Enrico Gueli <enrico.gueli@gmail.com>
-*/
-
-
-#include <Esplora.h>
-
-/*
-  You're going to handle eight different buttons. You'll use arrays, 
-  which are ordered lists of variables with a fixed size. Each array 
-  has an index (counting from 0) to keep track of the position
-  you're reading in the array, and each position can contain a number.
- 
-  This code uses three different arrays: one for the buttons you'll read;
-  a second to hold the current states of those buttons; and a third to hold
-  the keystrokes associated with each button.
- */
-
-/*
-  This array holds the last sensed state of each of the buttons
-  you're reading.
-  Later in the code, you'll read the button states, and compare them
-  to the previous states that are stored in this array. If the two
-  states are different, it means that the button was either
-  pressed or released.
- */
-boolean buttonStates[8];
-
-/*
-  This array holds the names of the buttons being read.
-  Later in the sketch, you'll use these names with
-  the method Esplora.readButton(x), where x
-  is one of these buttons.
- */
-const byte buttons[] = {
-  JOYSTICK_DOWN,
-  JOYSTICK_LEFT,
-  JOYSTICK_UP,
-  JOYSTICK_RIGHT,
-  SWITCH_RIGHT, // fire
-  SWITCH_LEFT, // bend
-  SWITCH_UP, // nitro
-  SWITCH_DOWN, // look back
-};
-
-/*
-  This array tells what keystroke to send to the PC when a
-  button is pressed.
-  If you look at this array and the above one, you can see that
-  the "cursor down" keystroke is sent when the joystick is moved
-  down, the "cursor up" keystroke when the joystick is moved up
-  and so on.
-*/
-const char keystrokes[] = {
-  KEY_DOWN_ARROW,
-  KEY_LEFT_ARROW,
-  KEY_UP_ARROW,
-  KEY_RIGHT_ARROW,
-  ' ',
-  'V',
-  'N',
-  'B'
-};
-
-/*
-  This is code is run only at startup, to initialize the
-  virtual USB keyboard.
-*/
-void setup() {
-  Keyboard.begin();
-}
-
-/*
-  After setup() is finished, this code is run continuously.
-  Here we continuously check if something happened with the
-  buttons.
-*/
-void loop() { 
-  
-  // Iterate through all the buttons:
-  for (byte thisButton=0; thisButton<8; thisButton++) {
-    boolean lastState = buttonStates[thisButton];
-    boolean newState = Esplora.readButton(buttons[thisButton]);
-    if (lastState != newState) { // Something changed!
-      /* 
-        The Keyboard library allows you to "press" and "release" the
-        keys as two distinct actions. These actions can be
-        linked to the buttons we're handling.
-       */
-      if (newState == PRESSED) {
-        Keyboard.press(keystrokes[thisButton]);
-      }
-      else if (newState == RELEASED) {
-        Keyboard.release(keystrokes[thisButton]);
-      }
-    }
-
-    // Store the new button state, so you can sense a difference later:
-    buttonStates[thisButton] = newState;
-  }
-  
-  /*
-    Wait a little bit (50ms) between a check and another.
-    When a mechanical switch is pressed or released, the
-    contacts may bounce very rapidly. If the check is done too
-    fast, these bounces may be confused as multiple presses and
-    may lead to unexpected behaviour.
-   */
-  delay(50);
-}
-
-- 
cgit v1.2.3-18-g5258